EX مواد الأنابيب : التيتانيوم
EX أنبوب القطر : Φ42.7
ذيل الأنابيب خارج القطر : Φ60.5
* تم تثبيت نهاية Baffle بالفعل على كاتم الصوت عند شحنها.
* بما أن Conical Titanium Silencer V-1 / V-2 / V-3 لديها بالفعل أقواس ، فلن يتم إرفاق شريط كاتم الصوت بالعدة.
* سوف تحتاج إلى استبدال الخطوة الخلفية بنوع واحد لتثبيت هذا المنتج. عند تثبيت هذا المنتج ، ستحتاج إلى قطع (معالجة) إطار منطقة الخطوة الترادفية.
* قد تحتاج إلى استبدال الوامض اعتماداً على نوع الوامض.
* يجب تغيير غطاء المرشح وصنبور التجفيف إلى نوع مسطح. يتم تضمين غطاء مسطح ومجموعة التصريف في EX Exhaust Kit. يرجى استبدالها عند تثبيت العادم.
* قادرة على استخدام NITRO RACING Tandem Step Kit Type 2. (قد تواجه السيارات التي لديها بالفعل NITRO RACING Tandem Step Kit 1 تداخل بين كاتم الصوت (أعلى) ومجموعة خطوة جنبا إلى جنب بسبب موقع اللحام الثابت للوحة التركيب.)
* لا يتوافق عادم العادم مع تعليق التعليق من النوع OEM. انها تتوافق مع جبل الإعداد مع هيكل ثقب المسمار M6.
* الصورة للاشارة فقط. قد تختلف الصورة المعروضة عن المنتج الفعلي.
[Silencer Specification]
・Thickness: Φ90
・Silencer material: Aluminum
[exhaust pipe specs]
・Assembly method: 4in1
・Tail pipe outer diameter: Φ60.5
・Exhaust pipe diameter: Φ42.7
・Exhaust Pipe Material: Titanium
[Components]
・Assembly part
・Tail pipe
・8 springs
・Silencer
・End baffle
・Silencer band
・Silencer Bracket
・Exhaust pipe per vehicle
[Maintenance Data]
・Drain bolt: Manifold section needs to be detached
・Change oil filter: Manifold section needs to be detached
・Center stand: Not available
*The end baffle is pre-installed on the silencer at the time of shipment.
*Conical titanium silencers V-1 / V-2 / V-3 do not come with a silencer band as a bracket is pre-installed.
Never remove the exhaust baffle from the NITRO RACING silencer.It is also recommended to check and overhaul the silencer's internal sound deadening wool on a regular basis.
It is necessary to change to a single type rearset.In this case, it is necessary to cut off the frame of the pillion step when you replace the stock one with this product.
Depending on the type of blinker, it may be necessary to replace the blinker.
It is necessary to change the filter cover and drain bolt to a flat type.The Flat Cover & Drain KIT is included in the Exhaust Kit and should be replaced when the exhaust is installed.
It is compatible with NITRO RACING Pillion Step KIT Type2.(As to the vehicles already equipped with NITRO RACING Pillion Step KIT Type 1, there is a rare case of interference between the upper part of the silencer and the Pillion Step KIT due to the welding position of the mounting plate.)
The exhaust bracket is not compatible with the stock rear suspension mount.Compatible with laydown mount adaptation with M6 screw hole construction.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.