GC - 019، GC - 020 هيكل من الألومنيوم للذراع المتأرجحة عرض واسع بذراع سوينغ بنفس عرض ذراع التأرجح MONKEYWide (العرض 187-190 مم) إنه سوينغ ذراع مصنوع.
يمكنك استخدام لوحة الوصل MONKEYOEM كما هو ، يمكنك استخدام قرص قرص 39055 WideRear.
ذراع التأرجح متوافق مع كل من الأسطوانة والقرص.
عند تركيب 8-4.0J ، مطلوب ضرس 4mmOffset للجبهة و Sprocket فاصل 4 ملم مطلوب للخلف.
عند تركيب 10-4.0 ، يمكنك إزاحة على جانب المحرك ، بحيث لا تحتاج إلى ضرس أمامي (مطلوب فاصل OffsetSprocket 8 ملم عند استخدام لوحة الوصل العادية)
■ وصف الخيار
[الانتهاء من ذراع سوينغ]
・ التشطيب الأسود المؤكسد (رقم جزء GCraft : 60198) تسون 25000 ين
・ الانتهاء من SeraCoat (رقم جزء GCraft : 60807) تسون 30000 ين
[ما هو SeraCoat؟]
SeraCoat هو طلاء مصنوع من قبل NIC ، والذي يتم استخدامه حاليًا في الفريق العسكري الأمريكي ، والطلاء الخاص للخبز ، والطلاء البارد.
يتم فحصها بحيث تكون قادرة على التعامل مع الظروف القاسية ، وهي عبارة عن طلاء ينتج وينتج عن التركيز على الأداء مثل مقاومة الحرارة ، ومقاومة التآكل ، والمتانة ، ومقاومة المذيبات ، وتبديد الحرارة ، والعزل الحراري الخ.
يتم طحن السيراميك بواسطة آلة خاصة ويخلط في الطلاء لتحسين قوة طبقة الطلاء 。 وبسبب ذلك ، يصبح سطحًا يشبه الساتان ، ولكن يمكن جعل الطبقة رقيقة جدًا (25Micron)
علامات اللحام (الخرزة) من الممكن أيضًا المغادرة دون الإختباء.
الالتصاق هو أعلى قيمة بين مواد الطلاء ، لا يمكن تشكيل التجاعيد حتى من خلال الطي ، لا يمكن تقشير الطلاء بسهولة من أحجار التنقيط ، لذلك فهي مناسبة للإطار ، معالجة سطح الذراع البديل.
* تاريخ التسليم العادي + 3-5 أسابيع.
[اختيار : سلسلة sliderSpec.]
سلسلة sliderBolt stop Spec. (GCraftProductNo : 60228) +1000 ين
تغيير شريط التمرير من Rivet Stop إلى Bolt Stop 。 من السهل استبدالها عندما ترتديه.
[اختيار : بنية الجزء المحوري
المحور محامل الجزء المواصفات (GCraftProductNo : 60006) +3000 ين
يغير القياسي الجزء المحوري من بوش إلى المحمل.
تتحقق المتانة المحسنة وخصائص التشغيل السلس.
[اختيار : موقف بالإضافة إلى معالجة HookBase
موقف هوكبيسي (M6) معالجة إضافية (GCraftProductNo : 60903) +3000 ين
جعلت GCraft حامل هوك أو خارج الشركة جعلت هوك ، (M6) يمكنك تثبيت.
[اختيار : جزء محوري (Φ12) المواصفات.]
جزء محور ذراع التأرجح Φ12Spec. (رقم جزء GCraft : 60898)
ذراع التأرجح يعد هذا خيارًا لتعيين جزء محوري على Φ12 。 يحتاج جانب الإطار أيضًا إلى Φ12.
رمح مخصصة ، مع جنس البندق.
The wide width swingarm for GC-019 and GC-020 aluminum frame is the same width (187-190mm wide) as the monkey wide swingarm.
The 39048 wide rear disc hub can be used with this kit.
This swingarm is compatible with both drum and disc.
When installing 8-4.0J, 4mm offset sprocket is required for front and 4mm sprocket spacer is required for rear.
When installing the 10-4.0, the front sprocket is not necessary because it can be offset on the engine side (Offset sprocket spacer 8mm is necessary when using the stock hub)
■Option Description
[Swingarm finish]
・Black anodized finish (G-Craft part number: 60198)
・Cerakote finish (G-Craft part number: 60807)
[What is Cerakote?]
Cerakote is a special heat coloring and normal temperature paint manufactured by NIC and currently used by the US military.
It has been inspected to meet the harsh conditions, and has excellent heat resistance, abrasion resistance, durability, solvent resistance, heat dissipation, heat insulation and other performance-oriented research and production.
Ceramic is crushed by a special machine and mixed into the paint to improve the strength of the paint film.Therefore, the surface becomes pear-shaped, but the coating film can be made very thin (25 microns)
Weld marks (beads) can be left on the surface without being hidden.
The adhesion is the highest among all coating materials, and the surface treatment is suitable for frames and swingarms because it does not wrinkle even when bent, and the paint does not peel off easily even by stepping stones.
*Please allow 3 to 5 weeks for normal delivery.
[Options: Chain Slider Specifications]
Chain slider bolt fixing specification (G-Craft part number: 60228)
Change the chain slider from riveted to bolted.Easy to replace when worn out.
[Options: Pivot section structure]
Pivot section bearing specification (G-Craft part number: 60006)
The standard is to change the pivot part of the bushing to a bearing.
Improved durability and smooth operating characteristics.
[Options: Additional processing of stand hook base]
Stand hook base (M6) additional processing (G-Craft part number: 60903)
G-Craft stand hook or aftermarket stand hook (M6) can be attached.
[Options: Pivot section (Φ12) specification]
Swingarm pivot part Φ12 specification (G craft part number)60898)
It is an option to make the swingarm pivot part Φ12.The frame side also needs to be Φ12.
Special shaft and nut included.