* يبلغ ارتفاع هذا المنتج 65 مم تقريبًا وأقل ارتفاعًا بمقدار 3 مم عن مقبض المخزون.
* العرض الكلي هو -5 مم في نهاية ذراع المخزون. (العرض الكلي: ± 20 مم / الارتفاع الكلي: ± 40 مم) لا يلزم إجراء أي تغيير هيكلي.
* ليست هناك حاجة لتغيير الخرطوم / الحزام / السلك لهذا المنتج ، ولكن إذا كنت قلقًا بشأنه ، فيرجى تغيير خرطوم الفرامل إلى الطول المناسب. يرجى ضبط شد السلك المحوري بسبب تغيير المناولة.
* يوجد خطأ في سُمك الطلاء بهذا المنتج. عندما تدير جانب المحور ، قد يكون باهتًا. في هذه الحالة ، من الضروري ضبط جانب دواسة الوقود من المقود عن طريق الحلاقة بالملف.
* علامات التثقيب الموجودة على هذا المنتج هي للإشارة فقط. يرجى ضبط موضع المقبض حسب رغبتك.
* هناك حالة أن فتحة صندوق التبديل لهذا المنتج خارج المحاذاة قليلاً. في مثل هذه الحالة ، قد يكون من الضروري تعديلها عن طريق توسيع الفتحة. إذا كنت شخصًا متقلبًا بشأن التثبيت المثبت بمسامير ، أو كنت قلقًا بشأن تكلفة العمالة والعملية ، فإننا نوصيك بالتشاور مع متجر Honda Dream مسبقًا.
* يرجى ملاحظة أن مواصفات المنتج قد تتغير بسبب أسباب الشركة المصنعة.
[Size*] W: 710 H: 100 R: 200 L: 130
[Handle diameter] 1 inch (25.4mm)
*W (Overall width) H (Height) R (Amount of pullback) L (Clamp section straight) Unit (mm)
*This product is approximately 65mm back and 3mm lower in height than the stock handle.
*Overall width is -5mm at the end of the stock lever.(Full width: ±20mm / height: ±40mm) No structural changes are required.
*This product does not require any changes to the hoses / harnesses / wires, but if you are concerned, please change the brake hoses to an appropriate length.Adjust the tension of the axle wire due to the changes in handling.
*The thickness of the paint on this product may vary.There may be a dullness when turning to the axle side.In this case, it is necessary to adjust the throttle sleeve side of the handlebar by shaving with a file.
*The punch marks on this product are for reference only.Please adjust the position of the handlebar to your liking.
*The holes in the switch box of this product may be slightly out of alignment.In this case, it is necessary to widen the hole.If you are a person who is finicky about bolt-on installation, or if you are nervous about the labor cost and process, it is recommended that you consult with your HONDA Dream shop beforehand.
*There may be changes in product specifications due to the manufacturer's reasons.