[جزء من مكونات]
1. قوس مصباح الضباب
2. بولت زر الرأس
3.Washer
4.Grommet
5. اللون المزجج
6.Spacer
7.Nut
8. رئيس المقبس بولت
9.Color
[مواصفات مصباح الضباب]
أقصى قدر من الإضاءة : 4000cd
درجة حرارة اللون : 6400K
تقدير استهلاك الطاقة : 8W (حاسب شخصي 1.)
الاستهلاك الحالي : ما يقرب من 1A / 1-مركبة
رجل ساعة : 0.5H (في حالة مصباح والسناد هي التي شنت في نفس الوقت)
* يرجى إصلاحها بحيث لا تقع المركبة في مكان مسطح وتبدأ العمل.
* يرجى إزالة محطة الطرح للبطارية قبل العمل.
* هو الحد الأقصى 2A للملحقات الكهربائية التي يمكن إرفاقها بوحدة التزويد بالطاقة الجانبية الرئيسية للوحدة.
* يرجى العمل مع الحذر التالي لمنع تلف الأسلاك.
يرجى الحرص على عدم الانحناء أو الأسلاك بحيث لا يتم اكتشافها في أجزاء أخرى.
يرجى عدم التوجيه بالقرب من أجزاء درجات الحرارة المرتفعة.
يرجى التحقق ما إذا كان يتم سحب الأسلاك عند قطع المقود على طول الطريق إلى اليسار واليمين.
* من فضلك لا تبرز شوكة الجبهة. لديه خطر التداخل بين مصباح الضباب و المصد الأمامي.
* يرجى التأكد من عدم وجود رخاوة وارتخاء في كل جزء قبل ركوب.
* استخدم منظفًا محايدًا وشطفه بقطعة قماش ناعمة أو إسفنجة لتنظيف مجموعة مصابيح الضباب. يرجى مسح جيدا الرطوبة بقطعة قماش ناعمة.
* يرجى عدم وضع الماء مباشرة على آلة غسيل السيارات ذات الضغط العالي.
[Component parts]
1.Fog lamp bracket
2. Bolt button head
3. Washer
4. Grommet
5. collar with brim
6. Spacer
7. nut
8. Socket head bolt
9. color
[Fog lamp spec.]
Maximum illumination: 4000cd
Color Temperature: 6400K
Rated power consumption: 8W (1pc)
Current consumption: Approx. 1A per unit
Man-hours: 0.5h (when the lamp and bracket are installed at the same time)
*Secure the motorcycle on a flat surface to prevent it from falling before starting work.
*Remove the negative terminal of the battery before working.
*The maximum electrical accessory that can be attached to the main accessory power supply is 2A.
*To prevent damage to the wiring, pay attention to the following.
・Be careful not to bend the wires or get them caught in other parts.
・Do not route near parts that become high temperature.
・Check that the wiring is not pulled when the steering wheel is turned fully left or right.
*Do not stick out the front forks.The fog lamp may interfere with the front fender.
*Before riding, make sure that there is no looseness or rattling in any part.
*To clean the fog lamp kit, use a mild detergent and wash it with water using a soft cloth or sponge.After washing the motorcycle, wipe off the water well with a soft cloth.
*Do not direct water from high pressure bike wash machine.