قطر التجويف: 54 مم
السكتة الدماغية: 63.1 ملم (عادي)
نسبة الضغط: 11.2: 1
* يتطلب التركيب مع وحدة تحكم FI من النوع e عند تركيب مجموعة التجويف الكبير S stage.
* من المستحيل استخدام على الطريق العام العام مع تسجيل نوع 2 الأصلي لأن محرك الإزاحة هو 125cc أو أكثر. هو للمنافسة.
* بخصوص تركيب عدة التجويف
يتعرض العمود المرفقي إلى زيادة الالتواء والانحراف بسبب الزيادة الكبيرة في قوة المحرك وعزم الدوران الناجم عن مجموعة SP Mukawa المحملة.
يوصي SP Mukawa بتركيب محول دعم العمود المرفقي في نفس الوقت لتقليل الحمل على العمود المرفقي.
يضيف محول دعم العمود المرفقي دعماً من المحامل الكروية إلى نهاية جانب عجلة الحدادة لعمود المرفق ، مما يؤدي إلى كبح التواء وانحراف الخ. ، وزيادة متانة العمود المرفقي.
محول دعم العمود المرفقي لـ GROM (JC92) (جزء لا. 01-10-0149)
* عند تثبيت S-stage Bore Up Kit ، وعمود الكامات الرياضي ، و FI-CON TIPE-e ، من الضروري تثبيت "الحاقنات عالية السعة (G1) (جزء لا. 00-00-0487) "في نفس الوقت.
* يرجى ملاحظة أن مواصفات المنتج قد تتغير بسبب أسباب الشركة المصنعة.
* اعتمادًا على الكمية ، قد يتم تسليم المنتج بالسعر القديم والملصق برمز JAN القديم قبل تغيير السعر. يرجى أن تكون محذر.
Bore Diameter: 54mm
Stroke: 63.1mm (stock)
Compression ratio: 11.2: 1
*When S-stage Big Bore Kit is installed, FI-CON TYPE-e (Injection Controller) must be installed at the same time.
For competition use only.
*Related to the installation of a big bore kit
The crankshaft is subjected to increased torsion and deflection due to the significant increase in engine power and torque caused by the SP Takegawa big bore kit.
SP TAKEGAWA recommends to install crankshaft support adapter at the same time to reduce the load on the crankshaft.
The Crankshaft Support Adaptor adds ball bearing support to the end of the flywheel side of the crankshaft to reduce twisting and deflection and to increase the durability of the crankshaft.
Crankshaft Support Adapter for GROM (JC92) (Part No: 01-10-0149)
*When installing the S-stage Big Bore Kit, Sports Camshaft, or FI-CON TIPE-e, be sure to use the "High Capacity Injectors (G1) (Part No.: 00-00-00-0487) " must be installed at the same time.
*There may be changes in product specifications due to the manufacturer's reasons.
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change.