[المواصفات. ] صندوق منظف الهواء المخزون
[لون الجسم] أسود (الغطاء العلوي ومزلاج الصرف كلاهما أحمر)
[عيار] Φ32
[الملعب المكربن] 77-93-77
[موقع الرابط] مركز
[القطر الخارجي للذيل (مم)] 34mm
[طول الحنفية (مم)] 27mm
[محتويات المنتج]
المكربن الجسم (جسم المكربن الأسود TMR-MJN32)
صندوق منظف الهواء
أنبوب الخانق الداخلي لـ Z1
أنبوب وقود
TJoint / خرطوم الوقود
MJ: # 107.5 # 117.5 PAJ: # 105 # 115
دليل المالك TMR
[الإعداد الأصلي]
MJ: # 122.5 PJ: # 22.5 PAJ: # 110 PS: 1 و 1/4 ظهر للخلف
* مرجع MJ عند استخدام عادم مخزون البيانات: # 120
[مواصفات مركبة التطوير. ]
Z1: مخزون المحرك
حجم نزوح المحرك : 903cc
حفر حفرة صندوق منظف الهواء
[الأجزاء المثبتة []
نظام العادم: YOSHIMURA Racing Hand Bent Straight Cyclone (الذكرى الأربعون)
المشعل: SP2 إعدادات مجموعة الطاقة الكاملة: # 0 Stock SPECIAL (AS Utani الجزء رقم: 0310P)
الأجزاء من قارنة التوصيل إلى مستشعر TPS غير متوفرة من YOSHIMURA ، لذا يرجى تحضيرها بشكل منفصل.
يمكن تركيب TPS في زاويتين مختلفتين. (لمعايرة المستشعر).
يوصى بحفر فتحتين بقطر 43 مم في صندوق منظف الهواء. من الممكن التشغيل بدون تعديل ، لكن لا يمكن عرض الأداء الأصلي.
من الممكن التغيير إلى مواصفات مسار التحويل ، ومواصفات مسار التحويل المزدوج ، ومواصفات مرشح الطاقة عن طريق شراء الأجزاء بشكل منفصل ، ولكن نظرًا لعدم وجود بيانات إعداد ، فمن الضروري تعيينها بنفسك.
قد يتم تضمين أنواع ومنتجات أخرى في الصورة.
يرجى ملاحظة أن مواصفات المنتج قد تتغير لأسباب من الشركة المصنعة.
[Specification] Normal air cleaner box
[Body color] Black (Top cover and drain bolt are red)
[Caliber] Φ32
[Carburetor pitch] 77-93-77
[Link position] Center
[Spigot outer diameter(mm)] 34mm
[Spigot length(mm)] 27mm
[Product Description]
・Carburetor Body(TMR-MJN32 Carburetor Black Body)
Air cleaner box adapter
Throttle Inner Pipe for Z1
Fuel hose
T Joint / Fuel Hose
MJ:#107.5 #117.5 PAJ:#105 #115
TMR Owner's Manual
[factory setting]
MJ:#122.5 PJ:#22.5 PAJ:#110 PS:1 and 1/4 turn back
*Reference data when using the standard exhaust MJ:#120
[development vehicle specifications]
Z1:Engine stock, displacement 903cc, air cleaner box drilled
Installed parts
Exhaust:Yoshimura Racing Hand Curved Straight Cyclone (40TH ANNIVERSARY)
Igniter:SP2 Full Power Kit Configuration:#0 Normal Special (AS Utani Part Number:0310P)
*TPS is available for data loggers and igniters.The parts from the coupler to the TPS sensor are not available from YOSHIMIURA, so please prepare them separately.
*The TPS can be mounted at two different angles.(for sensor calibration)
*Φ43X2 holes are recommended for air cleaner box.It is possible to drive without modification, but the original performance cannot be demonstrated.
*It is possible to change to the funnel specification, dual stack funnel specification, and power filter specification by purchasing parts separately, but since there is no setting data, it is necessary to set it by yourself.
*Images may contain other types and products.
*There may be changes in product specifications due to the manufacturer's reasons.