مع هذا HandArm مع هذه المقابض اليدوية HandArm Ball puller grips Handjrm عند تشديد مسمار التثبيت بحيث يمكن تثبيته بحيث لا يتحرك ، لذلك يمكن ربط العزم وإزالته بسهولة في زاوية معينة.
أيضا ، إذا قمت بإمساك المقود سيكون من الآمن منع الانفجار من الصدم بواسطة الصدمة عند إزالته.
يمكنك إزالته بأمان مع نهاية قضيب التعادل أو كرة مشتركة من SuspensionAArm.
LargeSmall لقد قمنا بإعداد نوعين من Puller ، لذا يرجى الاختيار وفقا لمحتويات عملك.
الشخص الكبير هو 28 سم في الطول الكلي من مسمار الطرف إلى المقود ، وفتح الظفر الذي يداعب طرف الكرة المفصلي هو 2 سم.
يبلغ طول الشخص الصغير 26 سم طولاً و 1.7 سم في فتحة الظفر.
يمكن إزالته بأمان.
LargeSmall لقد قمنا بإعداد نوعين من Puller ، لذا يرجى الاختيار وفقا لمحتويات عملك.
الشخص الكبير هو 28 سم في الطول الكلي من مسمار الطرف إلى المقود ، وفتح الظفر الذي يداعب طرف الكرة المفصلي هو 2 سم.
يبلغ طول الشخص الصغير 26 سم طولاً و 1.7 سم في فتحة الظفر.
This ball joint puller with hand arm allows you to grip the hand arm when tightening the adjusting bolt so that it does not move, making it easy to apply torque and to remove it at a secure angle.
Also, if you hold the handle, you can prevent the puller from being blown away by the impact when it comes off.
It can be safely removed either from the tie rod ends or the ball joints of the suspension A-arms.
We offer two types of pullers, large and small, so you can choose the one that best suits your work.
The larger one has a total length of 28cm from the tip jaw to the handle and a 2cm opening for the jaw that clamps the ball joint at the tip.
The smaller one has a total length of 26cm and a claw opening of 1.7cm.
Safe to remove.
We offer two types of pullers, large and small, so you can choose the one that best suits your work.
The larger one has a total length of 28cm from the tip jaw to the handle and a 2cm opening for the jaw that clamps the ball joint at the tip.
The smaller one has a total length of 26cm and a claw opening of 1.7cm.