قوة عالية ، صلابة عالية جميع الفولاذ درابزين
[العنصر المكتسب]
الحاجز الأمامي مصنوع من قبل CHUCKBOX الذي يقوم بتصنيع العديد من أجزاء مخصصة عالية الجودة من نمط SRCafe المتسابق مع اليدوية.
بالمقارنة مع درابزين درابزين قصير / من النوع الثاني ، تتميز درابزين أمامية بتصميم سيارة إيطالي ناعم.
قسم الحوامل مصنوع يدوياً باستخدام أنبوب فولاذي صلب مصنوع من الفولاذ المقاوم للصدأ بسمك 2.0 مم و 10 wall.
انها بسيطة وجميلة وصنع رائعة.
الجزء لوحة البقاء هو 3.0mm. في حالة SR ، طالما أن أرجل القوس طويلة ، فإن الثقب الطويل لثقب بولت لا يتم اعتماده ويتم تأمين القوة عن طريق فتح ثقب دائري 9.0..
من خلال معالجة سماكة الجدار الأنابيب غير الملحومة ولوحة المقبض اليدوي في شكل القوس ، تم تحسين الصلابة الالتوائية في الشوكة الأمامية بشكل ملحوظ عند مقارنتها بشظية اللوح المسطح المشترك.
جسم الحاجز ، الكمية: زوج (لليسار ولليمين) لدينا ضلع فعال من حيث السلامة في الداخل ، ونحن نوفر قوة الجسم مع القوس العميق.
تتبنى الترباس مسامير ملولبة بسمك 6 مم لإيقاف جسم الحاجز والقوس لضمان متانة فائقة ، وضع غسالة مسطحة صعودا وهبوطا ، UNUT (رخوة البندق) المراسلات إلى تطور هو الكمال.
لوحة توقف FenderBody وقوس اللحام 3.0mm سميكة شقة في جميع أنحاء محيط ArchPipe.
انها تميل إلى أن تكون في نوع الإنتاج الضخم ، والحد من التكلفة لا توجد وسيلة لجعله بأي شكل من الأشكال.
مؤدب للغاية مع ZipperBox اليدوية.
High strength, high rigidity all stainless steel fender
[Back-order item]
Front fender made by CHUCKBOX which is handmade many high quality custom parts for SR cafe racer style.
Compared to the Short Fender / Type II Fender, this front fender features a softer Italian vehicle-like design.
The bracket part is made of 2.0mm thick 10Φ stainless steel pipe and hand-bent by hand.
It is simple, beautiful and bold.
The bracket plate is 3.0mm and the bolt holes are 9.0Φ round holes to secure the strength because the bracket legs are longer on SR.
The thick stainless steel pipe is hand-bent into an arch shape, and the treatment of the plate section greatly improves the torsional rigidity of the front fork when compared to a standard flat bracket fender.
The fender body has ribs on the inside of the right and left sides for safety, and the deep arches give strength to the body.
The bolts that hold the fender body and brackets together are 6mm cap bolts for extra durability, with flat washers on the top and bottom and U-nuts (anti-loosening nuts) for perfect torsion resistance.
The plate that holds the fender body and the bracket is 3.0mm thick flat welded to the arch pipe all around.
There is no cost-cutting method, which is common in mass production.
Handmade by Chuck Box and very carefully.