As making was made abroad it was coarse as expected and there was a part cracked because FRP is thin. Price suitable. But I like Design because it is good.
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
As making was made abroad it was coarse as expected and there was a part cracked because FRP is thin. Price suitable. But I like Design because it is good.
Fits: HONDA MSX125 13-19, HONDA MSX125 13-19, HONDA Monkey125 18-21, HONDA Grom. 13-19, HONDA Grom. 13-19
About quality and texture - The front fender from Tyga Performance is made from 100% carbon fibre with a clear gloss coating and the quality from the overall fit and finish is perfect.About the feeling of use - This front fender is my favourite designed one of the lot. purely a cosmetic addition but for me does wonders improving the looks over the factory designed and finished front fender.Products to buy together - The Honda Grom is an inexpensive motorcycle with a lot of low quality parts from the factory, so the purchasing of other high quality parts like this front fender from Tyga Performance would be perfect. More carbon fibre to replace other factory matte black plastic parts and billet aluminium to replace factory cast aluminium or pressed steel parts is what I would recommend.Difficulty of installation - The installation of the front fender is a simple task that took 0.5 hour to complete. Some slight mechanical aptitude and the use of basic hand tools is what is required to mount the front fender to the lower fork arms.Cost performance and comparison with other products - I find the cost of all the products Tyga Performance sell to be higher then what most other companies sell their products for and the front fender is no different, but this is due to the high quality materials used and the consistent high quality finish of their products.About shipping and packaging - With there being a significant cost difference between sea freight and EMS for the instrument surround, I chose sea freight so I use the saved money to purchase additional carbon fibre parts. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - For my location purchasing Tyga Performance products from Webike Japan is the best option when taking into account the shipping cost but depending on where you live you may be better off purchasing from Webike Thailand due to the much low product pricing.View Detail
Fits: HONDA MSX125 13-19, HONDA MSX125 13-19, HONDA Monkey125 18-21, HONDA Grom. 13-19, HONDA Grom. 13-19
About quality and texture, I can confirm the quality great and the material used is carbon fiber that is vacuum bagged and finished with a clear gloss coating.About the feeling of use, The design of the Tyga Performance hugger style front fender is much different then the original Honda fender and sure is an impressive addition to the Grom.Products to buy together, By installing the carbon fiber front fender the addition of more carbon fiber parts like the rear hugger from Tyga Performance would be ideal to also add to your cart.Difficulty of installation, I can say the fitment of the front fender for my installation was easy due to the ease of access to all the mounting bolts and simple nature of securing.Cost performance and comparison with other products, The pricing of this product is good, you receive parts made from high quality materials and with a higher quality finish then most others offer. There are cheaper and higher priced options but I find the Tyga Performance products the best compromise.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail
Fits: DUCATI 848 , DUCATI 1198 , DUCATI 1098
The installation position is correct, the goods are well packaged, but the freight is too expensive、Shipping costs 8,000 yen, which is more than half the product price。View Detail
Replaced my OEM fender bracket fits perfectly to the Carbon fiber front fender comes with high gloss polish. I would recommend.View Detail
[How is it used?
We wanted to color-match with other parts in Custom, so we went to the trouble of creating Material:I purchased Carbon.
Was the one you received as per Image?
I received the same etc. as in the picture well.
Was the installation difficult?
The product itself can be installed by bolting on without any modification since it is a vehicle-specific product.
However, the installation procedure is a bit troublesome, and the front wheel needs to be removed once.
It is very cumbersome to have to Front up for that.
In order of installation
Remove the front caliper and loosen the screws of the WiringSupport.
Loosen the FrontShaft.
・Front up。
Wheel removal (Speed sensor at the same time).
Sitting upright and placing the Tire on your feet will help stabilize it.
Note the falling of the collar between the Front fork.
Existing Fender removal
Fender itself is installed with 4 Screws at the top + TrussScrewQuantity on the SIDE:2pc. Set+Quantity:Pair (for Left and Right) WiringSupport will be the WiringSupport of the
The rest is installation and restoration in the reverse order of the above.
How was your experience with it?
The appearance is Main, so there is no sense of use.
[Included Parts:were they on?
There is an attached Bolt and Nut for installation.
[Was there anything that disappointed you?
None
Comments outside of OthersTemplate
Installation is a bit of a hassle, but the quality for the price and how cool it looks after installation is more than worth it!
It will take some time to arrive due to shipping from overseas. (I believe it took about a month.)
I installed a 2013 R125, so the 2014 and later Inverted Front Fork types may not be able to get it.View Detail
Purchased for regular replacement.
If it were a little cheaper, I could get a stable replacement...View Detail
?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
I purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Grip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING