[Smoothdrivesystem]
الكمية المثالية لطرازات السيارات: SmoothDriveSystem expand Set.
الفرقة العازل ، حقن ، صندوق نظافة الهواء ، التعليق ، إلخ.
إنه نظام يعمل على تحييد وتفريغ الشحنات الساكنة الساكنة والسوائل التي تجعلها ناعمة.
لا يعتبر SmoothDriveSystem يسمى TuningParts.
إنها الأجزاء التي تجلب المشكلة التي كان لدينا في الأصل في اتجاه الحل.
منذ إعلان شركة ألمنيوم تيوب ، يبدو أنه من المسلم به أن الكهرباء الساكنة تبدو إشكالية للمستخدمين العامين أيضًا ،
منذ أكثر من 30 عامًا ، كانت المنتجات الثابتة المتعلقة بالكهرباء منتجات متنوعة للمركبات ، ولكنها خرجت واختفت وتكرر.
الترباس البندق في SmoothDriveSystem هو التفريغ المحمول جوا من طرف برز GizaGiza (كورونا التفريغ) لإزالة الكهرباء الساكنة.
الكهرباء الساكنة هي حالة يتم فيها ترك الشحنة الموجبة أو الشحنة السالبة.
حالتها هي مادة "تحرك" إنها تحدث دائمًا في كل حالة وفي أي وقت.
الاحتكاك ، الدوران ، التدفق ، الدوران ، الفرق في درجات الحرارة ، ولكن معادلة فورية مع + - أو فقدانها بواسطة التأريض.
وهو فعال لإزالة الكهرباء الساكنة قدر الإمكان.
يمكنك إزالته عن طريق تحريك الكهرباء الساكنة ، ولكنه يؤثر على كل شيء في مسار الحركة هذا.
التعليق هو على طريق الكهرباء الساكنة ، وهناك احتمال أن تتأثر والحركة ستكون سيئة.
في نظام المدخول ، أصبحت مقاومة لإدخال الهواء الخارجي ، وتدفق ، وتدفق المحرك في المحرك.
يتم سحب ما يسمى ظاهرة Donzuki بواسطة الكهرباء الساكنة للمؤشر المشحون بخليط وقود الهواء ، وربما لا تستطيع دخول Smooth إلى المحرك.
في بعض الأماكن أفقد قوة الشفط ونستمر في السكتة حتى تصبح دونزوكي. إذا تخلصت من الكهرباء الساكنة للمؤشر وستخلط شيئًا فشيئًا مع سو ، سيكون دونزكي أقل.
Donzuki هو أيضا تأخر الوقت ، وهذا يعني أنه لا يوجد Donzuki يمكن أيضا تسريع من نقطة مبكرة.
القدرة على التسريع إلى السلس من أقرب نقطة ستصل إلى الهدف السرعة حتى إذا لم تتمكن من فتح أكسل أكثر من ذي قبل.
سيكون من الأسهل والأكثر أمانًا إذا تمكنت من الركض على نحو سلس ، وإذا كان فتحة Axel صغيرة أو أن وقت الفتح يتناقص فإنه سيزيد بشكل طبيعي والاقتصاد في استهلاك الوقود.
إذا كان بإمكانك التعجيل من أقرب وقت ، فإن الوقت سيرتفع أيضًا للسيارات الكهربائية للسيارات جيدًا للوقت سيكون عنصر كبير هذا العنصر من هذا الجزء.
إنه طوق العازل بولت
مجرد استبدال عصابة عازلة الأصلي بولت!
محركات الاحتراق الداخلي باستخدام المطاط لمؤشر مشحونة بالتأكيد.
من أجل الحاقن · المكربن ، تتراكم الكهرباء الساكنة على الجسم نفسه لمنع الوقود من النمو بشكل مثالي.
وطالما كانت حالة منظف الهواء وأنبوب الاستنشاق من البلاستيك ، فإن الإلهام مشحون ولا يمكن أن يستنشق بسلاسة.
التحريض السلس (شبكة سوداء القضاء على الكهرباء الساكنة) سوف إزالة الكهرباء الساكنة من القضية.
إذا لم تتمكن من تثبيت جزء Case ، فقم بتطبيق TwoWayCoat لمنع توليد الكهرباء الساكنة.
[Smooth drivetrain]
Smooth Drive Systems has developed the most suitable set for each model.
Insulator band, injection bolt, air cleaner box, suspension, etc
This system eliminates and discharges the static electricity and makes the fluid pass through smoothly.
Smooth Drivetrain is not considered as a tuning part.
It is a part that brings the original problem to a solution.
Since the announcement of Toyota's aluminum tape, the general public has come to recognize that static electricity is a problem,
For more than 30 years, there have been various static electricity-related products for vehicle, but they have been repeatedly released and disappeared.
The bolts and nuts included in the Smooth Drivetrain eliminate static electricity by aerial discharge (corona discharge) from the serrated protrusions on the tips.
Static electricity is a state in which there is an excess of either + charge or - charge.
That state always occurs in every situation when matter "moves".
Rubbing, spinning, flowing, bending, temperature difference, but it can be neutralized instantly by +- or grounding and disappear.
It is best to remove static electricity at the point where it is generated.
Removing static electricity can be done by moving it, but it will affect everything along its path.
The suspension is in the path of static electricity and may be affected, resulting in poor movement.
In the intake system, it resists the introduction and flow of outside air and the inflow of the air mixture into the engine.
The so-called "thump" is probably caused by the static electricity of the insulator pulling the air mixture and preventing it from entering the engine smoothly.
If the static electricity of the insulator is removed and the air mixture enters gradually, the sticking will be less.
Thump also leads to a time lag.The lack of thump also means that you can accelerate early on.
The ability to accelerate smoothly from an early stage means that you can reach your target speed without having to open the accelerator more than before.
If you can drive smoothly, it is easy and safe, and if you open the accelerator pedal less, or open it less time, fuel consumption will naturally increase.
The earlier you can accelerate, the better your time will be.This is one of the main reasons why electric motor vehicle have better times.
The insulator band bolts are used to slow down the power of the insulator
Just replace the original insulator band bolts!It is.
Internal combustion engines that use rubber insulators are always electrically charged.
As for injectors and carburetors, it prevents static electricity from accumulating on the body itself and preventing the fuel from blowing ideally.
As long as the air cleaner case and intake pipe are made of plastic, the intake air will be charged and will not be smooth.
Smooth Induction (black static dissipative mesh) removes static electricity from the case.
For the parts of the case that cannot be installed, apply Two Way Coat to reduce static electricity generation.