[وصف المنتج]
حامل جانبي قابل للتعديل للاستخدام مع مجموعة كبيرة من الدراجات المخصصة ، بما في ذلك الإطارات المنخفضة والدراجات المنخفضة.
حامل جانبي قابل للتعديل للاستخدام مع مجموعة كبيرة من الدراجات المخصصة ، بما في ذلك الإطارات المنخفضة والدراجات المنخفضة.
يمكن ضبط هذا المنتج عن طريق تدوير مسمار الحامل لضبط طول الحامل الجانبي المطلوب ليناسب دراجتك المخصصة.
من الممكن أيضًا تثبيت مفتاح قياسي للحامل الجانبي بحيث يمكنك استخدام وظيفة رجوع الحامل الجانبي.
يمكن تثبيته حتى في حالة عدم استخدام مفتاح الحامل.
هيكل الحامل وصمولة التثبيت من الألومنيوم المشكل بالخراطة ، في حين أن الخطاف الزنبركي والمسمار المحوري ومسمار الحامل مصنوعان من الفولاذ المقاوم للصدأ.
يمنع استخدام مواد الألمنيوم والفولاذ المقاوم للصدأ التآكل الناتج عن الصدأ الذي يحدث مع حوامل المخزون.
مادة الألمنيوم مؤكسدة بأكسيد الألمنيوم الفضي لمقاومة فائقة للتآكل ، وشعار النقش بالليزر على هيكل الحامل.
يأتي تكوين المنتج بغطاء أنبوب أسود.
يمنع غطاء الأنبوب المسامير الملولبة من الاتساخ ويعزز تأثير ارتداء الدراجة.
■ كيفية التثبيت
■ نطاق ضبط جانبي قابل للتعديل : 36 مم أقصر من المخزون - 19 مم أطول
- إذا تم تمديد الرافعة من وضع المخزون (تقريبًا. 196 مم) ، سوف يتداخل مع الحامل الأوسط.
■ يتم إعادة استخدام زنبركات المخزون.
■ امتصاص الصدمات الخلفي المنخفض SP Takegawa (25 مم لأسفل) 06-04-0094 / 0095/0096/0097 و (40 مم لأسفل) 06-04-0119 / 0120/0121/0122 يمكن تركيبها في نفس الوقت.
Adjustable side stand for stock steps for a wide range of custom vehicles, including low-profile tires and lowered vehicles
■Details
This is an adjustable side stand for a wide range of custom vehicles including low profile tires and lowered vehicles.
This product can be fine-tuned by rotating the stand bolt to set the desired side stand length to suit your custom vehicle.
It is also possible to install the stock side stand switch so that you can still use the side stand return function.
It can be mounted without stand switch.
The stand body and fixing nut are machined from aluminum, and the spring hook, pivot bolt and stand bolt are made from stainless steel.
The use of aluminum and stainless steel prevents the corrosion caused by rust that occurs with stock stands.
The aluminum material is anodized silver for superior corrosion resistance, and the laser marking logo is on the stand body.
Product configuration includes a black tube cover.
By installing the tube cover, the dirt of the stat bolt is prevented and the dress-up effect of the vehicle is improved.
■About installation
■Adjustable side stand adjustment range: 36mm shorter than stock - 19mm longer
*If you extend it from the stock position (approx. 196mm), it will interfere with the center stand.
■The stock spring will be reused.
■It can be installed with SP Takegawa's Low Down Rear Shock Absorber (25mm down) 06-04-0094 / 0095 / 0096 / 0097 and (40mm down) 06-04-0119 / 0120 / 0121 / 0122.