البولي كربونات كمعدات قياسية.
واقي يد أنيق مع واقي يد من نوع ملحق بنهاية قضيب من البولي كربونات (الكمبيوتر) حامي كمعدات قياسية.
البولي (الكمبيوتر) ، مقاوم للصدمات ، الأشعة فوق البنفسجية ، درجات الحرارة المنخفضة والعالية ، تصميم بسيط وأنيق عالمي للغاية ويمكن استخدامه في أي نمط من السيارات ..
فهو لا يزيد من تأثير مقاومة الرياح فحسب ، بل له أيضًا وظيفة تخفيف التأثير من الأمام ..
سهلة التركيب بمجرد التثبيت في نهاية المقود.
توفر المقابس الطرفية المصنوعة من سبائك الألومنيوم عالية القوة تثبيتًا قويًا دون تعقيد واقي اليد التقليدي ..
يمكن إزالة الواقي وإرفاق تصميمات ZETAProtector الأخرى ، مما يتيح لك الاستمتاع بالتصميم المفضل لديك ..
من خلال فك ArmBolt ، يمكن ضبط الزاوية رأسياً وأفقياً بدون أي خطوات حول نهاية الشريط ..
يسمح الفاصل المخصص بتعديل الموضع من CenterPosition بمقدار 5 درجات لكل خطوة ، و 4 خطوات لأعلى و 4 خطوات لأسفل ، ليصبح المجموع 9 خطوات ..
تتكيف بسهولة مع التصميم المفضل لديك.
يسمح أخدود سدادة نهاية القضيب بتعديل موضع الذراع بخطوتين ليناسب السيارة ..
يمنع الجسم من السقوط ويعمل أيضًا كسدادة لمنع تلف أنبوب الخانق بسبب الانقلاب ..
واقي المفصل مصنوع من راتينج PU الناعم والمرن.
يقلل من تأثير الصدمات من الأمام ويمنع إلحاق الضرر بجسم الحارس ..
يتوفر خياران للتصميم من خلال إرفاق وفك اللوحة الأمامية بعلامة الشعار المطبوعة بالليزر ..
واقي البولي كربونات القابل للإزالة كمعدات قياسية.
يمكن تثبيت ZETA XCProtectorSeries.. استمتع بمجموعة كبيرة من التصميمات.
[الحامي القابل للحاق].
・ واقي ZETA X3
・ ZETA X2Protector
・ ZETA XCProtector
・ ZETA XC-PROProtector
[كيفية اختيار حارس SONICHand]
النوع العالمي ZS72-2000 / ZE72-2100
يمكن تثبيته على المركبات المجوفة عن طريق إزالة سدادة نهاية الشريط.
مركبات هوندا
إذا كان هناك نصف قمر بوزن داخلي على شكل مراحل في منطقة التثبيت ، فيمكن تثبيته إذا تمت إزالة الوزن الداخلي وكانت المنطقة مجوفة ..
سيارات سوزوكي
يمكن إزالة الوزن الداخلي إذا كان موجودًا أو مثبتًا إذا كان مجوفًا ..
M16 / M8 نوع ZS72-2001 / ZS72-2101
قم بإزالة سدادة طرف القضيب وتحقق من جزء نهاية المقود ..
مركبات ياماها
يمكن توصيله بالمقود بنهاية مقود مشكَّلة آليًا بخطوة M16 مقاس 1.5 مم.
مركبات KAWASAKI
يمكن تثبيته على مقود مع صمولة M8 ملحومة بنهاية المقود.
Polycarbonate protectors are standard.
Stylish handguard with bar-end-mounted handguard polycarbonate (PC) protector as standard equipment.
Polycarbonate (PC), which is resistant to impact, UV rays, low and high temperatures, has a versatile, simple and stylish design that can be used in any style of bike.
Not only does it increase wind resistance, it also has the function of mitigating impact from the front.
Installation is as simple as fixing it to the handlebar end.
While not requiring the complexity of a conventional handguard, it is firmly secured with a high-strength aluminum alloy bar-end plug made by machining.
The protector can be removed for use, or a ZETA protector of another design can be attached, allowing the user to enjoy their preferred styling.
■By loosening the arm bolts, the angle can be adjusted steplessly up and down on the axis of the bar end.
■The dedicated spacer allows position adjustment from the center position by 5 degrees per level, 4 levels up and 4 levels down, for a total of 9 levels.
Easily adapted to your preferred styling.
■The groove in the bar end plug allows the arm position to be adjusted to two positions.
It prevents the body from falling off and also functions as a stopper to prevent damage to the throttle tube due to tipping.
■Knuckle guards are made of soft and supple PU resin.
Mitigates impact from the front and prevents damage to the guard body.
■Two design options are available by attaching and detaching the front plate with laser-printed logo mark.
■Removable polycarbonate protectors are standard.
■ZETA XC Protector series can be attached.A wide range of styling can be enjoyed.
[Protector can be installed]
・ZETA X3 Protector
・ZETA X2 Protector
・ZETA XC Protector
・ZETA XC-PRO Protector
[How to choose a sonic handguard]
Universal type ZS72-2000 / ZE72-2100
It can be installed on bikes with bar end plugs removed and hollowed out.
●HONDA Bikes
If the mounting section has a half-moon stepped inner weight, it can be mounted if the inner weight is removed and the section is hollow.
●SUZUKI Bikes
Inner weights can be removed if present and attached if hollow.
[Representative Models]
CT125, GB350/S, CB400 SUPER FOUR, CB1100/RS/EX, CB1300 SUPER FOUR, V-STROM 250
Remove the bar end plugs and check the handlebar ends.
●YAMAHA Bikes
It can be installed on handlebars with handlebar ends machined with M16 pitch 1.5mm.
●KAWASAKI Bikes
It can be installed on handlebars with M8 nuts welded to the handlebar ends.