الركائز المطلوبة للتركيب · مجموعة كاملة مع مسامير.
علاوة على ذلك ، الامتياز المحدود المربع الخلفي فقط مع إرفاق المبيعات.
■ الناقل الخلفي ل 4 نماذج مشتركة.
تحتوي كل من YZF-R25 و YZF-R3 و MT-25 و MT-03 من Yamaha على محرك وإطار مشتركين. على الرغم من اختلاف تكوين الجسم قليلاً ، فقد طورنا ناقل خلفي يمكن تعديله وتثبيته على 4 نماذج سيارات.
MT-25 بعد صورة YZF-R25 و STREETFIGHTER التي اعتمدت القلنسوة والتصميم تذكرنا بـ SUPER SPORTS 750. كلتا المركبات هما Slim ، Sharp Image ودراجة نارية بخفة الوزن وجاذبية الأداء القوية.
الناقل الخلفي هو جزء عملي ، لكنني صممه قدر الإمكان لعدم تدمير الصورة الحادة.
■ صممت على أنها شارب ممكن مع تأمين مساحة الركاب.
في البداية حاولت استخدام إطار الناقل الخلفي حتى SeatLimit حتى لا تدمر الصورة الضيقة مع Sharp. أصبح تصميم يهدف ، ولكن عندما حاولت الجلوس على ركاب حصلت مكتظة.
لذا صممته بشكل أوسع قليلاً من أول عنصر عينة بحيث يستطيع الذكر الجيد الذي يجلس على مقعد الراكب أن يتحمل تكاليفه. نحن الانتهاء من ضيق دون التضحية راحة الركاب.
■ الحد الأقصى لسعة التحميل الكبيرة 5 كجم. نحن نعزز في كل مكان.
في الآونة الأخيرة أصبح الأمر أكثر شيوعًا بالنسبة للسيارات التي تقوم بتصوير SUPER SPORTS 750 إلى حامل خلفي خلفي وخلفي مع Set. نظرًا لأن بعض المربعات الخلفية ذات الحجم الكبير تزن حوالي 5 كجم ، يتم تطبيق التعزيز على كل جزء ، ويتم تعيين الحد الأقصى لمبلغ التحميل الكبير إلى 5 كجم.
مكان التقوية يتم وضع المكان في جزء الإطار حيث يتم تركيب حامل الناقل الخلفي ويتم وضع التعزيز أيضًا في الجزء العلوي من الجسم.
■ شكل الوراثة الذي يؤكد على التطبيق العملي والتصميم.
عند تركيب الصندوق الخلفي ، قد يتم إغلاق الغطاء بدون إذن إذا كان أفقياً عند فتح الغطاء ،. لذلك قررنا جعل شكل جسم الناقل الخلفي في المؤخرة. تم تصميم الزاوية لزاوية الذيل حتى يكون لديها إحساس بالوحدة.
التثبيت هو MT-25 / 03 يزيل شريط Grab ويقوم بتثبيته. YZF-R25 / 3 مطلوب لحفر جزء من طارة الذيل لكن تم تصميمه بحيث يكون حفر الطرب هو أصغر حد. كما يأتي بنموذج ورق بحيث يسهل فهم موضع الحفر.
Full set with base and screws required for installation.
In addition, the set comes with a limited edition rear box inner.
■The rear carrier for the same four models is available.
Yamaha's YZF-R25 and YZF-R3, MT-25 and MT-03 each share the same engine and frame.Although the vehicle configuration is slightly different, World Walk has developed a rear carrier that can be adjusted to fit four different models.
The YZF-R25 has a cowling and design reminiscent of supersports, while the MT-25 follows the image of a street-fighter.Both bikes have a slim, sharp image and are lightweight with powerful performance.
The rear rack is a practical part, but World Walk designed it not to destroy the sharp image as much as possible.
■Designed to be as sharp as possible while retaining space for the passenger.
In order to keep the sharp and tight image of the bike, the frame of the rear rack was brought up to the very edge of the seat.The design of the vehicle is as World Walk wanted, but it is too tight for the passenger to sit on.
The passenger seat was designed to be slightly wider than the first sample to allow room for a larger man to sit in the passenger seat.It is a tight fit without sacrificing passenger comfort.
■Maximum loading capacity is 5kg.World Walk is reinforcing every part of it.
Recently, it has become common to install a rear carrier and a rear box as a set, even for super sports inspired vehicles.Some of the larger rear boxes weigh about 5kg, so I reinforced each part of the box and set the maximum load capacity to 5kg.
The reinforcement plate is placed on the frame where the rear carrier is installed, and also on the legs of the main body.
■The shape of the buttocks is designed for practicality and design.
When the rear box is installed, the lid may close by itself if it is horizontal or raised forward when the lid is opened.This is why the rear rack is designed to be raised backwards.The angle of the tail cowl is the same as the angle of the tail cowl, so the design has a sense of unity.
To install, remove the grab bar from MT-25 / 03.YZF-R25 / 3 requires drilling of some parts of the tail cowl, but World Walk has designed the cowl so that drilling of the cowl is minimized.A paper pattern is also included to help you know where to drill the holes.