● الناقل الخلفي لـ 400 ريال مع اكتمال العديد من الاهتزازات.
يتميز محرك 400 سي سي ذو الأسطوانة الواحدة 400 ريال سعودي بأن التذبذب كبير بشكل كبير مقارنة بمحرك ثنائي الأسطوانات المتوازي المشهور حديثًا وما شابه ذلك.
بسبب هذا الإهتزاز ، تشقّ لوحة الترخيص من الجزء بولت ، وبولت من الأجزاء المرفقة في وقت لاحق من السهل أن تخفف.
على الرغم من أن تصميم الجسم الأساسي البالغ 400 ريال لم يتغير منذ عام 1978 ، إلا أن Raraku يتشقق أو ينكسر لأن التلف الناتج عن الاهتزاز الفريد هو كبير نظرًا لأن الناقل الخلفي الفريد لا يتم بيعه أيضًا كبيرًا كبيرًا في السنوات الماضية كان هناك تاريخ أن بيع المصنّع كان أيضًا سحب.
هناك 20 طراز من الناقل الخلفي الذي طورته WorldWalk حتى الآن.
أنا حشدت التجربة حتى الآن وقدمت "400 ريال للناقل الخلفي يصعب كسره".
● تم تبني حامل المطاط كجزء التثبيت حيث يتم تطبيق الحمل بسهولة.
اعتمد بولت طريقة المطاط جبل الذي يسند المطاط في الجزء لإصلاح مباشرة مع جسم السيارة.
بالنظر إلى 400 ريال مع الكثير من الأميال ، قد ترى السيارات التي لديها تشققات في جزء بولت من الرقم.
بما أن الجزء الثابت من بولت يخضع للتحميل ، يتم تضمين الكراك في لوحة الترخيص الرقيقة.
تم تصميم الناقل الخلفي للمسار العالمي SR 400 لتركيب المطاط في الجزء الثابت مع جسم السيارة.
هو تصميم لتفريق القوة عن طريق منع المطاط من الترباس وجسم السيارة لمنع الضرر.
هناك خطر الذي يخفف في بولت إذا كان هو شكل شطيرة المطاط فقط ، لذلك وضعت في لون الألومنيوم في ذلك.
بالإضافة إلى ذلك ، يستخدم المطاط المطاط كلوروبرين.
فهي متفوقة على المطاط الطبيعي في مقاومة الطقس ، المقاومة للحرارة ، المقاومة الكيميائية ، وهي أفضل مادة للاستخدام في الهواء الطلق الناقل الخلفي للدراجات النارية.
● تم تصميم الجزء المتصاعد لاحتواء تقوية قوية في الكراك.
وقد تم تجهيز SR400 بمحرك إمساك من OEM ، إلا أن هذا المقبض تم إزالته وتصميمه ليتم تركيبه بمواد تقوية لإرفاق الناقل الخلفي.
مادة التسليح ملفوفة حول لوحة مسطحة 4 مم.
يكتسب جنس الذهب قوة عن طريق الانحناء.
لا يضاهي 400 ريال فقط الاهتزاز الفريد فحسب ، بل إنه يلعب أيضًا دورًا في زيادة وزن الحمولة في الناقل الخلفي.
● أجرؤ على خلق فجوة بين مجموعات الخلفية بحيث يمكن للركاب فهم شريط Grab.
يجب تثبيت دراجة نارية يمكن أن تتسع لجلوس شخصين على شريط Grab Bar و Seat of Seat.
نظرًا لأنه تم تصميم ناقل الحركة الخلفي في WorldWalk لإزالة شريط Grab ، فقد قمت بعمل فجوة بين المجموعات الخلفية والحمّالة الخلفية بحيث يمكن أيضًا أن تكون بمثابة قضيب سحب.
● يمكن استخدام المجموعات الخلفية بالتزامن مع تحميل الأمتعة.
نظرًا لأن موضع اللوحة العلوية للمجموعات الخلفية والحامل الخلفي يكون محاذًا لنفس الارتفاع مثل جسم كبير ، فمن الممكن تحميل شحنات كبيرة الحجم وعناصر ثقيلة باستخدامها مع مجموعات خلفية.
● الحد الأقصى لسعة الحمولة هو 5 كيلوجرام يمكن أيضًا تركيب الصندوق الخلفي.
وكان 400 ريال سعودي أيضا حقن الوقود من المكربن في اتجاه العصر.
على الرغم من أن بدء المحرك لا يزال KICK كالمعتاد ، إلا أنه يتلقى الانطباع بأن الاهتزاز ينخفض أيضًا بالمقارنة مع السابق.
لذلك تجرأت على تكرار اختبار القوة بـ 400 ريال من مركبات المكربن.
أنا شنت مربع الخلفي وضعت في الزجاجات البلاستيكية 2 لتر وكرر اختبار التشغيل الفعلي.
لأننا طلبنا القوة والأمان ، ازداد عدد قطع البناء ، ولكن حتى لو وضعنا الصندوق الخلفي ، أصبح المنتج الذي يمكن أن يقال بأنه دائم كبير!
●The rear carrier for SR400 is finally completed.
SR400 with 400cc single cylinder engine is characterized by overwhelmingly large vibration compared with the recent popular parallel twin cylinder engine.
Due to this vibration, the license plate may be broken from the bolts, and the bolts of the parts installed later may be loosened easily.
The basic design of SR400 has not been changed since 1978, however, there are no aftermarket rear carriers available for SR400 because of the risk of breakage due to the vibration.
World Walk has developed 20 different rear racks to date.
World Walk has made a new rear rack for SR400 with all my experiences.
●A rubber mount is adopted for the mounting area where the load is most likely to be applied.
A rubber mount system was adopted for the part that is directly fixed to the vehicle body with bolts.
If you look at SR400 with high mileage, you may see the cracks from the bolt part of the license plate.
Because the bolts are easily overloaded, thin license plates can crack.
World Walk's rear rack for SR400 is designed to be mounted with rubber at the fixing point to the vehicle body.
The rubber between the bolt and the vehicle body is designed to distribute the force and prevent damage.
An aluminum collar has been put inside because there is a risk of loosening the bolt if only the rubber is inserted.
In addition, the rubber is made of chloroprene rubber.
Compared to natural rubber, this material has superior weather resistance, heat resistance, and chemical resistance, making it ideal for use in the rear racks of motorcycles used outdoors.
●It is designed to have a reinforcement material which is resistant to cracking.
Though SR400 is equipped with the stock grab rail, World Walk has designed to remove the grab rail and install the reinforcement for the rear carrier.
The reinforcement is a 4mm flat plate with a folded edge.
The strength of metal is increased by bending.
It is not only to withstand the vibration of SR400, but also to increase the load capacity of the rear carrier.
●There is a gap between the rear seat and the passenger's seat so that the passenger can hold the seat as a grab bar.
A two-seater motorcycle must be equipped with grab bars and seat belts.
The World Walk rear rack is designed to be mounted without the grab bar, so World Walk made a gap between the pillion seat and the rear rack so that it can also serve as a grab bar.
●It can be used with the rear seat to carry a large load.
The tops of the pillion seat and the pillion rack are aligned at approximately the same height, so large or heavy loads can be carried when used in conjunction with the pillion seat.
●The maximum load capacity is 5kg, and a rear box can be attached.
SR400 is also changed from carburetor to fuel injection as the times have gone by.
The engine still needs a kick to start, but it seems to vibrate less than before.
So the strength test is repeated with SR400 on purpose.
The rear box was installed, and a number of 2L plastic bottles were put in, and the actual driving test was repeated.
The number of components has been increased for strength and safety, but you can still put a rear box on it!This is a product that can be said so.