[المواصفات]
الفولطية: 12 فولت تيار مستمر
· استهلاك الطاقة: 20 وات
درجة حرارة اللون: 6000 ك
・ استخدام الصمام: كري XLamp XP-L المصابيح
・ نوع الشركة المصنعة للجزء ينبعث منها ضوء: LB7-KN
・ 13-18 بي ام دبليو F700GS مخصصة الجانب العلوي المصباح LED BulbLoBeam مجموعة مخصصة
・ تثبيت KitBolt On لنوع السيارة فقط
・ نوع H7Single
・ تقرير التفتيش المجتمع مع
-Valve خارج عرض تحذير يمكن مجهزة سيرا
[الحذر]
* هذا المنتج ، تيار مباشر بقوة 12 فولت (DC) هو على وجه الحصر للناقص المشترك ، يرجى التأكد من الالتزام الصارم بالأسلاك بقوة 12 VDC.
* سيارات الإزاحة الصغيرة هناك العديد من التبادلات (AC) لا تعلقها على الإطلاق لأنها لا تتوافق مع سيارات نوع الإضاءة الأمامية.
* النقص الشائع يعني النوع الذي يكون فيه الجانب الطرفي من أسلاك ضوء الرأس شائعاً في جانب الحزم المرتفعة وجانب حزمة الشعاع ، ولا يتطابق مع المركبات ذات إضاءة الرأس المشتركة الإيجابية.
* بما أن هذا المنتج هو حصري للدراجات النارية ، فلا يمكن استخدامه للمركبات ذات الأربع عجلات.
* لا تضيء بالقرب من الورق أو القماش أو بالقرب من المواد القابلة للاشتعال لا تضيء أو تسبب تسخين غير طبيعي.بالإضافة إلى ذلك ، لا تضيء بالقرب من المواد القابلة للاشتعال مثل رذاذ قابل للاحتراق ، أرق الخ. والتهديد للقبض على النار يرجى القيام به.
* لا تعلق على المصباح في حالة مضاءة ، لأنها قد تسبب أعطال أو حروق.
* هذا المنتج مقاوم للماء ولكن ليس مقاوم للماء على الرغم من أنه مضاد للماء. يرجى القيام بمعاملة مقاومة للماء مع عامل السد. عن طريق التفاف الشريط الفينيل ، شريط لاصق النفس وما إلى ذلك. للمقرنة التي تخرج من وحدة تحكم. المياه مع الماء أكثر من اللازم يرجى تجنب.
* عند غسل السيارة بغسالة الضغط العالي ، من فضلك لا تضرب هذا المنتج مباشرة بغسل الضغط العالي.
* لا تسقط لمبة LED أو وحدة تحكم ، أو تعطي صدمة قوية ، وما إلى ذلك. لن يؤدي فقط إلى الإضرار ، أو تدهور الأداء ، أو تقصير العمر ، ولكن أيضًا يسبب الإصابة.
* تأكد من تطبيق الشحوم السيليكونية المقدمة لتجميع لمبات LED يرجى الرجوع إلى هذا الدليل للحصول على التفاصيل.
* لا تلمس رقاقة LED عندما يكون خارج أو مضاءة.
* لا تحجب مروحة التبريد ، يرجى التأكد من وجود مساحة كافية لتدفق الهواء في الجزء الخلفي من المروحة.
* مروحة التبريد المقاومة للماء لديها مواصفات الاتجاه في وقت التثبيت.يرجى التأكد من تثبيت مع ختم جولة الفضة التي تواجه الخارج.
* استخدم أقفال اللولب لمنع تفكيك الخيوط ، وإعادة تثبيتها بشكل دوري.
* يتطلب التثبيت معرفة ومهارة الخبراء ، يرجى القيام به في مصنع الصيانة المعين الخ. مع الميكانيكا الماهرة الخ
* يرجى التأكد من ضبط المحور البصري قبل الاستخدام.هناك إمكانية عرقلة رؤية المركبات المرتدة وإحداث حادث مروري.للمزيد من التفاصيل يرجى الرجوع إلى معايير السلامة لمركبات النقل البري.
* قد لا نتمكن من الحصول على ضمان من الشركة المصنعة للمركبة بسبب تركيب هذا المنتج.
* لا يمكننا تحمل أي مسؤولية عن الأضرار الناجمة عن استخدام هذا المنتج ، مثل عطل ، حادث ، وما إلى ذلك. لا يمكننا أن نتحمل أي مسؤولية عن رسوم الامتصاص والمصروفات المختلفة الأخرى التي تسببت في الإصلاح. من فضلك أعطني.
* إذا شعرت بأي شيء غير طبيعي أثناء التركيب أو أثناء الاستخدام ، يرجى الاتصال بالوكيل أو قسم خدمة Protech.
[حول وصف مطابقة فحص السيارات]
* يباع هذا المنتج كعنصر فحص المركبات ، ولكن هذا عن الحد الأقصى لشدة الضوء ودرجة حرارة اللون. (مصدر ضوء جديد) يرجى القيام بتعديل المحور البصري مع آلة الفحص المقابلة له. هذا لأنه يستخدم للمصابيح الأمامية بخلاف المصابيح الأمامية الأصلية بخلاف المصابيح الأمامية الأصلية مثل الأوساخ وتعفير عدسة الضوء بسبب سوء ضبط المحور البصري وتدهور العمر والخدوش وتقشير الجزء العاكس داخل جسم المصباح نحن لسنا مسؤولين عن أي عيوب في فحص المركبات ، وعيوب الصيانة.
[Specification]
・Rated voltage: DC12V
・Power consumption: 20W
・Color temperature: 6000k
・Use LED: CREE XLamp XP-L LEDs
・Manufacturer's model of the light emitting part: LB7-KN
・13-18 Dedicated kit for BMW F700GS LED headlight bulb Lo beam side
・Bolt-on installation of the kit for specific models
・H7 Single Type
・With inspection certificate
・Equipped with bulb-out warning indicator canceller
[Notes]
*This product is only for 12V DC Minus Common.Be sure to use DC12V as the power source for wiring.
*Please do not connect to the AC headlight, which is common in small displacement vehicles.
*Minus common refers to the type in which the negative side of the headlight wiring is common to both the Hi beam side and Lo beam side.Not compatible with vehicles with positive common headlights.
*This product is for motorcycles only, so cannot be used on four-wheeled vehicles.
*Do not cover with paper or cloth and do not light near flammable materials.Failure to do so may result in fire or abnormal heating.Also, do not light near flammable items such as flammable spray, thinner, etc. or items that may ignite.
*Do not install to the headlight with the light on.Failure to do so may result in malfunction or burns.
*This product is waterproof for daily life, but it is not completely waterproof.Wrap the coupler coming out of the controller unit with vinyl tape or self-bonding tape, or use caulking agent to waterproof it.Avoid wetting the product with more water than necessary.
*When washing a vehicle with a high pressure washer, please do not let the high pressure wash directly hit this product.
*Please do not drop the LED bulb or controller unit, or give it a strong shock.It not only causes breakage, deterioration of performance and shortening of service life, but also causes injury.
*Be sure to apply the included silicone grease when assembling the LED bulb.Please refer to this manual for details.
*Do not touch the LED chip when it is off or on.
*Do not cover up the waterproof cooling fan.Make sure that there is enough space behind the fan for the sucked air to flow.
*The waterproof cooling fan has a specific orientation for installation.Be sure to install with the silver round seal facing outward.
*Use a thread locker to prevent loosening of the threaded part.Periodic retightening is also recommended.
*Installation requires expertise and skill.Please have it done at a designated maintenance facility with skilled mechanics.
*Please adjust the optical axis before use.It may obstruct the view of oncoming vehicles and cause traffic accidents.
*PROTEC is not responsible for any damage or accident caused by the use of this product.Protec will not be responsible for any labor charges or other costs incurred during repair.
*If you feel any abnormality during installation or use, please contact your dealer or PROTEC service department.
After installing the product, be sure to adjust the optical axis using an inspection machine that is compatible with LED (new light source).PROTEC is not responsible for any dirt or clouding of the light lens, scratches, peeling of the reflector plating inside the light, or poor maintenance due to poor optical axis adjustment or age-related deterioration.