파킹브레이크가 언덕길 내리막길 정차시 아주 유용합니다 자동으로 걸리진 않지만 해제가 아주 간단하여 사용하기 아주 편리합니다 양손을 두고 신호대기하기에 아주 좋습니다 설치하기도 아주 수월합니다 설치가능한 차종이라면 무조건 추천합니다
View Detail
- الجديد
- Instock
95.29 AED (3,850 JPY)
Webike Point: +39 pt
(0.96 AED)
معلومات التوصيل
In Stock, Ships within 24 hours.
Estimated arrival date around
FITMENT
HONDA
-
ADV150
(KF38)
-
ADV160
(KF54)
-
PCX
(JF28)(JF56)(JF81)(JK05)
-
PCX HYBRID
(JF84)
اظهار الكل
HONDA
YAMAHA
-
PG-1
23
-
XTZ125
(LYOJ)
SUZUKI
-
GN125-2F
KAWASAKI
Open Fit Model Information Table
-
D-TRACKER125
(LX125D-A00001-)
-
KSR110
(KL110A-000001-)
-
Z125PRO
(BR125H)
-
KSR110PRO
(KL110EEF)(JKAKL110EEDA88121-)
وصف المنتج أدناه تترجم تلقائيا من قبل جوجل.
Product detail
Parking brake that can be attached to the front brake master cylinder to hold the brake lever in place
■Convenient item to secure the brake lever in the braking position!!!
■By squeezing the brake lever again, the stopper can be easily released
■Also useful for securing a motorcycle when it is loaded onto another vehicle.
■Prevents the bike from moving when parked on rough or uneven terrain
■Machined aluminum with anodized finish for dress-up effect
■Simply remove the stock lever pivot bolt and install this product!!
■Two different lengths of collars, bolts, etc. are included for universal use
Universal / Models confirmed compatible by SP Takegawa
Universal
For front brake master cylinder
(Brake lever pivot length: Mounting width 17mm/22.5mm compatible)
SP Takegawa Front Brake Master Cylinder
(06-08-1169) Compatible
Models confirmed compatible by SP Takegawa
ADV160(KF54)
ADV150(KF38)
PCX HYBRID(JF84)
PCX(JF28)(JF56)(JF81)(JK05)
PCX150(KF12)(KF18)(KF30)
PCX160(KF47)
GROM(JC61)(JC75)(JC92)
Dax125 (JB04) (JB06)
MSX/MSX125SF/MSX GROM(MLHJC92)
Monkey 125 (JB02) (JB03) (JB05) including Thailand models
DREAM50(AC15)
Magna 50 (AC13)
Rebel 250 (MC49)
CL250(MC57)
CL500(PC68)
CT125(JA55)(JA65)
Super Cub C125 (JA48) (JA58) (JA71)
Super Cub 110 (JA59)
Super Cub 110PRO (JA61)
Cross Cub 110 (JA60)
GB350/GB350S(NC59)
GB350C(NC64)
KSR110(KL110A-000001-)
KSR110PRO(KL110EEF)(JKAKL110EEDA88121-)
Z125PRO(BR125H)
D-TRACKER125(LX125D-A00001-)
PG-1 ('23 model)
XTZ125(LYOJ)
GN125-2F
*■Cautions
This product is an auxiliary part for parking.It does not absolutely secure the bike when parking on rough roads or slopes.
Always be sure to use the parking brake after checking that the engine has been stopped.
This product is for specific type of brake master cylinders.Check the specified dimensions of the brake lever mounting area indicated in the diagram.
It can be installed on various bikes as long as it is within the specified dimensions.
Additionally, there are instances where this product may not be installable on bikes with a cowl around the handlebar area, as the parking brake unit may interfere with the cowl.Please check the vehicle before purchasing.
The stock nut is to be reused.If the stock nut is damaged, please purchase a new one.
This product cannot be installed at the same time as SP Takegawa's billet aluminum levers.
*The image may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.
.
■Details
By attaching this product to the front brake master cylinder, the lever can be fixed in the braking state.
This allows the parking position to be fixed so that the bike does not move back and forth when parked.
This product may also be used to prevent slippage when the motorcycle is being secured by tie-downs in a transporter.
This parking brake is a quick-release type where the stopper automatically returns by squeezing the brake lever again.
The main body is elaborately machined from aluminum and anodized on the surface.The texture of machined aluminum beautifully accentuates the handle area.
The two-tone silver and black color can be installed regardless of the bike's color.
Laser marked with SP Takegawa logo.
■Installation method
Remove the stock lever pivot bolt and nut that secure the front brake master cylinder and brake lever. Then, place the included washer and the parking brake unit on top of the front brake master cylinder. Use the included socket cap bolt and the stock nut to secure everything together with the brake lever.
This product is supplied with two different dimensioned non-turn pins, collars, and bolts to enhance the universality of the targeted front brake master cylinders.
■Short collar bolt: For brake lever pivot length: 17mm
■Long collar bolt: For brake lever pivot length: 22.5mm
■How to check compatibility using the removed lever pivot bolt (Including stock)
Measure the shaft length (from the underside of the bolt head to the start of the threaded section) and the shaft diameter (see diagram) of the lever pivot bolt removed when detaching the brake lever from the front brake master cylinder.
If the shaft length is 17mm or 22.5mm and the diameter of the shaft is Φ7.9mm, this product can be installed.
The shaft length is from the underside of the bolt head to the threaded part.
Not the outside dimensions (top to bottom).
Please check the dimensions by referring the images.
■SP TAKEGAWA confirmed models
SP Takegawa confirmed models are stock models that have been confirmed to be compatible by SP Takegawa mechanics.
Also, it has been confirmed that it can be installed together with SP Takegawa's knuckle guards (limited to the certain vehicles).
الحذر
* If there may be an instruction manual included, it will be written in Japanese.
MODEL PAGE LINKS
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
آراء العملاء
Reviews with image
Fits:HONDA ADV160 (KF54), HONDA ADV150 (KF38), HONDA PCX HYBRID (JF84), HONDA PCX (JF28)(JF56)(JF81)(JK05), HONDA PCX150 (KF12)(KF18)(KF30)
Installed on: HONDA GB350C
New Custom Articles
