لمركبات بطارية 12V
هيكل غير التجميع
عرض 180km / ساعة
لون لوحة : أسود (دايتونا المواصفات.)
مادة الحافة : الفولاذ المقاوم للصدأ
لون الجسم : أسود
وزن : 270G
طول تسخير : 200MM
تصاعد العرض : 45mm و
وشملت على شكل V قوس
* تعديل ل [60KM = 1.400rpm] المركبات الميكانيكية متر OEM (أي. السيارات التي تستخدم العدادات الميكانيكية). قد لا تتكيف مع الطرازات القديمة أو السيارات ذات العدادات غير القياسية.
* معدلة لنسبة الترس 1 : 5 (Crank 5 RPM-tachometer cable 1 RPM) تصنيع المعدات الأصلية الميكانيكية مقياس سرعة الدوران المركبات (أي. السيارات التي تستخدم كابلات مقياس سرعة الدوران) فقط. لا يمكن تركيبها على مركبات بدون آلات قياس سرعة آلية ميكانيكية (FTR / TW) أو tachometers مع نسبة مختلفة من العتاد.
* حصري للمركبات مع بطارية 12V. غير مناسبة للمركبات التي ليس بها بطاريات أو مركبات مزودة ببطارية 6V (بما في ذلك النماذج التي تحول الكهرباء 12V).
* غير مقاوم للماء بشكل كامل. قد يتسبب اختلاف الرطوبة ودرجة الحرارة الناتجة عن الطقس في جعل زجاج العداد سحابة.
Exclusive for 12V battery vehicles
Non-decomposable structure
180km/h display
Panel color: Black (DAYTONA specification)
Rim material: Stainless steel
Body color: Black
Body weight: 270g
Harness length: 200mm
Installation Width: 45mm
With V-shaped bracket
*The speedometer can be used basically with a stock mechanical meter (a bike that uses a meter cable) of the "60km/h=1.400rpm" standard, which is common among Japanese models.This product cannot be used for foreign vehicles with different meter standards and some old vehicles.
*The tachometer is used in the SR and other models, and the "Gear ratio 1: Fits only to bikes with a stock mechanical tachometer (using a tachometer cable) of the "5 (5 turns of the crank = 1 turn of the tachometer cable) " standard.This product cannot be used for vehicles that are not equipped with a mechanical tachometer as standard equipment (FTR, TW, etc.) or for vehicles with different gear ratios.
*Exclusive for 12V battery vehicles.This product does not work properly on battery-less vehicles and vehicles with 6V batteries (including models converted to 12V electrical).Even with a 12V battery, the meter may not operate properly if the battery is weak, or the internal circuit of the meter may fail due to instantaneous overvoltage.Please make sure that a stable power supply is available before use.
*It is not completely waterproof.The glass surface may become cloudy due to temperature differences and humidity inside and outside the meter case.
*Removing the stock gauges may result in the loss of use of various indicators.Please prepare separately if necessary.
*The meter cable is a consumable item.If the outer tube is cracked or damaged, moisture, oil, or dust may enter the meter and cause a failure.When replacing a mechanical meter, be sure to check the meter cable at the same time and replace it with a new one if necessary.