لون أسود
المادة: الجلود الاصطناعية
الحجم: 29 × 29 × 3 3.5 × العرض (cm)
القدرة: 9L
الموردة مع: غطاء المطر ، مجموعة قوس
جانب الجسم مع قوس
BodyBracket: 1
طوق (طويل وقصير) :1 كل
5 / 16-18X21 / 2 بوصة مسدس بولت: 2
غسالة فلات 8: 2
RPin: 1
الجانب الخلفي مع البند قوس
شنق قوس: 1
M6X15Button غطاء الترباس: 2
دبوس ثابت: 1
قفل الجوز M6Nylon: 2
lat6 فلات غسالة: 2
lat6 فلات غسالة (كبير) : 1
لوح المطاط: 2
* من المحتم أن يكون تدهور / تآكل المنتج بسبب الشيخوخة أو الاستخدام أمرًا لا مفر منه.
* أنا أفكر في المتانة بما فيه الكفاية ، ولكن هناك خطر من الكسر عند تطبيق عبء مفرط أو طريقة الاستخدام غير مناسب.
* حتى لو كان المنتج نفسه ، فهناك فروقات فردية في كيفية إدخال التجاعيد والشقوق ، وهناك شخصية في كل منها مثل التظليل / الظل من الظلال والظلال المتأصلة في ذلك الجلد.
* يرجى تفهم مسبقا أن هناك بعض الاختلافات في نسيج الجلد اعتمادا على وقت الإنتاج.
* سيتم تسليم الملحقات البقاء في الجانب الخلفي تعلق على الظهر.
* البقاء في الجانب الأيمن / البقاء في الجانب الأيسر على جانب السيارة هو منتج منفصل.
* تُباع ملحقات البقاء في الجانب الخلفي مع الجزء الخلفي المرفق.
* يمكن استخدام البقاء في الجانب الخلفي لتعديل وضع تثبيت اليمين أو اليسار.
Color: Black
Material: Synthetic Leather
Size: Height 29 x Width 33.5 x Depth 14 (cm)
Capacity: 9L
Included: Rain cover, Bracket Set
Body side bracket accessory
Main bracket: 1
Color (long and short): 1 Each
5 / 16-18 x 21 / 2 inch hex bolt: 2
Φ8 flat washers: 2
R Pin: 1
Back side bracket accessory
Hang bracket: 1
M6 x 15 Button Cap Bolt: 2
Fixed pin: 1
M6 nylon locknut: 2
Φ6 flat washers: 2
Φ6 flat washer (Large): 1
Rubber plate: 2
*Degradation and wear and tear of the product due to aging and use are inevitable.
*However, the product may be damaged if it is overloaded or not used properly.
*Even if it is the same product, there are individual differences in the way the wrinkles and cracks enter the leather, and the way the patterns appear, and there is individuality in each piece of clothing, such as the flaws and shades of color inherent in the leather.
*There may be a slight difference in the texture of the leather depending on the time of production.
*The back side bracket accessory will be delivered with the back attached.
*Bracket for right side and bracket for left side of the vehicle body are separate products.
*The back side bracket accessory is sold with the bracket attached to the back.
*The bracket on the back side can be changed to right or left by adjusting the mounting position.
*Except for XL1200CX, XR1200 and custom vehicles