لماذا هو ضروري؟
كيف يمكننا التوفيق بين موضوعي "كفاءة التبريد" و "أداء الحماية" المتضاربين ؟.
حشرات تطير باتجاه الحجارة الصغيرة والقمامة ، الضوء يتدحرج من الاطار الامامي ... إلخ
هذه تسبب ضررًا لقلب الرادياتير المصنوع من زعانف الألومنيوم.
عندما يتم سحق الزعانف ، يفقد تأثير التبريد ، وفي بعض الحالات ، يتلف خط الماء وهناك خطر التسبب في تسرب سائل التبريد ...
الميزات التي قدمها مصنع النقش
تم اختبار واقي الرادياتير الأساسي لمصنع النقش عدة مرات بشكل رئيسي في سباق التحمل لمدة 8 ساعات في منتصف الصيف ، والذي يمكن القول أنه الأكثر خطورة بالنسبة للرادياتير.
موضع MeshPattern وسماكة MeshLine وفتحة العدسة هي ردود الفعل من مشهد السباق ..
منطقة مركزية دقيقة ونمط شبكة سداسي خشن على كلا الجانبين.
وهذا يعني أن الأحجار الصغيرة والقمامة التي يتم لفها من الإطار الأمامي سيتم حراستها بواسطة شبكة دقيقة في المنتصف تتناسب مع عرض الإطار ..
تحتوي الشبكة الخشنة لكلا الجانبين على نسبة فتحة تعمل على موازنة الموضوعات المتضاربة لـ "كفاءة التبريد" و "أداء الحماية" ..
هناك سبب لاختيارنا المواد ..
في حالة الألومنيوم أو التيتانيوم ، لا يمكن تحقيق عرض MeshLine إلا من خلال تقليل سماكة اللوحة (قوة) ولكن باستخدام الفولاذ المقاوم للصدأ (SUS304 0.8t) ، يمكن تحقيق عرض الخط المثالي دون تقليل القوة ..
لا يعد Core guard عنصرًا للحفاظ على الأداء فحسب ، بل له أيضًا تأثير ارتداء الملابس لجذب الجمال بشكل عرضي ..
الحماية والسحر.
لآلة التقرح الكبيرة الخاصة بك ، نوصي بها بثقة!.
■Why is this necessary?
How do we balance the conflicting themes of "cooling efficiency" and "protection performance"?
Pebbles and debris rolled up from the front tires, insects flying at the lights...etc.
These will damage the radiator core which is made up of aluminium fins.
When the fins are crushed, the cooling effect is lost, and in some cases, the water line may be damaged, causing a coolant leak...
■Features made by Etching Factory
The radiator core guard of the etching factory has been tested many times in the 8 hours endurance road race in midsummer, which is the most severe race for the radiator.
The placement of the mesh pattern, the thickness of the mesh lines, and the aperture ratio are all based on feedback from the racing scene.
Fine mesh pattern in the center and coarse mesh pattern on both sides.
This ensures that pebbles and debris spun off from the front tire are guarded by a fine mesh in the center that matches the width of the tire.
The coarse mesh on both sides has been designed with an aperture ratio that takes into account the conflicting themes of "cooling efficiency" and "protection performance".
■There is also a reason for the choice of material.
In the case of aluminum or titanium, the mesh line width can only be achieved by reducing the plate thickness (lowering the strength), but by using stainless steel (SUS304 0.8t), the ideal line width can be achieved without lowering the strength.
Based on the above, the core guard is not only an item to maintain the performance of the vehicle, but also has a dress-up effect to show off the beauty of the vehicle in a casual manner.
To protect, to charm.
It is recommended with confidence for your valuable machine.