[المواصفات]
Coat جل أبيض CoatFRP
[وشملت]
تركيب الترباس
·البندق
[بحجم]
・ حوالي 270 ملليمتر في العرض
・ ارتفاع حوالي 360mm
* يرجى ملاحظة أن مصابيح الضباب غير مضمنة في هذا المنتج.
* سيكون المنتج أمام الصندوق الأمامي. (لم يتم تضمين مجموعة منحدر على الجانب الخلفي من BOX)
* قد تسبب المنتجات خدوشًا / ضبابًا مجهرًا على سطح الجلكوت بسبب عملية التشكيل.
* للتثبيت ، من الضروري إزالة الصندوق الأمامي الأصلي ، وثقب الحفر ، ونقل القرن ، إلخ.
* قد تكون هناك فجوات أو خطوات طفيفة بين المنتج والجزء الخلفي من المربع الأصلي.
* سيتم إزالة المصباح الأصلي وقوس الضوء.
* نوصي أن ترتدي المنتج بعد كل اللوحة.
* الجانب الخلفي من المنتج هو الألياف الزجاجية الخاصة بمنتجات FRP "Thorn" هناك حالة تبرز. بالإضافة إلى ذلك ، قد يكون جزء الحافة حادًا. يرجى التعامل مع الرعاية بما فيه الكفاية.
* يرجى ملاحظة أنه قد لا يتم تثبيت هذا المنتج اعتمادا على حالة التركيب للأجزاء المخصصة الأخرى إلخ.
[Specification]
・White gel coat FRP
[Component]
・Mounting bolt
・Nut
[Size]
・Width: Approx. 270mm
・Height approx. 360mm
*Fog lamp is not included in this product.
*The product is on the front side of the front box.(Rear side of BOX, Lamp kit is not included)
*Due to the molding process, the gel coat surface of the product may have minute scratches and blemishes.
*Installation requires removal of the stock front box, drilling, and relocation of the horn.
*There may be a small gap or step between this product and the rear side of the stock box.
*The stock headlight and light bracket must be removed.
*It is recommended to use this product after painting the entire surface.
*The back side of the product may have protruding glass fiber "spikes" peculiar to FRP products.The edges may be sharp.Please handle with care.
*Please note that this product may not be installed depending on the installation condition of other custom parts.