انها تتوافق مع قطر ميناء المدخول Φ22-.
خرج
with Main Jet # 135 Pilot Jet # 17.5
[محتويات المنتج]
MIKUNI Flat Φ20-432 Carburetor Assembly س 1pc.
مجموعة المنوع س 1pc.
الجسم المنوع س 1pc.
كاب بولت 6 × 20 x 2 جهاز كمبيوتر شخصى.
كاب بولت 8 × 15 x 2 جهاز كمبيوتر شخصى.
التعبئة المنوع س 1pc.
الفرقة الفولاذ المقاوم للصدأ (Φ25؟ 40) س 1pc.
حامل المطاط (ميكوني F24) س 1pc.
مجموعة حامل خنق عالية س
ملحوظة : من الضروري إعداد أنواع الطائرات وفقًا لمواصفات المحرك وبيئات الركوب. يرجى التأكد من استخدام منتجات OEM لإعدادها لأن مجموعة KITACO Big Carburetor قد تبنت جميع الأجزاء المصنعة لمصنع المكربن OEM. قد يتسبب ذلك في حدوث مشكلة ولن يخرج الإعداد الصحيح إذا كان يستخدم غير OEM.
* هذا الجزء هو handle22.2 مواصفات المقود. من المستحيل تثبيت المقود STD. يتطلب الأمر Φ22.2 المقود ، ورافعة R ومقبض الحامل ، ومجموعة شوكة أمامية للتركيب.
* من المستحيل استخدام منظف الهواء STD.
○Intake port diameter Φ22 compatible
○Left-handed (baseball pitcher)
○ Main Jet #135 Pilot Jet #17.5 pre-installed
[Kit Contents]
Mikuni flat Φ20-432 carburetor assembly x 1
Manifold Set x 1
Manifold Body x 1
Cap Bolt 6 x 20 x 2
Cap Bolt 8 x 15 x 2
Manifold Packing x 1
Stainless Steel Band (Φ25-40) x 1
Rubber Holder (Mikuni F24) x 1
High Throttle Holder Set x
Note: It is necessary to set up the jets according to the specification of the engine and the driving environment.The Kitaco Big Carburetor Kit uses the stock kit from the carburetor manufacturer, so please be sure to use the stock kit for setting.If you use other than the stock one, the correct setting will not be obtained and it may cause trouble.
*This part is for Φ22.2 handle.Stock handlebars cannot be installed.Φ22.2 handlebar, R lever and holder set, front fork kit, etc. are required for installation.
*Stock air cleaner cannot be used.