يتم وضع وحجم وظائف مختلفة لتناسب كل طراز سيارة.
جميع الوظائف خاصة بالطراز
يتناسب تمامًا مع جسم السيارة مع شكل خياطة مصمم خصيصًا لطراز السيارة.
الكمية: زوج (لليسار ولليمين) شكل غير متماثل ليناسب حالة قفل المقود ، مما يضمن غطاءًا آمنًا حتى عند إيقاف الدراجة ..
يتم ضبط فتحة القفل ومواضع الحزام الثابتة لكل طراز من طرازات السيارات ..
يتم خياطة الوسادات المقاومة للحرارة على الأجزاء التي تتلامس مع نظام العادم ..
يتضمن غطاء شاشة يمكن استخدامه في السيارات المزودة بشاشة.
غطاء - مانع للخدوش أثناء التثبيت.
غطاء دراجة نارية (مع غطاء شاشة) لمطابقة حالة قفل المقود لـ PCX فقط
قماش مقاوم للماء بضغط مائي يصل إلى 20000 مم ، وهو مقاوم للماء أكثر من 10 إلى 20 مرة من غطاء الدراجة النارية النموذجي ..
اللحامات مانعة لتسرب الماء لمنع تسرب المياه
تهوية هواء لتحسين التهوية.
الكمية: زوج (لليسار ولليمين) لتصريف الرطوبة المحتجزة في المرآة
حزام يعمل بلمسة واحدة أسفل منتصف الجسم وأربطة أمامية وخلفية لحماية الرياح
خياطة وسادة مقاومة للحرارة وفقًا لوضعية نظام العادم
1. التهوية
آلية تنفيس الهواء لتهوية أفضل.
الكمية: زوج (لليسار ولليمين) لتصريف الرطوبة المحتجزة في المرآة.
2. مصنوع من قماش WRLite ، وهو أكثر مقاومة للماء 10-20 مرة من أغطية الدراجات النارية القياسية.
الجانب العكسي من خط الخياطة المعرض لتسرب المياه معالج بالعزل المائي لمنع تسرب الماء ..
3. مقاومة الرياح
يعمل الحزام الذي يعمل بلمسة واحدة في الجزء السفلي من مركز السيارة والأربطة الأمامية والخلفية على منع الغطاء من الطيران بعيدًا في مهب الريح ..
يمكن إزالة الحزام من الكمية: زوج (لليسار ولليمين).
يمكن استخدام مثبت السطح لتثبيت الرباط.
4. مقاوم للحرارة
يتم خياطة الوسادات المقاومة للحرارة في وضع نظام العادم لكل طراز سيارة ..
5. مقاومة السرقة
ثقوب سلسلة قفل كبيرة في الأمام والخلف.
لا تهتم بالقلب من خلال الغطاء إلى قفل السلسلة.
6. التمييز بين الصواب والخطأ
فتحة فتحة القفل الجانبية الأمامية مقسمة إلى فتحة حمراء وخلفية فتحة القفل الجانبية إلى اللون الأصفر ..
Various functions are positioned and sized to suit each model.
All functions are model-specific
Sewn specifically for each model for a perfect fit to the bike body.
Asymmetrical shape to match the handlebar lock condition provides secure coverage even when parking the bike.
Lock holes and fixed belt positions are set for each model.
In addition, a heat-resistant pad is sewn on the part that comes in contact with the exhaust.
Includes a windshield cover for use on bikes equipped with a windshield.
Prevents scratches when installing the cover.
・Bike cover (with windshield cover) to match the handlebar locked, exclusively for PCX
・The fabric has a water pressure resistance of 20,000mm, which is 10-20 times more water-resistant than ordinary bike covers.
Seams are watertight to prevent water intrusion
・Air ventilation for better ventilation.
Exhausts moisture trapped from left and right mirrors
・One-touch belt in the lower center of the body and front and rear drawstrings for wind protection
・Sew a heat-resistant pad to endure the exhaust system
1. Air ventilation
Air vent mechanism for better ventilation.
Discharges moisture from the left and right mirrors.
2. WRLite fabric, which is 10-20 times more water-resistant than ordinary bike covers, is used.
The backside of the sewing line, which is prone to water seepage, is treated with waterproofing to prevent water infiltration.
3. Wind-resistant
A one-touch belt in the lower center of the bike and front and rear drawstrings eliminate the risk of the cover flying away in the wind.
The belt can be removed from either side.
The drawstring can be fixed with hook and loop fastener.
4. Heat-resistant
Heat-resistant pads are sewn to match the exhaust position of each model.
5. Theft-resistant
Chain holes at front and rear for large locks.
Don't bother to flip the cover to lock the chain.
6. Front-back discrimination
The front side lock hole slit is colored red and the rear side lock hole slit is colored yellow to distinguish front and rear.