[تصنيف الجهد]
12V العاصمة
[بحجم]
القطر الخارجي : W57 x H40 x D12.3mm (باستثناء نتوءات)
[محتويات المنتج]
جسم عداد الوقود x1pc.
حصريا ربط ربط x1pc.
كتيب التعليمات
ضمان
[تخصيص]
2 عرض الوضع المتبقي والمستخدم
يستخدم جسم مقياس الوقود DG-329.
يتم استخدام شاحنات الصهريج سعة 16 و 17 لتر عن طريق استبدال الإعدادات.
يتم تضمين جميع الأجزاء المطلوبة للتثبيت.
* يرجى ملاحظة أن مواصفات المنتج الخاص بي سيتم تغييرها لأسباب الشركة المصنعة.
* هذا المنتج مخصص فقط لمركبات حقن الوقود بجهد 12 فولت.
* لا يجب تركيبه على مركبات حاقنات مزدوجة. يمكن أن يكون أقل دقة بشكل ملحوظ عند تركيبه على مركبة أخرى غير حاقن واحد لكل أسطوانة.
* يرجى عدم الضغط على مفتاح SET في الوحدة الرئيسية وحدها لأكثر من ثانية واحدة. سيؤدي ذلك إلى إعادة تعيين بيانات استهلاك الوقود المسجلة وفقدانها.
* يجب تثبيته بشكل صحيح وفقًا لدليل التعليمات. قد يتسبب التركيب غير الصحيح في نشوب حريق أو فشل.
* يرجى ملاحظة أنه لا يمكن تحميل بروتيك المسؤولية عن أي أضرار مثل الفشل أو الحوادث الناجمة عن استخدام هذا المنتج.
* يرجى ملاحظة أنه لا يمكن تحميل بروتيك المسؤولية عن أي عملية إزالة أو تكاليف عامة أخرى يتم تكبدها أثناء الإصلاحات
* تخضع مواصفات ومظهر المنتج للتغيير دون إشعار مسبق لتحسين المنتج.
[Rated voltage]
・DC12V
[Size]
・Outer diameter: W57 x H40 x D12.3mm (excluding protruding parts)
[Set components]
・Fuel gauge unit x 1
・Special connection harness x 1
・Instruction Manual
[Specification]
・Two-mode display of remaining amount and amount used
・DG-329 is used fro the fuel gauge unit
・For 16 and 17 liter tank vehicles, the setting is changed
・All necessary parts for installation are included
*There may be changes in product specifications due to the manufacturer's reasons.
*This product is for 12V fuel injected vehicles only.
*Do not install on twin injector vehicles.The accuracy may be greatly reduced if the unit is installed in a vehicle other than those with one injector per cylinder.
*Do not press the SET switch of the main body alone for more than 1 second.The registered fuel consumption data will be reset and lost.
*Install the product correctly according to the instruction manual.Improper installation may result in fire or equipment damage.
*PROTEC is not responsible for any damage or accident caused by the use of this product.
*Protec is not responsible for any labor charges for removal or other expenses incurred during repair.
*The specifications and appearance of the product are subject to change for improvement.