واحد والوحيد الاسلوب. لوحة كاملة BilletLicense حامل.
تم تصميمها وفقًا لكل طراز سيارة ، وتم تصميمها خصيصًا لعقد الرقم مع أفضل توازن ، تم تصميمه وتصنيعه من قبل شركتنا.
تم تصميم نمط OEM الكبير والحاجز الخلفي الطويل مع رؤية لوحة الترخيص وكل ضوء مرفوع ووفقًا للوائح.
من ناحية أخرى ، يصبح الحجم مفرطًا ولا يمكن استخدام تصميم جسم الجسم من الجسم الثمين.
يتطابق حامل لوحة ترخيص تصميم GILD مع كل جسم سيارة على النحو الأمثل واللوائح أيضًا [اللون] واضح.
سوف أقوم بإنتاج منظر خلفي أنيق مع حامل لوحة ألومنيوم مملوء بالكامل ، وهو ليس بعيدًا عن فكرة "جذب الحاجز" بدلاً من "إزالة الحاجز".
إنه هيكل بسيط يزيل فقط المصد الخلفي لـ OEM ويرتدي طقم.
إنها زاوية عدد تتطابق مع معايير السلامة في قانون مركبات النقل بالشاحنات ، لذا فهي المراسلات اليابانية لفحص المركبات.
الوامض ، أدرك مصباح الذيل تصميم بولت اون الكامل باستخدام OEM.
[البعد]
ألومنيوم البليت هو هيكل يمكن تحقيقه بحيث يتم تصميمه ليكون سهل التركيب مع ضمان صلابة كافية.
تمسكت أيضًا بترتيب لوحة ترخيص الضوء ، الوامض ، لوحة الترخيص حتى لا نضعف رؤية ووظيفة كل جزء.
صممت فقط لكي لا تحمل لوحة الترخيص ، المساعدين ، ولكن لتكمل جسم السيارة عندما ترتديه.
تم تصميم اللوحة الرئيسية لمنع الماء من الدخول إلى القلع وغزو الغبار قدر الإمكان ، وتم تصميمه من أجل التوصيل عند توصيله بجسم السيارة.
يمكنك تحديد نظام ألوان اللوحة المتسلسلة من الأسود والفضي.
[صناعة]
تصميم من التصميم ، وقطع كل جزء من قبل شركتنا.
يتم قطع كل قطع في مصنعها الخاص.ويؤدي جميع العمليات بما في ذلك شراء المواد ، المعالجة ، المعالجة السطحية في اليابان.
لوحة متسلسلة معالجة 10 مم مادة لوحة الألومنيوم.
قطع بحيث تكون خفيفة الوزن مع ضمان صلابة كافية.
وبالنظر إلى ترتيب المساعدين وزاوية لوحة الترخيص ، فإن هذا هو التصميم الوحيد الذي يتابع جمال الشكل الذي يولد من الجمال الوظيفي.
One and only style.Full billet license holder.
It is designed to hold the number in the best balance for each model, and is designed and produced by our company.
The stock large and long rear fender is designed to increase the visibility of the license plate and each light.
On the other hand, the size of the body becomes too large and the design of the body itself is not utilized.
GILD design's license plate holders are perfectly matched to each bike body.
This full billet aluminum license plate holder is the first of its kind and will give your bike a stylish rear view.
Simply remove the stock rear fender and install the kit.
The blinkers and taillights are designed to be completely bolt-on.
[dimension]
The structure is designed to be easy to install with sufficient rigidity, which can be realized by using billet aluminum.
In order not to spoil the visibility and function of each part, we paid attention to the arrangement of the number lights, blinkers and license plate.
It is designed not only to hold the license plate and auxiliary equipment, but also to enhance the vehicle body when installed.
The main plate is designed to prevent water and dust from entering into the cowl as much as possible, and it is also designed to handle the wiring when it is mounted on the bike.
The color scheme of the connecting plate can be selected from black and silver.
[Manufacture]
We design and cut each part by ourselves.
Each part is machined in our factory.All processes such as material procurement, processing and surface treatment are done in Japan.
The connecting plate is made of 10mm aluminum plate.
It is machined to be lightweight while maintaining sufficient rigidity.
It is a one-of-a-kind design that pursues the beauty of form born from the beauty of function, taking into consideration the placement of auxiliary equipment and the angle of the license plate.