TIGRA system لا يمكن لـ Clutch ضبط مساحة الأحذية على نطاق واسع مثل الموديلات الأخرى ، ولكن لدينا Clutch تحاول أن تكون واسعة قدر الإمكان.
لا يمكن أن تكون مساحة الأحذية أوسع من النماذج الأخرى ، تستخدم ShoeMaterial المواد ذات الأداء الممتاز في تناول الطعام.
نظرًا لأن أداء "شو" للأكل جيد جدًا ، فإننا نحقق أسرع أداء من خلال كبح أداء التسارع المبدئي والأداء المتسارع المتوسط عند فتح Axel وفقدان الانزلاق.
عند الإعداد الذي يمكن أن يعكس هذا الأداء في تناول الطعام في نظام القيادة أداء اندفاعة بدء التشغيل للغاية؟ أداء التسارع وسيطة في إعادة فتح أكسل؟ أسرع upsetc عن طريق قمع خسارة الانزلاق سأفعل الكثير جدا الأداء.
اعتمادا على إعداد نظام القيادة ، تم تصميمه على أساس دوران ClutchIN 4500 rpm.
[حول نماذج متوافقة]
TIGRA 125؟ 150 هو FrameNO ، مخلب قطره 125 مم؟ 130mm ، يوجد نوعان.
[سيارة 125cc]
130 مم من البداية إلى A1F 05753
من A1F 05753 إلى 125mm الحالي
[150cc مركبة]
130mm من البداية A5F05047
من A 5 F 0 5048 إلى 125mm الحالي
لاستبدال القابض فقط ، يتم تبديل المركبات المطابقة 125 ملم لكلتش كما هي ، لكن السيارة 130 مم الأولية لها فتحة مخلب مختلفة ، لذلك يمكن استخدامها من خلال تبادل القابض؟ مجموعة الخارجي.
TIGRA clutches do not have as wide a shoe area as other clutches, but our clutches are designed to be as wide as possible.
Because the shoe area is not as large as other models, the shoe material is made of a material with excellent bite performance.
Because the shoe bite performance is very good, the maximum speed is improved by reducing the starting acceleration performance, the intermediate acceleration performance when the accelerator is opened again, and the slip loss.
By setting the drivetrain to reflect this bite performance, the performance will be improved in all areas such as starting dash performance, mid-range acceleration when accelerating again, and maximum speed by reducing slip loss.
It depends on the drivetrain setting, but the clutch IN speed of 4500rpm is the basic design.
[Compatible models]
TIGRA125 and TIGRA150 have two different clutch diameters, 125mm and 130mm, depending on the frame no.
[125cc model]
130mm from initial to A1F05753
125mm from A1F05753 to current
[150cc model]
130mm from initial to A5F05047
125mm from A5F05048 to current
If you are replacing the clutch only, you can replace the clutch only for 125mm compatible bikes as it is, but for initial 130mm bikes, you can use the clutch and outer set by replacing the clutch and outer set because the clutch diameter is different.