I put it on my st250, but the OEM handlebar made me look awkward when riding.
The quality is not luxurious, but it feels solid!
- Instock
93.47 AED (3,781 JPY)
Webike Point: +38 pt
(0.93 AED)
معلومات التوصيل
In Stock : 3 left, Ships within 24 hours.
Estimated arrival date around
FITMENT
HONDA
-
APE 50
-07|08 (Carburetor) *Ape 100 (09-) only:switch hole drilling required
-
APE 100
-12 (drum brakes) *Ape 100 (09-) requires drilling of switch holes
-
VTR250
09-12 MC33 (1300001-)(FI car) *Processing to drill switch hole is required|* Required side cap (for 18mm diameter)
-
VTR250
03-07 MC33 (1020001-)*Processing of switch hole required|* Required side cap (for 18mm ID)
اظهار الكل
HONDA
YAMAHA
-
SR500
88-00 (CV carburetor) *Processing to drill switch holes is required
-
SR400
88-00 (CV carburetor) *Processing to drill switch holes is required
-
SR400
01-12 (Carb/FI Disc Brake Car) *Processing of switch hole is required
-
XJR400R
01-07 RH02J *Processing to open switch hole required|*Side cap required (for 18mm diameter)
اظهار الكل
YAMAHA
SUZUKI
-
GRASS TRACKER Big Boy
09-12 (FI car)*You can use stock side caps.
-
GRASS TRACKER Big Boy
-08 (Carburetor)*Drilling of switch holes is required. |*It is necessary to change the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
-
GRASS TRACKER
09-12 09-12(FI cars)*Side caps can be used with the stock ones.
-
GRASS TRACKER
-08 (Carburetor)*Drilling of switch holes is required. |*It is necessary to change the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
اظهار الكل
SUZUKI
KAWASAKI
-
ZRX1100II
*Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
-
ZRX1100
*Requires drilling of switch hole| * Requires side cap (for 18mm diameter)
-
W800
*Need to drill a switch hole
-
W400
*Switch hole drilling required|*The direction of the brake banjo needs to be changed. To change the direction, you need to remove the brake hose.
اظهار الكل
KAWASAKI
Others
Open Fit Model Information Table
-
Universal
وصف المنتج أدناه تترجم تلقائيا من قبل جوجل.
Product detail
لون المقود : أسود
[مواصفات المقود]
مقود الدراجة : الصلب ، أسود / الخارجي القطر Φ22.2mm / القطر الداخلي Φ18mm
من الممكن استخدام STD Cable و Hose.
[حجم المقود]
الارتفاع الكلي : 70MM
العرض الكلي : 680mm
حامل تركيب جزء العرض الفعال : 110MM
حجم الانسحاب : 100MM
زاوية داخلية : 23 درجة
زاوية الانقلاب : 100 درجة
*
* مقبض المشبك (حامل أو مشاركة) الموضحة في الصورة غير مضمنة في المنتج.
* الحجم المعروض هو الذي تم وضعه أفقيًا..
اضغط هنا لحامل المقود مونكي
تحقق هنا للألوان الأخرى
STD HandlebarSize قائمة 7/8 بوصة نموذج الطريق
7/8 بوصة سكوتر / الأمريكي STD HandlebarSize القائمة
1 بوصة الطراز الأمريكي STD HandlebarSize القائمة.
اليابان. النموذج ، تأكيد التثبيت ، الإنتاج الضخم ، تدار بإستمرار من قبل شركتنا الخاصة بنا. التكنولوجيا التي تزرع على مدى سنوات عديدة في شرق أوساكا الكبير ، اختيار دقيق للمواد من خلال الدراية ، عدة أنواع من التلميع ، ختم جزء العدد ، الثني واللحام عالي الدقة ، المقود عالية مع الكثير من الالتزام مثل جودة المعالجة السطحية ، وما إلى ذلك. يستخدم STKM 13 المواد ASteel مع قوة الشد ممتازة. قيمة JMCA سلامة القياسية [اللون] يتم إجراء معالجة منع الصدأ المزدوج بواسطة طلاء أكريليك من أعلى من طلاء Clear.Black بالكروم.
الحذر
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
آراء العملاء
Reviews with image
Fits:YAMAHA XJR1300 07-12 (RP17J) *Processing to open switch hole required|* Required side cap (for 18mm ID), YAMAHA XJR400R 01-07 RH02J *Processing to open switch hole required|*Side cap required (for 18mm diameter), YAMAHA XJR1300 00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID), YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required, YAMAHA SR400 88-00 (CV carburetor) *Processing to drill switch holes is required
Jan 30, 2022
Just as I imagined, with a lower Handle position!
Helpful?
Fits:YAMAHA XJR1300 07-12 (RP17J) *Processing to open switch hole required|* Required side cap (for 18mm ID), YAMAHA XJR400R 01-07 RH02J *Processing to open switch hole required|*Side cap required (for 18mm diameter), YAMAHA XJR1300 00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID), YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required, YAMAHA SR400 88-00 (CV carburetor) *Processing to drill switch holes is required
Apr 24, 2019
Low-eyed, narrow-eyed and Steel
Purchased along with the X11's Pipe Handlebar
I didn't want to change the Position, even though it is made into a bar handle, so I had to take a few steps exactly Choose a Handlebar that measures and reproduces as much of the NORMAL position as possible I did
Position is perfect
And the main reason why we chose this is because of Steel It's not only the strength of the material, but it's also the material itself, so you don't need to add any weight It can reduce microvibrations to some extent
Helpful?
Fits:YAMAHA XJR1300 07-12 (RP17J) *Processing to open switch hole required|* Required side cap (for 18mm ID), YAMAHA XJR400R 01-07 RH02J *Processing to open switch hole required|*Side cap required (for 18mm diameter), YAMAHA XJR1300 00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID), YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required, YAMAHA SR400 88-00 (CV carburetor) *Processing to drill switch holes is required
May 29, 2013
It attached to ninja400r.Since it is satisfactory as
goods although
drilling process which is inclining forward very much was a little troublesome if compared pure, it is the star 5.
Helpful?
Fits:YAMAHA XJR1300 07-12 (RP17J) *Processing to open switch hole required|* Required side cap (for 18mm ID), YAMAHA XJR400R 01-07 RH02J *Processing to open switch hole required|*Side cap required (for 18mm diameter), YAMAHA XJR1300 00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID), YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required, YAMAHA SR400 88-00 (CV carburetor) *Processing to drill switch holes is required
Dec 12, 2011
It had attached to ninja400r.
Since Ho's blog attached to ninja400r was in other sites, it referred to it.
Although he wanted to use a separate handle in fact, since it does not go with bolt-on and also expense also started, it worried.
But if it was the goods here, more than it ends at a low price and also considered, a position changes and it is large satisfaction.
In the case of attachment, although 5-mm drilling is required, it has fought desperately a little.
It can do simply that it is unexpected even to an amateur, and since it is a handy amount of money, it is quite recommended.
Helpful?
Fits:KAWASAKI 250TR -06 *Requires switch hole drilling|* Requires changing the orientation of the brake banjo and throttle holder., HONDA NC700S 12 (except for ABS and DCT cars) *Processing of switch hole is required|* Required side cap (for 18mm diameter), HONDA HORNET250 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter), KAWASAKI W400 *Switch hole drilling required|*The direction of the brake banjo needs to be changed. To change the direction, you need to remove the brake hose.
Installed on: HONDA SOLO
Jun 6, 2025
I really didn't like the factory-installed steering wheel on my friend's Honda Solo. I suggested that he replace the steering wheel and he agreed. The choice fell on this manufacturer as it has a large selection of handlebars with clear dimensions and many good reviews. The workmanship was pleasantly surprised. Everything went well in terms of size. The new steering wheel turned out to be much more comfortable than the factory one. The appearance of the motorcycle has become much more interesting. We are satisfied!!!
View Detail
Helpful?
New Custom Articles
