39.07 AED
(1,610 JPY)
4 (10 كل التعليقات)
Very Good
Mounted face down.[How is it used?
I use it on my Z900.
We replaced it because the other company's product we had been using was outside of the Screen, which made us uneasy while driving, and it interfered with the Screen when we fixed the phone.
Was the one you received as per Image?
It was just as shown in the Image. I thought it didn't look too cheap.
Was the installation difficult?
The installation itself is easy, but in my case, when I installed it as usual, it still interfered with the Screen itself, so I installed it upside down.
As a result, this was the right choice, and the mounted phone is now easier to see and Smooth to wear.
How was your experience with it?
It has only been running for a short time after installation, but it looks quite good with no blurring.
I will use the same product in the future in case of deterioration or accidental damage.
Attached to the bar itself is a SP Conecto Smartphone Mount and a USB×2.
If you pack it up, you could probably fit at least a WearLOVE LeCamera.
Reviews For Unit GPS / حامل الهاتف الذكي المتصاعد From Other Webike User
Very Good
Nice mountThis Unit GPS/Smartphone Holder Mounting is very useful if your motorcycle do not have a regular handle bar. It can combines together with the mirror.View Detail
Excellent
I put it on 3 Motorcycles and used it for about 3000 km.C90CM In use for CD125Ts
There may be some interference with the Visoretc. for installation, so it may be necessary to bend or change the angle.
I have used it for about 20000 km and it is sturdy and does not bend or crack when I attach my phone and USB port.
If I had to replace it, I might not change it unless it gets too rusty or I get bored.
It is just right for general smartphone mounters to be installed.
I am using a different type for my CB125Tw and this one is also in use for about 10000km with no problems.View Detail
Excellent
Installed on CB1000R (SC80) 2021I bought this to attach my Smartphone Holder.
With Mirror mount, it is a little more noticeable.
I added Screen after this picture, so it's not so obvious.
No visible vibrations, etc., are generated.
The installation is done with Mirror, but there is no problem if you tighten it while holding down the Mount.View Detail
Very Good
For Smartphone Mount.When I mounted the phone on the Ninja250R, it was difficult to see downward, so I put it on the Mirror. So I put this on Mirror.View Detail
Excellent
For mounting the phone.I bought this product to install a Smartphone Holder. I chose this product because it is compact and low price.
The installation itself was co-tightened to the Mirror, but there is no problem.
View Detail
Most Viewed Reviews Of Unit Multi-Bar Mounting Bar
Very Good
Nice mountThis Unit GPS/Smartphone Holder Mounting is very useful if your motorcycle do not have a regular handle bar. It can combines together with the mirror.View Detail
Excellent
I put it on 3 Motorcycles and used it for about 3000 km.C90CM In use for CD125Ts
There may be some interference with the Visoretc. for installation, so it may be necessary to bend or change the angle.
I have used it for about 20000 km and it is sturdy and does not bend or crack when I attach my phone and USB port.
If I had to replace it, I might not change it unless it gets too rusty or I get bored.
It is just right for general smartphone mounters to be installed.
I am using a different type for my CB125Tw and this one is also in use for about 10000km with no problems.View Detail
Excellent
Installed on CB1000R (SC80) 2021I bought this to attach my Smartphone Holder.
With Mirror mount, it is a little more noticeable.
I added Screen after this picture, so it's not so obvious.
No visible vibrations, etc., are generated.
The installation is done with Mirror, but there is no problem if you tighten it while holding down the Mount.View Detail
Very Good
For Smartphone Mount.When I mounted the phone on the Ninja250R, it was difficult to see downward, so I put it on the Mirror. So I put this on Mirror.View Detail
Excellent
For mounting the phone.I bought this product to install a Smartphone Holder. I chose this product because it is compact and low price.
The installation itself was co-tightened to the Mirror, but there is no problem.
View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING