The installed Machine is VTR250FIMODEL.
This Skid Pad was extremely effective the other day when I tried too hard on Circuit's HairpinCorner and fell over (of course, it would be better if I didn't fall over ^^;)!
The Skid Pad kept the machine from sliding down to the label and prevented the rear end of the machine from getting caught up, and also kept the machine's damage to a minimum. The damage is shown in the photos and details below.
Bar End Sharpen.
Clutch lever slightly bent and shaved upward (works fine except for a little discomfort)
Change Pedal tip shaved and bent (I bent it back by hooking it with a Glasses Wrench, and it worked fine.)
Footpeg is Foldable, so almost no problem. No need to replace.
The tip of the Swingarm Stand Hook for VTR250 made by Babyface was shaved off. There is no damage that needs to be replaced.
I can say that the Skid Pad is the gold standard for the VTR250's original robustness. Of course, it will definitely perform well on public roads as well (of course, it would be better if it didn't).
*Repair Parts was available at Webig and I only needed to replace the tip. The shipping was faster than I expected. Thank you!
MAFUMA does not become a crack to Ngari Gary, either, but a 1-cm degree can be deleted, and it is a crack.
The repair charge ended at a low price.
Th
The tank was not dented, although it attached to VTR250 and right and left were reversed once.
MAFUMA does not become a crack to Ngari Gary, either, but a 1-cm degree can be deleted, and it is a crack.
The repair charge ended at a low price.
They are painful expenses if it is without a skid pad with a cowl.
Cowl exchange is not carried out and the present state is shameful.
If it compares with big expenses even if it is presumed that it is running by the fall premise just for a moment.View Detail
after buying it, when a thing is seen, it is still high too by the impression of being made very well heavily heavily -- I thought --.
However, although it is such a skid pad, i
why quantity is not like this -- it considered before ?? and purchase.
after buying it, when a thing is seen, it is still high too by the impression of being made very well heavily heavily -- I thought --.
However, although it is such a skid pad, it has passed to the role on the attached next day.
Although it stood and was GOKE, it was the touch which the end of a brake lever calls a wound, a muffler calls a wound, and a little skid pads [ some of ] call a wound.
Probably, the wound was certainly contained in the tank, if there was no skid pad.
The deep socket wrench was required for attachment.View Detail
The volume is and is pleasing than expected!! It is GOOD! by the insurance + dress-up effect up.
it stands and is the happiness now which is the insurance of GOKE (smile) -- the effect is not realized.
The volume is and is pleasing than expected!! It is GOOD! by the insurance + dress-up effect up.View Detail
A 17-mm socket wrench and a torque wrench are required for attachment.
The front engine mount bolt of the main part of a motorcycle is removed one side at a time, and
It equipped for the motorcycle car-body damage mitigation at the time of a fall.
A 17-mm socket wrench and a torque wrench are required for attachment.
The front engine mount bolt of the main part of a motorcycle is removed one side at a time, and it equips with a skid pad.
Working hours were ended in about 10 minutes.View Detail
Evaluation of appearance is good although the effect at the time of a fall is not known.
Although it is a model of the black frame in '07, it is the touch
It purchased in order to make damage to the car body at the time of a fall into the minimum.
Evaluation of appearance is good although the effect at the time of a fall is not known.
Although it is a model of the black frame in '07, it is the touch which may also become a good accent.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING