شكل لمبة : H11 / HB3 (9005) / HB3 (9005)
حجم الشبح اختبأ : 63 × 50 × 21 ملم
تصنيف جهد الدخل : DC8V-16V
استهلاك الطاقة : 35W
الحد الأقصى الحالي : 4.8a
تيار عادي : 3.3A
استخدم درجة الحرارة المسموح بها : -40-50-درجة
الجهد الأقصى الأولي : 23000V
Ballast Life Guideline : 2500-3000 ساعة
لمبة الحياة المبدأ التوجيهي : 3200 ساعة
طريقة إضاءة المصباح : طريقة العاصمة
لمبة الضوء الجريان : 3200LM (لومينز)
ضمان المنتج : 1 سنة
[محتويات المنتج]
عدة (حاسب شخصي 1.)
كتيب التعليمات
* يرجى التأكد من اختبار الإضاءة مع بطارية الخ. قبل تركيب جسم السيارة. (تتم جميع اختبارات المنتج قبل الشحن.)
* يرجى التحقق من أن وظيفة وقدرة بطارية مركبة التثبيت كافية. قد لا تكون مضاءة بشكل صحيح في بطارية متدهورة أو سيارة ذات قدر منخفض من توليد الطاقة.
* يرجى عدم استخدام التيار المتردد لأن هذا المنتج يستخدم DC الصابورة.
* قد يؤثر على المكونات الكهربائية الأخرى (متر / وحدة المعالجة المركزية / راديو) بسبب طبيعة HID ، قد يسبب العقبات. يرجى ملاحظة مكان التثبيت الخ
* مراسلة المركبة هي التأكيد مع شكل المصباح إلى الأخير. انها ليست على تصميم الترباس الكامل. يرجى التأكد من تركيب ومكان الصابورة وغيرها في تجهيز الخ في السيارة الحالية.
* للحصول على معلومات المطابقة يرجى الرجوع إلى موقع الشركة المصنعة والحكم على الشكل والعدد اللازم والشراء.
* يرجى التحقق مما إذا كان لمبة H4 ذات الشعاع العالي على أو ليس منخفضًا. هناك إمكانية H4H (شعاع واحد عالي).
* يوصى باستخدامه مع طقم التتابع الأمامي الاختياري.
Valve shape: H11 / HB3 (9005) / HB3 (9005)
Stealth HID Size: 63 x 50 x 21mm
Input Voltage Rating: DC8V-16V
Power consumption: 35W
Maximum current: 4.8A
Normal current: 3.3A
Operating Temperature: -40°C to 50°C
Initial maximum voltage: 23000V
Life estimate of ballast: 2500-3000 hours
Approximate valve life: 3200 hours
Bulb lighting method: DC method
Bulb luminous flux: 3200LM (Lumen)
one year
[Set components]
・1 kit
・Instruction Manual
*Always test the lighting with a battery before installing on the vehicle.(All products are tested before shipment.)
*Please check that the battery function and the capacity of the vehicle to be installed is sufficient.The light may not work properly with a depleted battery or a vehicle with low power generation.
*This product uses a DC ballast, so do not apply AC voltage to it.
*Due to the nature of HID, it may affect other electrical components (meter, cpu, radio).Please pay attention to the installation location.
*Compatibility is only confirmed by the valve shape.It is not a complete bolt-on design.Please confirm the installation of the ballast with your vehicle.
*Please refer to the manufacturer's website for compatibility information to determine the shape and quantity required.
*Check whether H4 bulb of high beam is lit or not as it is in low.There is a possibility that the bulb fitment is H4H (single high beam).
*Recommended to use with Headlight Relay Kit (sold separately).