إنه مقعد مزدوج سميك يمكن تركيبه مع غطاء مقعد OEM يمكن تركيبه على جميع طرازات المكربن / FI.
عرض المقعد أوسع من مقعد OEM بحيث تكون الركوب مريحة ، والقدم تشبه مقعد OEM عن طريق تخفيف جزء القدم والقضاء على الزوايا المربعة.
عندما يصبح وضع الجلوس أعلى ، يصبح انحناء الركبة فضفاضًا ، ويصبح وضع الركوب أقرب إلى الوضع القائم ، وينتقل الحمل على الوركين إلى مشط القدم.
من خلال زيادة حمولة الأقدام ، يتم تقليل العبء على الوركين ، ومن الأسهل تشغيل الجسم باستخدام أداة القدم.
مقعد يجعل التجول الطويل أكثر راحة ومتعة.
استخدم اسفنجة الحقن المطلقة في القالب.
لها خصائص وسادة جيدة وتدهور بسيط مع مرور الوقت ، بحيث يمكنك استخدامها لفترة طويلة.
■ الميزات
يستخدم الجلود بالكامل باللون الأسود العادي ، وينتهي خط الخياطة بالغرزة.
وهناك نوع حيث يدور حول StitchLine مرة واحدة.
■ التركيب
من الضروري نقل مخمد المقاعد من مقعد OEM للتثبيت على جسم السيارة.
قم بتثبيت الحامل المرفق مع جانب خزان الوقود ، وقم بتثبيت الجانب الخلفي باستخدام مسند مقعد OEM مثل مقعد OEM.
يمكن استخدامه مع OEM Grab Rail أو K & H Rear Fender.
عند استخدامها مع ناقل الحركة Gear Y ، يجب عكس الأجهزة المتزايدة.
This is a thick double seat that can fit the stock seat cowl on all years of carburetor / FI models.
The width of the seat surface is wider than the stock seat to improve the ride comfort, and the part where you put your feet down is narrower and less angular to achieve the same footing as the stock seat.
The higher the seating position, the looser the bend of the knees becomes, and the riding posture becomes closer to the standing posture, and the load of the buttocks is transferred to the step.
By increasing the step load, the load on the buttocks is reduced and it is easier to control the vehicle with the step.
It is a seat that makes long touring more comfortable and enjoyable.
The injection sponge is fired in the mold.
The cushioning is good and does not deteriorate over time, so you can use it for a long time.
■Features
The entire leather is plain black, with stitched seam lines.
This is type A with a stitch line that goes around one side.
■Mounting
It is necessary to transfer the seat damper from the stock seat for installation to the vehicle.
Install the attached bracket on the gasoline tank side, and fix the rear side with the stock seat bolts just like the stock seat.
It can be used with stock grab rails or K & H rear fenders.
When using with Y's gear carrier, it is necessary to attach the mounting bracket upside down.