بالطبع ، ذروة الحرية جذابة وكذلك تلميع مستو.
قرص كاشط للجنس الذهبي لطاحونة القرص 100 مم.
تستخدم أساسا لإزالة حبة اللحام ، إزالة BALI ، إزالة الصدأ ، وتلميع مستو.
[الميزة 1 · إظهار القوة في تلميع السطح]
يوضح السلطة أساسا في تلميع مستو.
يتميز هذا التلامس بكونه قويًا بشكل خاص في المسطحات الخفيفة مع كتل كتل الطحن.
[الميزة 2 · ارتفاع الحرية]
لأن القاعدة الخلفية صلبة ، فإن الحلاقة القوية ممكنة في حالة الضغط عليها.
يمكن استخدامه في حالة الله سبحانه وتعالى مثل قطرة الزاوية والقطع الكاشطة القوي وإزالة BALI للوجه النهائي.
[الميزة 3 · في برنامج ToRNADO Thunder الفريد]
مقارنة بالآلات العامة ، فإن TORNADO sander لديه عيب بسيط في النهاية.
يمكنك أيضا استخدامه هنا لخفيفة.
[ميزة 4 · على عجلة طحن زركونيا]
طحن عجلة القماش جلخ هو زركونيا.
إنها مادة صلبة للقطع الثقيل ومقاومة للقطع في الفولاذ المقاوم للصدأ.
[حول سرعة دوران طاحونة الأقراص]
سرعة منخفضة (سرعة منخفضة) عند استخدامها ، تصبح قوة الطرد المركزي صغيرة ، وبالتالي يصبح التلامس بين قرص التلميع وشغل الشغل ناعماً.
على وجه الخصوص ، فإن التأثير الثابت للقاعدة صغير. "ناعم" "هواء" يصبح شكل قطعة قماش التلميع سهل التوافق مع الكائن المراد صقله ، ويصبح من السهل تنفيذ عملية قطع التلميع على طول شكل السطح المنحني.
بالإضافة إلى ذلك ، من الممكن تقليل التآكل والأضرار والعض والإمساك بسبب تناثر قطعة قماش التلميع.
* حقيقة أنه من السهل أن تعمل بشكل موحد في وقت الانتهاء يؤدي أيضا إلى الحد من الصفر.
من ناحية أخرى ، في القطع الثقيلة ، تصبح سرعة القطع أبطأ نظرًا لوجود ضربة أضعف وانخفاض في كمية العمل بسبب انخفاض سرعة الدوران.
"مسطح" وخاصة "قص" نوصي باستخدام نوع دوران عام عالي السرعة.
[طاحونة بطيئة]
* من الشائع استخدام مطحنة الأسطوانات من نوع عزم الدوران عالية السرعة مع وظيفة تغيير السرعة ووحدة التحكم في السرعة.
[التوافق مع السرعة المنخفضة والسرعة العالية]
سرعة منخفضة <---> سرعة عالية
لينة / الهواء / شقة / قص
40/120/320
It is attractive not only for flat surface polishing but also for its high degree of freedom.
Abrasive discs for metal for 100mm disc grinders.
Mainly used for weld bead removal, deburring, rust removal and flat grinding.
[Feature 1 - Effective for flat surface polishing]
Mainly used for surface grinding.
It has a milder impact than a lump of whetstone and is especially strong in planing.
[Feature 2 - High degree of freedom]
Since the back base is solid, strong cutting is available by pressing against it.
It can be used for all kinds of applications such as corner removal, hard grinding and deburring of the end face.
[Feature 3 - Only with Tornado Thunder]
The Tornado Thunder has a small part on the edge that does not touch the base it, compared with the general one.
You can also use it to make it even milder.
[Feature 4 - Grindstone Zirconia]
The grinding wheel of the polishing cloth is zirconia.
It is hard and suitable for heavy cutting, and is a strong material for cutting stainless steel.
[About the speed of the disc grinder]
When used at low speed (low rotation speed), the centrifugal force is reduced and the contact between the grinding disc and the workpiece becomes softer.
This makes the shape of the abrasive cloth more familiar to the workpiece, especially in the "soft" and "air" types where the fixing influence of the base is small, and makes it easier to perform abrasive cutting along the shape of curved surfaces.
In addition, the wear and tear, damage, biting and snagging caused by scattering of abrasive cloth can be reduced.
*It is also easy to operate evenly when finishing, leading to a reduction in scratches.
On the other hand, in heavy-duty cutting, the cutting speed becomes slower due to weaker contact and lower workload caused by reduced rotation speed.
For "Flat" and especially "Cut", recommending the use of a general high-speed rotation type.
[slow grinder]
*It is common to use a disc grinder with variable speed function, low speed and high torque type and speed controller.
[compatibility with low and high speeds]
Low speed <--------> High speed
Soft / Air / Flat / Cut
40 / 120 / 320