السرعة القصوى (المعينة من قبل دايتونا) : 12.000rpm (في حالة القابض الجانبي الأساسي ، 10.000 دورة في الدقيقة)
منحنى تركيب الجزء الحجم (جانب الرأس) : Pitch 45mm، Intake Port System Φ24
المكربن الموصى بها : PC20 / PE24
يمكن تركيب PE28 / 26 و CR-MINI و VM26 و YD28 / 24.
أقصى سرعة دوران محددة (المعينة من قبل دايتونا) 12.000rpm (في حالة القابض الجانبي الأساسي ، 10.000 دورة في الدقيقة)
* يزيد الاهتزازات وصوت المحرك مع تحطيم.
* يرجى تثبيت مبرد الزيت ومقياس درجة حرارة الزيت وإدارة درجة حرارة الزيت عند تركيب هذا المنتج.
* تشغيل مستمر في درجة حرارة عالية (أكثر من 100 درجة) قد يتلف المحرك.
* يتطلب تركيب أجزاء متزامنة (عززت القابض ، ضخ النفط ، وسلسلة عمود الحدبات) بشكل منفصل.
* يتطلب استبدال نظام كاربوريتر ونظام العادم من أجل إظهار الأداء المطلوب.
* الرجاء استخدام وقود الأوكتان العالي لضغط عالي.
* يتطلب الجمع مع أجزاء التركيب المتزامنة التالية لأنه قد تم زيادة الطاقة. قد لا يتمكن المحرك من تحمل الزيادة في الطاقة وقد يتلف المحرك عند استخدام الأجزاء التالية كأجزاء OEM.
• تركيب أجزاء في وقت واحد
الجانب الأساسي عززت 3 قرص مخلب عدة (95634)
ضخ النفط الضخم (74670)
عززت عمود الحدبات سلسلة (77415)
Maximum RPM (Daytona Specifications): 12.000rpm.(10.000 rpm for the primary clutch)
Manifold mounting dimensions (head side): Pitch 45mm, Intake port system Φ24
Recommended carburetoruretor: PC20 / PE24.
Fits PE28 / 26, CR-MINI, VM26, YD28 / 24
Maximum specified speed (Daytona specification) 12.000 rpm.(10.000 rpm for the primary clutch)
*Increases vibration and engine noise with increased bore.
*When installing this product, please install an oil cooler and an oil temperature gauge to control the oil temperature.
*Continuous running at high temperatures (over 100°C) may damage the engine.
*You will need to install the following parts (reinforced clutch, reinforced oil pump, reinforced cam chain).
*The carburetor and exhaust must be replaced to achieve the specified performance.
*Due to high compression, use high-octane gasoline.
*Because the power is increased, it is necessary to combine with the following simultaneous installation parts.If the following parts are used as stock parts, the engine may not be able to withstand the increase in power and may be damaged.
■Parts to be installed at the same time
Primary side reinforced 3 disc clutch kit (95634)
mega oil pump type2 (74670)
Reinforced cam chain (77415)