لون الدبوس: ستانلس ستيل
نوع: الحق
لالخلفي
الكمية: 1PC.
[نوع عائم] semiFloating
[المواصفات. ]
M8: 250 ملم
SUS304 سمك 0.8 طن: 5.0 مم
دقيقة. العاشر. دقيقة: 4.5 ملم
القطر الداخلي: 110 مم
PCD: 130MM
(حد الاستخدام) : 4
قطر: 10MM
عرض لوحة فعالة: 32mm
النوع الخارجي: WorksGroove
صنع في اليابان
* يرجى ملاحظة أن مواصفات المنتج قد تتغير بسبب أسباب الشركة المصنعة.
* بالنسبة للون بأكسيد ، يرجى ملاحظة أنه سيكون تلطيخ مع لون رقيق بسبب المسنين.
* يرجى التحقق من حجم OEM على صفحة تأكيد SUNSTAR المقابلة قبل الشراء نظرًا لوجود حالات مختلفة عن قطر قرص OEM.
* لا تضمن مراسلات قرص الفرامل التركيب بخلاف نفس الحجم (القطر الخارجي وسمك اللوحة) كالطبيعي.
* عند تغيير القطر الخارجي للقرص وسمكه ، احرص على عدم التداخل مع الأجزاء الطرفية. عند التغيير من قرص صلب إلى قرص عائم ، يرجى الحرص على عدم التداخل مع الأجزاء الطرفية.
يختلف تصميم الدوار الداخلي حسب طراز السيارة بسبب الاختلاف في أبعاد التركيب (القطر الداخلي) على عجلة القيادة. يرجى ملاحظة أنه لا يمكنك اختيار تصميم من نفس النوع.
* لأنه جزء أمني مهم ، يرجى استشارة متجر متخصص لديه الخبرة والمهارات والمعدات للتثبيت.
* يرجى ملاحظة أن هناك حالات تم فيها استبدال الشكل الداخلي بسبب الاستبدال في مواصفات المنتج.
* يُباع هذا المنتج بقطعة واحدة. يرجى التحقق من عدد المركبات المراد تركيبها وشرائها
* يرجى ملاحظة أن العناصر التي يمكن تحديدها قد تتغير حسب المنتج.
* نظرًا لأن عرض الوسادة الفعال قد يكون مختلفًا ، تحقق من الفرجار المستخدم.
* قد يتم تضمين أنواع وألوان أخرى في الصورة.
Pin Color: Stainless steel
Type: right
For rear
[Quantity] 1pc.
[Floating type] Semi-floating
[Specification]
Outer Diameter: 250 mm
Plate thickness :5.0 mm
MIN. TH. (Usage limit): 4.5 mm
Inner diameter: 110 mm
PCD: 130 mm
Number of holes: 4
Diameter: 10mm
Pad effective width: 32mm
Outer Type: Sunstar works group
Made in Japan
*There may be changes in product specifications due to the manufacturer's reasons.
*Color anodized aluminum will change its color lightly over time.
*Please refer to the Sunstar compatibility check page to confirm the size of the stock disc before purchasing.
*Compatibility of brake discs does not guarantee the installation of discs other than the same size (outside diameter and thickness) as the stock discs.
*When changing the outer diameter or thickness, be careful not to interfere with peripheral parts or cause problems.Also, when changing from a solid disc to a floating disc, be careful not to interfere with peripheral parts.
*The design of the inner rotor differs depending on the type of vehicle due to the difference in the installation dimensions (inner diameter) of the wheel.Please note that you cannot choose the design by the same type.
*The inner shape is subject to change due to product specification changes.
*This product is sold as a single piece.Please confirm the number of sheets for the vehicle to be installed and purchase.
*The settings of the selectable items may vary depending on the product.
*Please check the caliper to be used as the effective pad width may vary.
*The images may include other types and colorings.