[عدد قطع الشركة المصنعة] 907-936-437-000
باستخدام مواد مضادة للحريق
دون توب التماس
[مواد]
فلاشات ضد الاشتعال (فضة) : Teijin Tetoron 250 استخدام منكر الغزول / معالجة بالفرشاة بولي يوريثين عالي التحمل للخدمة الشاقة نسيج سهل التركيب مصنوع من مثبطات اللهب للألمنيوم / معالجات مقاومة للرطوبة من الصلب المعزول ومقاوم للفلور ومقاوم للاحتكاك / بوليستر 100٪ / مادة مقاومة للحريق من اليابان
الحرائق (أزرق) : مزيل توقف خاص عالية الجودة صياغة مثبطات اللهب البلاستيك / نوع الفلور معالجة المياه طارد W معطف المياه / البوليستر 100٪ / اليابان مواد رابطة الموثق النار شهادة
تعزيز (برتقالة سوداء) : عززت القماش التي تحتوي على PVC معطف
* هناك حالات قد لا يتوافق معها حسب التركيب الاختياري.
* يحصل نظام العادم والمحرك على درجة حرارة عالية على الفور بعد ركوبه. يرجى استخدامه بعد أن تبرد بشكل كاف لأن ذلك قد يتسبب في ذوبان غطاء دراجة نارية.
* إنه مقاوم للماء للقماش ، وقد خضع خيط الخياطة إلى معالجة طاردة للماء ، ولكن الجسم قد يصبح رطبًا حسب هطول الأمطار لأنه غير مقاوم للماء تمامًا.
* قد يكون الزجاج الأمامي من مادة PVC مشوه حراريًا. يرجى الامتناع عن استخدام تحت درجة حرارة عالية.
* هناك خطر من أن الرياح ستدخل في غطاء دراجة نارية أثناء الرياح القوية. يرجى السيطرة بما فيه الكفاية بما في ذلك الوقاية من السقوط.
* هناك حالات قد لا تغطي السطح الملامس للإطار بسبب شكل جسم المركبة.
* يرجى الحرص على عدم حرق مع حرارة الاحتكاك عند سحب الحبل.
* يرجى توخي الحذر والقيام بتفتيش متكرر لأن هناك خطر من خدش جسم السيارة في حالة التمسك بالرمل والغبار على البطانة.
* هناك حالات قد لا يتوافق معها حسب التركيب الاختياري.
* هذا المنتج هو النوع الذي يضع المقود على اليسار من خلال تغطيته.
[Manufacturer's Part Number] 907-936-437-000
Use of flameproof materials
No top seam
[Material]
・Flameproof raised fabric (silver)Teijin Tetoron 250 denier yarn / Raised thick plain weave fabric with special high-grade urethane resin aluminum fire retardant / Fluorine-based hard W coat water repellent finish and antistatic treatment / 100% polyester / Japan Fire Retardant Association certified material
・Flameproof (blue)Ripstop fabric with special high-grade urethane resin fire retardant / Fluorine-based hard W-coat water-repellent treatment / 100% polyester / Japan Fire Retardant Association certified material
・Reinforcement (black / orange): PVC coated with reinforced fabric
*This product may not be compatible with some installation options.
*The engine and exhaust are hot immediately after driving.Please use it after it cools down sufficiently because the motorcycle cover may melt.
*The fabric is waterproof and the sewing thread is water-repellent, but it is not completely waterproof, so the vehicle body may get wet depending on the amount of rain.
*Vinyl chloride windshield may be thermally deformed.Do not use this product in high temperature.
*In high winds, the wind may penetrate into the bike cover.Take sufficient care of the equipment, including the prevention of this product from falling over.
*It may not cover the ground surface of the tire depending on the shape of the vehicle.
*When pulling the cord, be careful not to burn yourself due to frictional heat.
*Since sand, dust adhering to the lining may scratch the bike body, please inspect and care for the lining frequently.
*This product may not be compatible with some installation options.
*This product is designed to be put on by turning the handle to the left.