يجعل الفصل من السهل التعامل مع إمكانية التأمين ويوسعها.
[هيكل منفصل لم يسبق له مثيل. 270 سم تصميم طويل إذا تم توصيله.]
قفل سلسلة طويلة له نطاق كبير قابل للقفل.
المفاضلة لهذا التأثير هو قابلية التشغيل عند القفل.
قفل DoubleLoopStrongChain يعتمد هيكل فصل لقفل سلسلة طويلة عام ، بالإضافة إلى تحسين التشغيل ، فإنه يدعم أيضًا قفلًا مختلفًا.
تصميم طويل بطول إجمالي 270 سم.
تصميم بطول 270 سم يقفل العجلات الأمامية والخلفية لدراجة نارية في وقت واحد ، ويغلق أيضًا عدة دراجات نارية في وقت واحد.
دمج السلسلة هو سلسلة أوبا الرافعة من جانب واحد (خاتم على شكل حرف O) يمكنك الاتصال بسهولة عن طريق تمرير السلسلة الأخرى.
يسهل التعامل معها لأنه منفصل.
يستغرق قفل قفل سلسلة طويلة واحد وقتًا طويلاً بسبب طوله ووزنه.
نظرًا لأن قفل السلسلة مفصول ، فمن الأسهل التعامل مع دورة المحرك ، ويتم تقليل خطر التداخل مع العجلة أثناء العمل.
■ يمكن استخدامها مع جسم واحد.
طول كل سلسلة يتم فصلها 120 سم و 2 سم 150 سم.
إذا كنت تمتلك دراجتين ناريتين مثل Sub and Main ، فمن المستحسن أيضًا لأقفال السلسلة الفردية.
سلسلة 150 سم ملونة باللون الأسود حتى الطرف ويمكن تمييزها.
[يدعم مجموعة واسعة من طرق القفل لأنه نوع منفصل]
عادة ما تكون أقفال السلسلة للدراجات النارية سلاسل طويلة تدعم مجموعة واسعة من الأقفال.
بسبب طوله ، ليس فقط مشكلة المناورة من خلال عجلة الدراجات النارية ، ولكن أيضًا ينطوي على خطر الإضرار بجسم السيارة دون قصد.
يعد القفل أيضًا عملاً ثقيلًا بالنسبة للمستخدم الثقيل ويتم قفله بشكل متكرر.
قفل DoubleLoopStrongChain 150 سم (أسود) و 120 سم (فضة) الكمية: إن اعتماد نوع منفصل يتكون من سلسلة 2 قطعة يتيح قفل العجلات الأمامية والخلفية بشكل فردي ، مما يساهم في كفاءة العمل وتقليل العبء.
كما أن لديها تعدد الاستخدامات المتاحة على BodySingle Body.
■ مثال 1: قفل بتوصيل العجلات الأمامية والخلفية (1)
طريقة قفل عامة يتم تثبيتها حول العجلات الأمامية والخلفية أثناء توصيل السلسلة.
وهو يتوافق مع دراجة نارية قصيرة من قاعدة العجلات مثل SSMotorcycle.
■ مثال 2: توصيل العجلات الأمامية والخلفية بالقفل (2)
طريقة قفل تقوم بتوجيه السلسلة بشكل منفصل إلى العجلة الأمامية والعجلة الخلفية وتثبيتها بالمنتصف.
وهو يتوافق مع دراجة نارية مع قاعدة عجلة طويلة مثل كروزر.
■ مثال 3: اقفل العجلات الأمامية والخلفية بشكل فردي
طريقة لتأمين العجلات الأمامية والخلفية بشكل منفصل مع فصل السلسلة.
يمكن تعيين مفتاح في مكانين ، ويمكن الحصول على تأثير قفل مرتفع.
■ مثال 4: قفل يتطلب مسافة طويلة
عند قفل دراجة نارية منفصلة عن الهياكل مثل GroundAnchor ، فإن ربط السلسلة بخط مستقيم يتيح القفل باستخدام الطول.
■ مثال 5: اقفل دراجات نارية متعددة معًا
قفل الدراجات النارية المتعددة جنبا إلى جنب مع سلاسل متصلة "قفل صديق" تتوافق أيضا.
■ مثال 6: قفل دراجتين ناريتين بشكل فردي
سلسلة منفصلة وقفل اثنين من الدراجات النارية بشكل فردي.
يتم تزويد كل منها بقفل لتوفير قوة قفل عالية.
[قفل تكبل بقوة عميقة.]
قفل تكبل بتصميم أخدود عميق يمكنه قفل سلاسل متعددة في وقت واحد ويمكن استخدامه أيضًا كقرص قفل.
في حالة القفل ، هناك عدد قليل من الأجزاء المكشوفة من القيد ، ولا يمكن للقاطع الهيدروليكي اختراق التصميم.
تم تصميم الأصفاد بحيث لا يمكن فتحها حتى إذا تم قطع جزء واحد لأن هيكل القفل يعمل على كل من جزء الإدراج.
اقفل دوار القرص
على شكل حرف U يمكن استخدامه كقفل للقرص عن طريق إدخاله في قرص الدوار بسبب تصميم الأخدود العميق.
■ يقفل نهايات كل سلسلة دفعة واحدة
الكمية: 2pc Ring Terminal Ring، O-ring (حلقة دائرية) ، من خلال ما مجموعه أربع حلقات ، ودعم مختلف أساليب التعامل مع قفل وقفل سلسلة.
■ مرآة التشطيب
طلاء خارجي مطلي بالمرآة مغطى بسبائك الزنك ذهبي.
يوفر تأثيرًا مرئيًا قويًا وقويًا.
[مواصفات المنتج]
■ سلسلة الفولاذ عالية القوة
تستخدم السلسلة سلسلة فولاذية مربعة عالية القوة 9.5 ملم لا يمكن قطعها بسهولة.
من خلال تطبيق طلاء مسحوق أسود على سلسلة 150 سم ، يمكنك تمييز السلسلة بشكل مرئي.
■ أوبا سلينج
حلقة متصلة بجانب واحد من كل سلسلة (خاتم على شكل حرف O) من خلال تمرير جانب السلسلة إلى الحلقة ، يمكنك قفل العجلة حول جسم ChainSingle فقط وكذلك وظيفة توصيل السلسلة.
■ غير مطبوع
كم ، الذي يحمي الجسم من الخدوش التي تسببها سلسلة ، يستخدم غير PrintSpec.
في البيئات حيث يتعرض لدرجات حرارة عالية أو أشعة الشمس المباشرة ، يذوب سطح الطباعة لمنع التصاق الطلاء.
■ عملية اللحام المشترك
جميع الوصلات بين السلسلة الفولاذية و OPA Sling ملحومة لزيادة القوة وقمع استطالة السلسلة.
[قوة قفل إضافية مع قفل Earth]
أرض (الخرسانة) تثبيت StrongGroundAnchor بشكل دائم في [DKL513-BK] وقفل DoubleLoopStrongChain [DKL512-BK] إذا تم استخدامها معًا ، فيمكن اتخاذ تدابير أكثر قوة لمكافحة السرقة.
[Dog KingDesign مع مراعاة الجمع]
StrongGroundAnchor (DKL513-BK) أبعاد تكبل قفل DoubleLoopStrongChain (DKL512-BK) قدمت أوبا سلينج في (خاتم على شكل حرف O) وهي مصممة لتكون قادرة على الاتصال دون استخدام قفل من خلال ربط ChainOne Side إلى تكبل من الحجم الصغير.
درجة الحرية عالية ، ويمكن تنفيذ أقفال مختلفة اعتمادًا على الأفكار.
By separating it, it is easier to handle and opens up more possibilities for locking.
[unprecedented separation structure.When connected, it is 270cm long.]
Longer chain locks have a larger locking range.
In exchange for this effect, you sacrifice the ease of use when locking the door.
Double-loop strong chain locks are generally long chain locks with a separate structure, which not only improves operability but also supports various types of locking.
■Long design of 270cm in length.
270cm long design to lock the front and rear wheels of bikes at the same time and to lock multiple bikes at once.
The chain can be easily connected by passing the other chain through the opus ring (O-shaped ring) of one side chain.
■Easy to handle because it separates.
A single long chain lock is difficult to lock because of its length and weight.
The separation of the chain lock makes it easier to install on the bike and reduces the risk of interference with the wheel during operation.
■This product can also be used by itself.
Each separate chain is available in two lengths: 120cm and 150cm.
Also recommended as a separate chain lock for owners of two bikes, one sub and one main.
The chain of 150cm is colored black to the tip, so you can identify it.
[Separate type for a variety of locking methods.]
Chain locks for motorcycles are usually a single long chain that can be used to lock a wide range of items.
Because of its length, it is not only troublesome to handle through the wheel of the bike, but also has the risk of damaging the vehicle body by carelessness.
In addition, it is heavy, and it can be said that locking is hard work for the user who locks it frequently.
The double-loop strong chain lock consists of two separate chains of 150cm (black) and 120cm (silver), so that the front and rear wheels can be locked separately, contributing to the efficiency and reduction of workload.
It can also be used as a stand-alone chain for versatility.
■Example 1: Front and rear wheels are connected and locked (1)
A common locking method in which the front and rear wheels are locked around each other while the chain is connected.
For SS bikes and other bikes with a short wheelbase.
■Example 2: Connecting and locking the front and rear wheels (2)
Locking method with separate chains for the front and rear wheels, locked in the middle.
Suitable for bikes with long wheelbase such as cruisers.
■Example 3: Front and rear wheels locked individually
Locking the front and rear wheels separately with the chain separated.
The lock can be installed in two places, and the locking effect is high.
■Example 4: Locking that requires a long distance
In the case of locking a bike which is far away from a structure such as a ground anchor, the chain can be connected in a straight line to make the most of its length.
■Example 5: Locking multiple bikes at once
It is also possible to use a "friend lock" to lock several bikes together while the chain is connected.
■Example 6: Locking two bikes individually
Separate chain to lock the two bikes individually.
Each lock is equipped with a high locking force.
[High strength, deep groove shackle lock.]
A shackle lock with a deep groove design that can lock multiple chains at once and can also be used as a disc lock.
In the locked state, the shackle is designed to have a small exposed area so that hydraulic cutters cannot penetrate.
The shackle is designed in such a way that it cannot be unlocked even if one part of the shackle is cut off, because the locking mechanism works at both insertion points.
Locked to the disc rotor you buy
The deep groove design allows you to insert it into the disc rotor and use it as a disc lock.
■Lock the end of each chain at once
Can be used with two chain end rings and an O-ring (round ring), for a total of four rings, and can be used with a variety of chain locks and locking methods.
■Mirror finish
Mirror finish exterior covered with zinc alloy.
It gives a massive and robust visual effect.
[Product Features]
■High strength steel chain
The chain is made of high strength steel with a 9.5mm square cross section that cannot be easily cut.
The 150cm chain is powder coated in black to visually distinguish the chains.
■Opus Ring
The round ring (O-shaped ring) attached to one side of each chain allows the chain to pass through the ring to lock the wheel around the chain alone, and also functions to connect the chains.
■Non Printed Sleeve
The sleeve protects the body from scratches by the chain and is non-printed with the brand logo.
It prevents the paint from sticking to the printed surface by dissolving in the high temperature or direct sunlight environment.
■Joint weld treatment
All joints between the steel chain and the opus ring are welded.It increases the strength and reduces the chain elongation.
[Earth lock for added locking power.]
The Strong Ground Anchor [DKL513-BK], which is permanently installed on the ground (concrete), and the Double Loop Strong Chain Lock [DKL512-BK] can be used together for even more solid anti-theft measures.
[Docking design for use in conjunction with]
The dimensions of the shackle of the Strong Ground Anchor (DKL513-BK) are designed to be smaller than those of the opus ring (O-shaped ring) of the Double Loop Strong Chain Lock (DKL512-BK), so that one side of the chain can be connected without using the lock by catching on the shackle. One side of the chain is caught in the shackle, so that it can be connected without using a lock.
The lock can be locked in a variety of ways depending on your ideas.