Good quality handlebars.The orig.bar ends/vibration dampeners dont fit anymore.this should have been mentioned in theDescription !
View Detail
296.22 AED (11,968 JPY)
Webike Point: +120 pt
(2.97 AED)
معلومات التوصيل
This item is discontinued.
وصف المنتج أدناه تترجم تلقائيا من قبل جوجل.
Product detail
[اللون] أسود
[مواد] الألومنيوم
[بحجم]
・ عرض المقود: 736.5 ملم (OEM 756 مم)
・ عرض المركز: 120 مم (OEM نفس الخ)
・ حجم الرسم: 36.4 ملم (OEM104.3 مم)
・ الارتفاع الكلي: 39.4 مم (OEM73.3 مم)
・ زاوية الفتحة: 28.4 درجة (درجات OEM25)
・ القطر الداخلي للمقود: .514.5
[المواصفات]
・ تجهيز ثقب تبديل مربع تركيب
・ مع PunchMark لتحديد المواقع
・ ACTIVE Bar End ، يمكن استخدام الوزن الداخلي معًا (لا يمكن تثبيت نهاية شريط OEM)
** لا يمكن تثبيت نهاية شريط حقيقي.
* يرجى ملاحظة أن مواصفات المنتج قد تتغير بسبب أسباب الشركة المصنعة..
* الصورة هي للاشارة فقط. الصورة المعروضة يمكن ان تختلف عن المنتج الفعلي.
سهل الاستخدام بتكلفة منخفضة ، لقد أدركنا وضع إمالة منخفض مثل KATANA مع مقود الأنابيب.
NORMAL لا يوجد أي تداخل مع السطح الخارجي ، ويمكن تثبيت سلك OEM وخرطوم مثل Bolt On بدون تغيير.
من خلال وضع زاوية للتنقيط فوق Grip ، يؤدي ذلك إلى وضع مناسب للقيادة الرياضية.
الحذر
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
آراء العملاء
Reviews with image
Fits:SUZUKI KATANA 19-21
Installed on: SUZUKI KATANA
Fits:SUZUKI KATANA 19-21
Installed on: SUZUKI KATANA
Aug 25, 2022
Thank you for the quick delivery. The product was delivered well without any damage. It's still pre-installed, but I'm satisfied with the quality.
View Detail
Helpful?
Fits:SUZUKI KATANA 19-21
Jul 3, 2022
I wasn't sure what to do with the STD Handlebar because it was getting up too much and also felt a little far away. So I decided to try this Handlebar and bought it.
Installation is quite easy! Simply remove them in the correct order.
However, when using a Phillips screwdriver to secure switches after installing the handlebar, a shorter screwdriver is required than when removing the handlebar (because the position of the handlebar is lowered and space between the handlebar and the tank cannot be taken).
Now, the Position is surprisingly not tight, and the forward lean is not too tight.
To make it to your liking, the position can be changed more than you think by moving it up or down just a little from the positioning mark.
I didn't dislike the OEM's position, but the change made the overall style of the image from the side view reflective.
By the way, I am 176 cm tall and weigh 67 kg, and I set the Rear suspension to the weakest, and I also adjust the Front fork Initial to slightly weaker.
Helpful?
Fits:SUZUKI KATANA 19-21
Fits:SUZUKI KATANA 19-21
Aug 4, 2021
Personally, I like the look and the improved Position.
But the vibration has increased.
I use the company's Bar End and Inner Weight together, but it's a little hard because my hands are numb.
It feels better than NORMAL, and I want to use this Handlebar, so I want to think about vibration countermeasures.
Helpful?
New Custom Articles
I.
Hi, which bar ends fit this handlebar?
1 year ago