[محتويات المنتج]
حامل خنق الألومنيوم
أنبوب الانضغاط
قبضة التحكم بالتحميل
STD Reel 4Size (35/40/45 / 50MM)
التقدمي عمود الحدبات بكرة
دليل تعليمات الإصدار الياباني
* إنه يستخدم جسم الخانق OEM ، وعندما يكون حجم بكرة OEM هو 33.4mm. تشتمل وحدة الخانق OEM الخاصة بهذا الطراز على مفتاح تشغيل / إيقاف ، ومفتاح الوضع ، وزر التشغيل. من المستحيل استخدام عن طريق استبدال مع مجموعة خنق OEM بسبب رمز التبديل الموصل الحركة (YM 11-0098) ليس لديه مفتاح الوضع.
* من أجل تثبيت مجموعة Rev 2 والحصول على جميع وظائف التبديل الضرورية ، يتطلب هذا الطراز مقبضًا من جزء OEM بعد البيع (على الأقل 50mm أطول من المقود OEM على الأقل إلى اليمين) من تصنيع المعدات الأصلية. ويرجى تركيب مجموعة خنق حقيقية داخل السكن الخانق Rev 2.
* تأتي مجموعة Rev 2 مع كابل مصمم خصيصًا لكل طراز ، ولكن وحدة التحكم Rev 2 غير مصممة بشكل خاص للنموذج. لذلك ، في ظل ظروف معينة ، قد لا تتمكن مجموعة Rev 2 من التثبيت مباشرة مع مسمار التثبيت بسبب المساحة المحدودة الخاصة بـ OEM.
* في حالة كون المقود قصيرًا لأنبوب الخانق القسري 2 وقفل التركيب ، فإنه يتطلب نقل أجزاء التحكم الأخرى واستبدال المقبض بأجزاء طويلة من الأجزاء اللاحقة اعتمادًا على طريقة التركيب.
* من مسؤوليتك (العملاء) لتحديد أفضل طريقة لتركيب الدراجة النارية والتحقق من أن مجموعة Rev 2 لديها تصريح صحيح للتشغيل الآمن وتثبيتها بشكل صحيح.
* تم تنفيذ تركيب المنتج بواسطة ميكانيكي مؤهل ، ومن الضروري التحقق بعناية من الوظيفة المناسبة.
*تحذير : التثبيت غير السليم قد يؤدي إلى إصابة خطيرة أو الوفاة.
[Kit Contents]
Aluminum Throttle Holder
Throttle Tube
road control grip (tennis)
4 sizes of standard reels (35 / 40 / 45 / 50mm)
progressive cam reel
Japanese instruction manual
*In case the stock throttle body is used and the stock reel size is 33.4mm.The stock throttle assembly for this model includes an on / off switch, mode switch, and starter button.The Motion Pro accessory switch (YM11-0098) does not have a mode switch and cannot be used interchangeably with the stock throttle assembly.
*This model requires a longer-than-stock aftermarket handlebar (at least 50mm longer on the right side than the stock handlebar) in order to fit the Rev2 kit and have all the necessary switch functions.Then install the stock throttle assembly inside the Rev2 throttle housing.
*The Rev2 kit comes with a cable specifically designed for each model, but the Rev2 throttle itself is not model specific.Therefore, under certain circumstances, the Rev2 kit may not be a direct bolt-on due to the limited stock space.
*Depending on the installation method, if the handlebar is too short for the Rev2 throttle tube and grips, other control components may need to be moved or the handlebar replaced with a longer aftermarket one.
*It is your responsibility to determine the best method for your motorcycle and to ensure that the Rev2 kit is properly installed with the correct clearances for safe operation.
*The installation of the product must be carried out by a qualified mechanic, who must carefully check for proper functioning.
*Warning: Improper installation can result in serious injury or death.