[XTRIG الثلاثي المشبك]
بين أوروبا التي هي موطن موتوكروس ، ألمانيا التي ترسل منتجات عالية الجودة إلى العالم على وجه الخصوص.
يتم إنتاج المشبك الثلاثي X-TRIG من FACTORY أن ألمانيا بالقرب من ميونيخ.
بالإضافة إلى اعتمادها من قبل كاوازاكي FACTORYTeam في بطولة العالم Motocross وهو أعلى سباق موتوكروس في العالم ، المشبك X-TRIGTriple الذي تبنته العديد من الفرق الشهيرة في جميع أنحاء العالم.
يتم تصنيع جميع العمليات في إطار مراقبة الجودة العالية داخل مصنعنا الخاص في ألمانيا FOROR JAPAN MODEL.
مشابك ثلاثية الأطراف قوية وخفيفة تمامًا تمامًا للاتصال بـ FACTORYParts gem.
[الراقية endTriple المشبك]
الشد المسبق للواجهة الأمامية والشعور الأمثل للصلابة مسترشدين بتقنية التصميم العالية والتشغيل الدقيق العالي.
نتيجة لذلك ، يمكن أن يشعر رايدر بالمعلومات المنقولة إلى الإطارات الأمامية في خطي.
يتذكر هذا الشعور الوهم كما لو كان يستخدم شوكة الجبهة التي تمت ترقيتها.
XTRIG الثلاثي المشبك لا يوجه الجمال فقط ، والأداء الأمامي fork إلى الحد الأقصى لحد كبير.
يتم حساب XTRIG Triple المشبك بواسطة الكمبيوتر مع كل شوكة مثبتة ومصممة على الصلابة المثلى.
بالإضافة إلى ذلك ، يتم تسليم جميع المشابك الثلاثية مع المعالجة بأكسيد FACTORYStyle التي تتميز بالتسامح العالي.
[الصورة 2]
اعتماد X-CLAMPSystem الذي يمكنه ضبط إزاحة Fork بسهولة.
في نظام صنع الحقبة هذا مع براءة اختراع XTRIG ، لا يدور عمود الجذع حتى في Hard Riding ، ويفتخر بالسلامة العالية.
في الجزء العلوي من المشبك ، يتم ختم المؤشر الذي يمكن بسهولة التحقق من قيمة الإزاحة الحالية.
[صورة 3]
يمكن اختيار Mount Handle Mount من PHDSMount و Mount Rigid.
[صورة 4]
الكمية: الدقة شوكة تشكيله تصاعد الدقة توقف مع 2 قطعة SPECIAL KnifeBolt.
[صورة 5]
تم تصميم ClampingSlot بحيث يتم تثبيت الشوكة بشكل موثوق به حتى مع "Hard Riding" وعدم إضعاف قابلية تشغيل الشوكة.
[صورة 6]
معدات التوجيه.
[صورة 7]
من خلال طريقة البناء الدقيقة ، يتم اشتقاق بدقة من محاذاة أنبوب شوكة و المشبك.
[صورة 8]
جذع التوجيه يعتمد الصلابة المثلى وفقا للنموذج.
[الصورة 9]
يمكن اختيار Mount Handle Mount من PHDSMount و Mount Rigid.
[XTRIG Triple Clamps]
In Europe, the home of motocross, Germany has been producing high quality products.
The X-TRIG triple clamps are produced in a factory near Munich, Germany.
The X-TRIG Triple Clamp is used by the Kawasaki Factory Team in the world's premier motocross race, the Motocross World Championship, and by many other famous teams around the world.
The entire process is manufactured in our own factory in Germany under high quality control.
Robust and light, the Triple Clamp is a true gem of a factory part.
[High End Triple Clamps]
Precise alignment and optimum stiffness of the front fork guided by high design technology and high precision machining.
As a result, the rider can feel the information transmitted to the front tire in a linear fashion.
The sensation is almost as if you were using an upgraded front fork.
The XTRIG Triple Clamp is not only aesthetically pleasing, but also maximizes the performance of the front forks.
XTRIG triple clamps are calculated by computer with each fork installed and designed for optimum hardness.
In addition, all triple clamps are delivered with a highly resistant factory-style anodized finish.
[Image 2]
The X-CLAMP system allows for easy adjustment of the fork offset.
This revolutionary system patented by XTRIG does not allow the stem shaft to rotate even when riding hard and boasts a high level of safety.
An indicator is engraved on the top of the clamp to easily check the current offset value.
[Image 3]
Handlebar mount is selectable between PHDS mount and rigid mount.
[Image 4]
Precision machined fork mounts with two special bolts.
[Image 5]
The clamping slots are designed to clamp the fork securely even in hard riding conditions without compromising fork operation.
[Image 6]
Steering stem bearings are standard equipment.
[Image 7]
The high-precision construction method leads to accurate alignment of the fork tubes and clamps.
[Image 8]
The hardness of the steering stem is optimized according to the type of vehicle.
[Image 9]
Handlebar mount is selectable between PHDS mount and rigid mount.