لون أسود
عنصر KATANA الحصري
منتج حصري للسباق
* قبل الشراء ، أولاً وقبل كل شيء ، هل نظام قوابض السيارة طبيعي؟ "يجب عليك" الرجاء التأكيد.
* موصوف في دليل الخدمة "طبيعي طبيعي" الرجاء التحقق بعناية بعد التحقق مما إذا كانت الطاقة الكاملة لا تنزلق حتى في الحد الأقصى للتناوب في الحالة ، فهي ليست مادة منتج تزيف ما يحدث في حالتها الأصلية.
* أسباب الفشل في حالة غير قابلة للتنويع ، على سبيل المثال ، هناك العديد من العوامل مثل المساكن صعدت وعيب التخليص بسبب ارتداء من طول مجموعة المساكن ، الخ. على وجه الخصوص ، منذ المساكن وغيرها. عفا عليها الزمن في خط 750S ، الدراية أمر ضروري.
* بالإضافة إلى ذلك ، بما أن 750 ذراع مع تعديل المواصفة القياسية هو تعيين 3 مم ، حيث أن النظام الأصلي نفسه هو القدرة على الإعداد في النهاية ، فالكسر والانهيار شائعان بشكل خاص ، لذا يرجى تثبيت نظام المنتج هذا بإحكام بعد الإصلاح والتعديل. .
* للحصول على مجموعة FCC من القابض ، فإن التكنولوجيا والخبرة مطلوبة من أجل التثبيت.لذلك لا غنى أيضًا عن وضع توتر الزنبرك خاصة بالنسبة إلى GSX 750S "يجب عليك" الرجاء طلب البناء للميكانيكي المحترف مع خبرات وفيرة.
Color: Black
Exclusive for Katana
Race-specific parts
*Before you buy
Before purchasing, please be sure to check that your bike's clutch system is in good working order.
Please check the "stock" condition as described in the service manual to make sure that it does not slip even at full power and maximum RPM.
This is not a product that cheats on something that is in trouble in stock condition.
There are a wide variety of causes for the failure to cut, for example, poor clearance due to housing bumps or worn housing set lengths.
Especially for the 750S and 1100 series, the housing and other parts are no longer available, so professional know-how is required for repair.
The standard adjustment of the 750 lever has 3mm of play at the tip, and the stock system itself is at the very limit of its setting capacity, so please install our system after a thorough repair and adjustment.
*Please always have an experienced professional mechanic perform the installation.
*All parts handled are for racing use only.
*There may be changes in product specifications due to the manufacturer's reasons.