I am using this on my moped bike - Honda RS150R v2 (known as Winner in Vietnam for your reference). I want to install a dashcam and a USB-C charger on board and i want a reliable power source without tapping directly into the battery. The daytona WR 3 is very good, each line is fused at 5A, and a pair of 7.5A. It is waterproof as well but i installed it behind my headlight so there's minimum risk of water exposure.
View Detail- قطع غيار الدراجات النارية
- الكهرباء
- تسخير / مقرنة استخراج الطاقة
- DAYTONA
- DAYTONA - تسخير / مقرنة استخراج الطاقة
- قائمة المنتجات
- وحدة تزويد الطاقة التبعي D-UNIT WR (D وحدة مقاومة للماء)

























This picture was provided by our customers, which maybe similar but different product.
- Instock
・هذا الخيار غير متوفر.
・يرجى تحديد خيارات أخرى.
55.4 AED (2,241 JPY) 64.27 AED Save 14%
معلومات التوصيل
In Stock, Ships within 24 hours.
Estimated arrival date around
Product detail
[الحجم (طول الحزام)]
• تسخير الإدخال / حوالي 1300 مم
• تسخير الإخراج / حوالي 250 مم
[تخصيص]
• تصميم مقاوم للماء
• تشغيل / إيقاف تشغيل مفتاح التشابك الرئيسي
• يتم تثبيت ما يصل إلى 3 ملحقات بشكل فردي
• محطة رصاصة (CA / CB103) 3 منافذ
• الرحلة الحالية : 7.5A × 2 خطوط (الحالية الموصى بها : 4A *) ، نظام 5A × 1 (التيار الموصى به : 2A *) * بسبب استخدام الثرمستور PTC
• تصميم عالي الإنتاجية 20 أمبير
[تكوين المنتج]
• وحدة الجسم x1pc.
•شريط مزدوج x1pc.
• موصل الأسلاك x1pc.
• ربط الحزمة x2pcs.
• ربط الحزمة (نوع الإصدار) x2pcs.
** قم بتخزين جزء توصيل المحطة في مكان لن يتعرض فيه للماء.
* الثرمستور PTC يدير التيار المتدفق بالحرارة والمقاومة. عندما يتجاوز التيار التدفقات الحالية المحددة ، تصبح قيمة المقاومة عالية. (تصبح ساخنة) سيتم حظره. إذا تُرك الجهاز الإلكتروني متصلاً في هذه الحالة ، فلن تنخفض درجة الحرارة وقد تذوب الوحدة الرئيسية. إذا توقف الجهاز المتصل عن العمل ، فقم بإزالته على الفور.
* نظرًا لأن الوحدة نفسها تولد الحرارة ، فإننا لا نوصي بتركيبها في مكان يسهل تراكم الحرارة فيه ، مثل أسفل المقعد.
* للتوصيل بكل جهاز كهربائي ، يرجى توصيل الأسلاك بشكل منفصل.
* قد تتغير مواصفات المنتج لأسباب تتعلق بالشركة المصنعة. يرجى الملاحظة..
[Size (harness length)]
・Input harness / approx. 1300mm
・Output harness / approx. 250mm
[Specification]
・Waterproof design
・Power ON/OFF by main key interlocking
・Attach up to three accessories individually
・Bullet terminal (CA/CB103) 3 ports
・Trip current: 7.5A x 2 systems (recommended current: 4A*), 5A x 1 system (Recommended current: 2A*) *due to use of PTC thermistor
・High power design of 20A
[Product Configuration]
・Main unit x 1
・Double-sided tape x 1
・Wiring connector x 1
・Binding bands x 2
・Cable ties (release type) x 2
**Keep the terminal connections away from water.
*PTC thermistors manage the current flowing through them by heat and resistance values.When the current exceeds the specified current, the resistance value becomes high (high temperature) and it will shut down.If an electronic device is left connected in this state, the temperature will not drop and there is a possibility that the body will melt.If the connected equipment stops working, disconnect it as soon as possible.
*Because the unit itself generates heat, it is not recommended to install the unit under the seat or in other places where heat is likely to accumulate.
*Please do the wiring processing separately for the connection to each electric equipment.
*There may be changes in product specifications due to the manufacturer's reasons..
إدارة الطاقة الضخمة.
أخرج العديد من إمدادات الطاقة تان 12V.
مزود طاقة مرفق مقاوم للمطر ومضغوط.
3 أسطر من المرفقات (ACC) وحدة تزويد طاقة مدمجة يمكنها إخراج مصدر الطاقة.
يمكن ربط المفتاح الرئيسي لتشغيل الطاقة وإيقافها ، ويسمح التصميم المقاوم للماء بتثبيتها في أي مكان.
يتم تثبيت أكبر 3 مرفقات بشكل فردي.
موثوق بها تصميم إخراج عالية.
من خلال أخذ مصدر الطاقة الرئيسي مباشرة من البطارية ، يمكن الحصول على إنتاج عالي مع تقليل الحمل على المعدات الكهربائية OEM.
يمكن تثبيته في أي مكان.
نظرًا لأنه تصميم مقاوم للماء ، يمكن تثبيته في الأماكن المعرضة للأمطار.
الحذر
* If there may be an instruction manual included, it will be written in Japanese.
Delivery Information
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
آراء العملاء

Installed on: SUZUKI BURGMAN 400
Excellent
Jun 9, 2023
It is quite small than i expected and that makes easier to find the location for install power supply.I connected heated grip there and work quite well.Highly recommend product.
View DetailAverage
May 4, 2022
I purchased this for charging my phone and for navigation power. I chose this one because the power supply around the handlebar is messy, and I installed it under the Seat, even though the body is supposed to be waterproof. It works fine. I recommend it because it is inexpensive.
View DetailVery Good
Mar 28, 2022
For future electrical equipment.
I installed it while servicing my ZOOMER. I had previously installed D-UNIT, a different version of this product, on my ZX-10R, but was attracted by the waterproof specification and compactness of this product, so I installed it on my ZOOMER as well.
I installed it in the position shown in the picture, and the ACC power is supplied from BlinkerWiring. The work itself is not difficult, but if you do not have basic knowledge of electrical systems, it would be safer to ask a shop to do it for you. After installation, check the power with an energizing tester. We are planning to install Fog light etc. in the future.
Excellent
Mar 17, 2022
After installing the driver's license camera, I will also install ETC in the future and may buy electric heating wire next season, so I installed it to facilitate wiring.
I was torn between other products in the Series, but I didn't need a constant power supply and I was worried about the shape of the product.
Select this one, which is the simplest, smallest, waterproof, and lowest price.
Since it was after installing the driver's camera, I redid the wiring from the middle of the process and installed it and Refreshing it.
If multiple power distribution is required, it is good because once it is attached, the rest is easy.