I really didn't like the factory-installed steering wheel on my friend's Honda Solo. I suggested that he replace the steering wheel and he agreed. The choice fell on this manufacturer as it has a large selection of handlebars with clear dimensions and many good reviews. The workmanship was pleasantly surprised. Everything went well in terms of size. The new steering wheel turned out to be much more comfortable than the factory one. The appearance of the motorcycle has become much more interesting. We are satisfied!!!
View Detail
- تخفيض السعر
- Instock
83.16 AED (3,360 JPY) 87.12 AED Save 5%
Webike Point: +34 pt
(0.84 AED)
معلومات التوصيل
In Stock : 2 left, Ships within 24 hours.
Estimated arrival date around
FITMENT
HONDA
-
CB400SF
99-07 NC39 VTEC II* requires drilling of switch hole|* requires side cap (for 18mm ID)
-
CB400SF
99-07 NC39 VTEC III* requires drilling of switch hole|* requires side cap (for 18mm ID)
-
CB400SF
08-21 NC42 VTEC Revo *Requires switch hole drilling|*Requires side cap (for inner diameter 18mm)
-
CB400SF
-98 NC31 *Processing of switch hole required|* Required side cap (for 18mm ID)
اظهار الكل
HONDA
YAMAHA
-
SR400
01-12 (Carb/FI Disc Brake Car) *Processing of switch hole is required
-
XJR1300
07-12 (RP17J) *Processing to open switch hole required|* Required side cap (for 18mm ID)
-
XJR1300
00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID)
-
TW225E
00- (Disc Brake Car) *Processing of switch hole is required
اظهار الكل
YAMAHA
SUZUKI
-
ST250
-07 NJ4AA Carburetor *switch hole drilling required|*Side caps can be used for stock.
-
RV200 VANVAN
-07 NH41A Carburetor *Processing to open switch holes required|* The stock side caps can be used.
-
GSR400
-12 *Ask to drill switch holes|* Normal side caps can be used.
-
GRASS TRACKER Big Boy
09-12 (FI car)*You can use stock side caps.
اظهار الكل
SUZUKI
KAWASAKI
-
BALIUS2
*Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
-
BALIUS
91-94 *Processing of switch hole required|* Required side cap (for 18mm diameter)
-
ZEPHYRX
*Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
-
ZEPHYR750 RS
*Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
اظهار الكل
KAWASAKI
Others
Open Fit Model Information Table
-
Universal
وصف المنتج أدناه تترجم تلقائيا من قبل جوجل.
Product detail
لون المقود : طلاء الكروم
[مواصفات المقود]
مقود الدراجة : الصلب ، أسود / الخارجي القطر Φ22.2mm / القطر الداخلي Φ18mm
من الممكن استخدام STD Cable و Hose.
[حجم المقود]
الارتفاع الكلي : 70MM
العرض الكلي : 680mm
حامل تركيب جزء العرض الفعال : 110MM
حجم الانسحاب : 100MM
زاوية داخلية : 23 درجة
زاوية الانقلاب : 100 درجة
*
* مقبض المشبك (حامل أو مشاركة) الموضحة في الصورة غير مضمنة في المنتج.
* الحجم المعروض هو الذي تم وضعه أفقيًا..
اضغط هنا لحامل المقود مونكي
تحقق هنا للألوان الأخرى
STD HandlebarSize قائمة 7/8 بوصة نموذج الطريق
7/8 بوصة سكوتر / الأمريكي STD HandlebarSize القائمة
1 بوصة الطراز الأمريكي STD HandlebarSize القائمة.
اليابان. النموذج ، تأكيد التثبيت ، الإنتاج الضخم ، تدار بإستمرار من قبل شركتنا الخاصة بنا. التكنولوجيا التي تزرع على مدى سنوات عديدة في شرق أوساكا الكبير ، اختيار دقيق للمواد من خلال الدراية ، عدة أنواع من التلميع ، ختم جزء العدد ، الثني واللحام عالي الدقة ، المقود عالية مع الكثير من الالتزام مثل جودة المعالجة السطحية ، وما إلى ذلك. يستخدم STKM 13 المواد ASteel مع قوة الشد ممتازة. قيمة JMCA سلامة القياسية [اللون] واضح. طلاء سميك ، ومتانة ممتازة ومقاومة للتآكل TripleNickel؟ طلاء الكروم (طبقة Nickel 3 + Chrome) إنهاء.
الحذر
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
آراء العملاء
Reviews with image
Fits:KAWASAKI 250TR -06 *Requires switch hole drilling|* Requires changing the orientation of the brake banjo and throttle holder., HONDA NC700S 12 (except for ABS and DCT cars) *Processing of switch hole is required|* Required side cap (for 18mm diameter), HONDA HORNET250 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter), KAWASAKI W400 *Switch hole drilling required|*The direction of the brake banjo needs to be changed. To change the direction, you need to remove the brake hose.
Installed on: HONDA SOLO
Fits:KAWASAKI 250TR -06 *Requires switch hole drilling|* Requires changing the orientation of the brake banjo and throttle holder., HONDA NC700S 12 (except for ABS and DCT cars) *Processing of switch hole is required|* Required side cap (for 18mm diameter), HONDA HORNET250 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter), KAWASAKI W400 *Switch hole drilling required|*The direction of the brake banjo needs to be changed. To change the direction, you need to remove the brake hose.
May 29, 2020
To replace the SR500 OEMLow Handlebar
I bought it to put a Bar end mirror on my SR500
The OEMHandlebar can't be fitted with a bar end because the end is welded shut
I chose this product to make the Handlebar as close to the OEM shape as possible
It is not the Up type of Initial Model, but Low type
It's 10mm longer in width than the OEM, but it's not uncomfortable
The height, pull and droop are the same positional feel as the OEM Low Handlebar
If it is not to attach Bar End, there is no need to replace it
Cables are fine as they are NORMAL
My impressions of its use are still about 200km, but I don't have any problems with it
The motorcycle has always had a lot of vibrations, but switching to a different motorcycle may have made the vibrations even stronger
It's not like my hands are getting tired easily
I'm not saying that the change has made anything better, or that it has made anything better
It's the same as it was with the OEMs
As for the quality, it looks good at the moment
I don't know the long term durability of Rust's stickiness etc
This is a recommendation for those who want to maintain the OEM look and add a Bar End
Helpful?
Fits:YAMAHA XJR1300 07-12 (RP17J) *Processing to open switch hole required|* Required side cap (for 18mm ID), YAMAHA XJR400R 01-07 RH02J *Processing to open switch hole required|*Side cap required (for 18mm diameter), YAMAHA XJR1300 00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID), YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required, YAMAHA SR400 88-00 (CV carburetor) *Processing to drill switch holes is required
Jan 30, 2022
Just as I imagined, with a lower Handle position!
I put it on my st250, but the OEM handlebar made me look awkward when riding.
The quality is not luxurious, but it feels solid!
Helpful?
Fits:YAMAHA XJR1300 07-12 (RP17J) *Processing to open switch hole required|* Required side cap (for 18mm ID), YAMAHA XJR400R 01-07 RH02J *Processing to open switch hole required|*Side cap required (for 18mm diameter), YAMAHA XJR1300 00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID), YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required, YAMAHA SR400 88-00 (CV carburetor) *Processing to drill switch holes is required
Apr 24, 2019
Low-eyed, narrow-eyed and Steel
Purchased along with the X11's Pipe Handlebar
I didn't want to change the Position, even though it is made into a bar handle, so I had to take a few steps exactly Choose a Handlebar that measures and reproduces as much of the NORMAL position as possible I did
Position is perfect
And the main reason why we chose this is because of Steel It's not only the strength of the material, but it's also the material itself, so you don't need to add any weight It can reduce microvibrations to some extent
Helpful?
Fits:YAMAHA XJR1300 07-12 (RP17J) *Processing to open switch hole required|* Required side cap (for 18mm ID), YAMAHA XJR400R 01-07 RH02J *Processing to open switch hole required|*Side cap required (for 18mm diameter), YAMAHA XJR1300 00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID), YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required, YAMAHA SR400 88-00 (CV carburetor) *Processing to drill switch holes is required
May 29, 2013
It attached to ninja400r.Since it is satisfactory as
goods although
drilling process which is inclining forward very much was a little troublesome if compared pure, it is the star 5.
Helpful?
New Custom Articles
