إنه مقعد سميك مزدوج يمكن تثبيته على OEMSeat Cowl الذي يمكن تثبيته على جميع طرز Carburetor / FI (بما في ذلك آخر 5 طرز) (باستثناء النموذج الأولي 78) ..
عرض سطح المقعد أكبر من عرض OEMSeat لتحسين راحة الركوب ، والمنطقة التي يتم فيها إنزال القدمين أضيق وأقل زاوية لتحقيق قدم مشابه لمقعد OEM.
كلما كان موضع الجلوس أعلى ، كان ثني الركبة أكثر ارتخاءً ، وكلما اقترب وضع الركوب من وضعية الوقوف ، زاد الحمل على الأرداف المنقولة إلى مسند القدم ..
من خلال زيادة حمولة القدم ، يتم تقليل الحمل على الأرداف ، كما أنه يسهل تشغيل السيارة باستخدام دواسة القدم ..
إنه مقعد يجعل التجول لمسافات طويلة أكثر راحة ومتعة ..
يتم إطلاق إسفنجة الحقن في القالب ..
التوسيد جيد ويحدث تدهور طفيف بمرور الوقت ، لذا يمكنك استخدامه لفترة طويلة ..
[مميزات]
يُستخدم اللون الأسود العادي للجلد بأكمله ، بما في ذلك لفة الثنية في وسط المقعد ، وتنتهي خطوط التماس بالدرزات ..
نوع مع StitchLine يمتد إلى جانب الخزان ..
[التركيب]
يجب نقل مخمد المقعد من OEMSeat للتركيب على السيارة ..
قم بتثبيت الدعامة المرفقة على جانب خزان الوقود ، وقم بإصلاح الجانب الخلفي بمسامير مقعد OEM وكذلك مقعد OEM.
يمكن استخدامها مع سكة مسك OEM وحاجز خلفي.
This is a thick double seat that can be installed with the stock seat cowl for all years of carburetor / FI (including the last model 5) (except '78 early model).
The width of the seat surface is wider than the stock seat to improve the ride comfort, and the part where you put your feet down is narrower and less angular to achieve the same footing as the stock seat.
The higher the seating position, the looser the bend of the knees becomes, and the riding posture becomes closer to the standing posture, and the load of the buttocks is transferred to the step.
By increasing the step load, the load on the buttocks is reduced and it is easier to control the vehicle with the step.
It is a seat that makes long touring more comfortable and enjoyable.
The injection sponge is fired in the mold.
The cushioning is good and does not deteriorate over time, so you can use it for a long time.
[Features]
The entire leather, including the tuck roll in the center of the seat, is plain black with stitched seam lines.
The stitch line extends to the tank side.
[Installation]
It is necessary to transfer the seat damper from the stock seat for installation to the vehicle.
Install the attached bracket on the gasoline tank side, and fix the rear side with the stock seat bolts just like the stock seat.
It can be used with stock grab rails or K & H rear fenders.