حامل لوحة ترخيص HIGHSIDER AKRON-RS PRO مدفوع. ضوء لوحة الرخصة
يتكيف حامل لوحة ترخيص HIGHSIDER AKRON-RS PRO تمامًا مع خطوط دراجتك بفضل تصميمها.
تسمح شريحة HIGHSIDER AKRON-RS PRO الخاصة بالطراز بالتركيب على نقاط التثبيت الأصلية لدراجتك وبالتالي الاستبدال دون مزيد من الحفر أو القطع.
لمنع تلف الكابلات ، تتم حماية جميع عمليات التغذية ذات الحواف الحادة بواسطة جروميت غشاء مطاطي.
لوحة الترخيص مصنوعة من صفائح فولاذية وسمكها 2 مم. يتم القطع الدقيق بالليزر. بعد الحواف ، يتم تطبيق طلاء المسحوق الأسود المقاوم للعوامل الجوية.
هذا يضمن الملاءمة والمتانة الأمثل.
من خلال الضبط غير المتدرج ، يمكنك إحضار اللوحة دون حفر في الموضع المطلوب. للحفاظ على اللوحة في هذا الوضع ، هناك برغي قفل إضافي.
أقواس إشارة الانعطاف على HIGHSIDER AKRON-RS PRO قابلة للتعديل في العرض ، مما يجعلها مناسبة لأي نوع من إشارات الانعطاف الإضافية. يتيح لك خيار الضبط هذا تعديل موضع إشارات الانعطاف الخاصة بك إلى لوحات الأرقام الأكثر تنوعًا. للسماح بتركيب إشارات الانعطاف دون فصلها عن ضفيرة الأسلاك ، يتم فتح الفتحات مقاس 10 مم على الجانب.
يمكنك أيضًا ضبط موضع العاكس بشكل فردي عبر شريط التمرير. لذلك لا يمثل التكيف مع التصميمات المختلفة للوحات ترخيص الاتحاد الأوروبي مشكلة.
لربط لوحة الترخيص بإحكام وتقليل الاهتزاز ، يتم تضمين حلقتين مطاطيتين. عازلة مطاطية أخرى تدعم لوحة الترخيص الموجودة على جانبها السفلي.
يشتمل هذا الإصدار الاحترافي من HIGHSIDER AKRON-RS على ضوء لوحة ترخيص HIGHSIDER صغير جدًا مصنوع من الألومنيوم عالي الجودة مع لوحة تثبيت وذراع دعم. ارتفاع الحامل قابل للتعديل ومصمم للسماح بالتركيب في الوضع المطلوب قانونيًا.
تفاصيل:
- قوس خاص بالطراز
- حامل إشارة الانعطاف قابل للتعديل بشكل لا نهائي
- حامل إشارة انعطاف مشقوق لسهولة التركيب بدون فصل الكابل
- عاكس قابل للتعديل بشكل لا نهائي معتمد من E
- مناسب للوحات الارقام الاوروبية
- زاوية ميل قابلة للتعديل بلا حدود
- برغي إضافي لأمان الوضع الأمثل
- تثبيت سهل بدون خطوات عمل أخرى (على سبيل المثال. حفر)
- تركيب سهل للوحة الترخيص من خلال فتحات مشقوقة
- ضوء لوحة الترخيص بما في ذلك. وشملت الحامل
- ضوء لوحة الترخيص , E- معتمد
- مصباح لوحة ترخيص قابل للتعديل بشكل لا نهائي
- العديد من الخيارات المختلفة لتركيب مصباح لوحة الترخيص
يشمل نطاق تسليم HIGHSIDER AKRON-RS PRO ما يلي:
- كتيفة خاصة بالطراز مع أجزاء تركيب
- لوحة تثبيت لوحة ترخيص HIGHSIDER AKRON-RS
- أقواس إشارة الانعطاف القابلة للتعديل
- عاكس كهربائي مع دعامة قابلة للتعديل
- مصباح لوحة ترخيص إلكتروني معتمد
- تعليمات التركيب
ملاحظات:
- إذا تم تركيب عاكسات جانبية على حامل لوحة الترخيص الأصلي ، فيجب إعادة تركيبها في وضع مناسب أو استبدالها بأخرى جديدة.
- بالنسبة لإشارات الانعطاف الأصلية ، يتوفر حامل إشارة الانعطاف الخاص 280-970 اختياريًا.
تلميح:
إذا لم تجد حامل لوحة ترخيص خاص بطراز لسيارتك حاملو لوحة الترخيص العالمية من HIGHSIDER المتوفرة في العديد من التصميمات المختلفة فهي بالتأكيد بديل جيد.
HIGHSIDER AKRON-RS PRO license plate holder incl. license plate light
The HIGHSIDER AKRON-RS PRO license plate holder adapts perfectly to the lines of your motorcycle thanks to its design.
The model-specific bracket of the HIGHSIDER AKRON-RS PRO allows mounting on the original mounting points of your motorcycle and thus a replacement without further drilling or cutting.
To prevent damage to cables, all sharp-edged feedthroughs are protected by a rubber membrane grommet.
The license plate is made of sheet steel and 2mm thick. The precise cutting is done by laser. After edging, the weather-resistant black powder coating is applied.
This ensures the optimal fit and durability.
Through the full adjustable you can bring the plate without drilling in the desired position. To keep the plate in this position, there is an additional locking screw.
The turn signal brackets on the HIGHSIDER AKRON-RS PRO are adjustable in width, making them suitable for any type of accessory turn signal. This adjustment option allows you to adapt the position for your turn signals to the most varied license plates. To allow mounting the turn signals without disconnecting them from the wiring harness, the 10mm holes are slotted to the side.
You can also adjust the position of the reflector individually via a slider. An adaptation to the different designs of the EU license plates is therefore no problem.
To screw the license plate securely and reduce vibration, two rubber washers are included. Another rubber buffer supports the license plate on its underside.
Included in this PRO version of the HIGHSIDER AKRON-RS is the very small HIGHSIDER license plate light machined from high quality aluminum with mounting plate and support arm. The bracket is adjustable in height and designed to allow mounting in the legally required position.
Details:
- model-specific bracket
- infinitely adjustable turn signal holder
- slotted turn signal holder for easy mounting without cable separation
- infinitely adjustable reflector, E-approved
- suitable for European number plates
- infinitely adjustable tilt angle
- additional screw for optimum position security
- easy fixation without further work steps (e.g. Drilling)
- easy mounting of the license plate through slotted holes
- License plate light incl. Holder included
- License plate light, E-approved
- Continuously adjustable license plate light
- Many different options for mounting the license plate light
The scope of delivery of the HIGHSIDER AKRON-RS PRO includes:
- Model-specific bracket with mounting parts
- HIGHSIDER AKRON-RS license plate mounting plate
- Adjustable turn signal brackets
- E-approved reflector with adjustable bracket
- E-approved license plate light
- Mounting instructions
Notes:
- A special blinker bracket is optionally available for the original blinkers in the accessories tab.
- If your original license plate holder has reflectors fitted to the side,these must be refitted in a suitable position or replaced with new ones.
Tip:
If you have not found a model-specific license plate holder for your motorcycle, the universal license plate holders from HIGHSIDER, which are available in many different designs, are certainly a good alternative.