OEM الخلفي الحاجز / نظام العادم / حامل الخطوة الترادفية فقط
الغطاء العلوي الداعم: Monokey ، قفل أحادي
أقصى وزن تحميل كبير (MONOKEY) : 6 كجم
[تم تثبيت العناصر المحددة في نفس الوقت]
・ مونوكي: M5Base
・ قفل أحادي: M5MBase
* من المستحيل تركيب مع مجموعة مزيل الحاجز.
* بالنسبة للحالات ذات القاعدة MM ، و B32 ، والحالات أحادية القفل التي تقل عن 30 لترًا ، وللحالات ذات القاعدة M5M ، والحالات أحادية القفل التي تقل عن 30 لترًا (B270N ، B27N ، B260NX ، E250 ، E230 ، إلخ.) لا يمكن استخدامها لأن السدادة المطاطية لن تتلامس مع بعض الأماكن وسوف تسبب خشخشة أثناء القيادة.
* يجب عدم استخدام تركيبات GIVI والتركيبات الأصلية الخاصة بـ Daytona في الحالات التي لا تتبع GIVI. لا يمكن تحميل Daytona و GIVI المسؤولية تحت أي ظرف من الظروف عن استخدام حالات غير متعلقة بـ GIVI.
* قد تكون هناك اختلافات في الطلاء ، واللحام ، ومعالجة الأسطح ، والخدوش ، والنتوءات ، والتشوهات ، وما إلى ذلك. بسبب مواد المنتج وطرق التصنيع والاختلافات الفردية بين المنتجات وظروف النقل في الخارج وما إلى ذلك. يرجى فهم مسبقا.
* نظرًا للاختلاف الفردي بين المنتج والمركبة ، هناك احتمال لحدوث عدم محاذاة للفتحة ، واختلاف في التوازي بين الأمام والخلف ، واليسار واليمين ، والتلامس مع غطاء السيارة ، إلخ.. لذلك ، يوصى بإنجاز أعمال التركيب بواسطة ميكانيكي ماهر في متجر دراجات بخارية مجهز جيدًا أو منشأة صيانة معتمدة. يوصى بتثبيت كل جزء مؤقتًا وتشديده أخيرًا أثناء مراقبة الحالة.
* يرجى ملاحظة أن مواصفات المنتج قد تتغير بسبب أسباب الشركة المصنعة.
For stock rear fender / exhaust / pillion step holder
Compatible Top Cases: Monokey, Monolock
Maximum loading weight (mono key): 6kg
[specified items installed at the same time]
・Mono key: M5 Base
・Monolock: M5M Base
*Fender eliminator kit cannot be installed at the same time.
*MM base cannot be used with B32 and monolock cases less than 30l, and M5M base cannot be used with monolock cases less than 30l (B270N, B27N, B260NX, E250, E230, etc.) because the rubber stopper will not be in contact with some places and it will cause rattling during riding.
*GIVI fittings and Daytona original fittings should not be used on non-GIVI cases.Daytona and GIVI cannot be held responsible in any way for the use of non-GIVI cases.
*There may be differences in painting, welding, surface treatment, scratches, burrs, and distortions due to product materials, manufacturing methods, individual product differences, and overseas shipping conditions.
*Due to the individual difference between the product and the vehicle, there is a possibility of hole misalignment, difference in parallelism between front and rear, left and right, and contact with the vehicle cowl, etc. Therefore, it is recommended to have the installation work done by a skilled mechanic at a well-equipped motorcycle shop or certified maintenance facility.For installation, temporarily fasten each part and finally tighten them while observing the condition.
*There may be changes in product specifications due to the manufacturer's reasons.