الوزن swingarm : العادي 3.5 كجم → 1.8 كجم (للحصول على GROM ، ساحة ثلاثية ، قصير بدون ، + 0 سم)
كمادة الذراع المتأرجحة ، يتم استخدام مادة 7N01 من الألومنيوم ، فهي خفيفة الوزن وعالية الصلابة من 1.8 كجم مقابل 3.5 كجم من ذراع OEMSwing ، كما أنها تحسن من قابلية تشغيل دراجة نارية من خلال تقليل الوزن تحت الربيع.
■ وصف الخيار
[الانتهاء من ذراع سوينغ]
・ التشطيب الأسود المؤكسد (رقم جزء GCraft : 60198) تسون 25000 ين
・ الانتهاء من SeraCoat (رقم جزء GCraft : 60807) تسون 30000 ين
[ما هو SeraCoat؟]
SeraCoat هو طلاء مصنوع من قبل NIC ، والذي يتم استخدامه حاليًا في الفريق العسكري الأمريكي ، والطلاء الخاص للخبز ، والطلاء البارد.
يتم فحصها بحيث تكون قادرة على التعامل مع الظروف القاسية ، وهي عبارة عن طلاء ينتج وينتج عن التركيز على الأداء مثل مقاومة الحرارة ، ومقاومة التآكل ، والمتانة ، ومقاومة المذيبات ، وتبديد الحرارة ، والعزل الحراري الخ.
يتم طحن السيراميك بواسطة آلة خاصة ويخلط في الطلاء لتحسين قوة طبقة الطلاء 。 وبسبب ذلك ، يصبح سطحًا يشبه الساتان ، ولكن يمكن جعل الطبقة رقيقة جدًا (25Micron)
علامات اللحام (الخرزة) من الممكن أيضًا المغادرة دون الإختباء.
الالتصاق هو أعلى قيمة بين مواد الطلاء ، لا يمكن تشكيل التجاعيد حتى من خلال الطي ، لا يمكن تقشير الطلاء بسهولة من أحجار التنقيط ، لذلك فهي مناسبة للإطار ، معالجة سطح الذراع البديل.
* تاريخ التسليم العادي + 3-5 أسابيع.
[الخيار 1] سلسلة sliderBolt stop Spec. (رقم جزء GCraft : 60228) +1000 ين
تغيير شريط التمرير من Rivet Stop إلى Bolt Stop 。 من السهل استبدالها عندما ترتديه.
[الخيار 2] المحور محامل الجزء المواصفات (رقم الجزء GCraft : 60006) +3000 ين
يغير القياسي الجزء المحوري من بوش إلى المحمل.
تتحقق المتانة المحسنة وخصائص التشغيل السلس.
[Option3] موقف هوكبيسي (M6) معالجة إضافية (رقم جزء GCraft : 60903) +3000 ين
جعلت GCraft حامل هوك أو خارج الشركة جعلت هوك ، (M6) يمكنك تثبيت.
[Option4] سحب سلسلة الخيار
・ سباق الحلبة. (رقم جزء GCraft : 60186) +3000 ين
سنقوم بتغيير رسم السلسلة التقليدية إلى الخلف إلى HookSpec. 。 رقم جزء GCraft : 32071 ・ 32072 ・ يمكن تثبيت 32073 Racing Stand Hook.
* رقم جزء GCraft : 33170APLockheed caliperSupport لا يمكن تركيبه (والتدخل)
・ خلف نوع السحب (رقم جزء GCraft : 60221) +3000 ين
هو ضابط السحب الخلفي الذي تم تصميمه للتخلص من الصيانة المزعجة للصيانة عند التعديل.
يأتي الجوز التكيفي إلى أقصى درجة في نظام Swingarm ، لذلك من السهل ضبط الضبط الذي كان من الصعب تحويله بسبب تداخل الأدوات إلخ.
* لا يمكن تثبيت حامل السباق HookSpec. ، OWType في نفس الوقت
・ OWType (رقم جزء GCraft : 60014) +3000 ين
من خلال معالجة جزء السحب السلسلة بواسطة Taper ، قمنا بإزالة الفجوات العلوية والسفلية من Axle Shaft.
بما أن القطع المجهزة تتحرك ، فلا توجد فجوات كبيرة وسفلية 。 وهي آلية اعتمدت أيضا من قبل سوينغ ذراع للدراجة الكبيرة.
・ OWType سباق حامل HookSpec. (رقم جزء GCraft : 60188) +5000 ين
تغيير الطرح OWTypeChain الخلفية إلى الوقوف HookSpec.
رقم جزء GCraft : 32071 ・ 32072 ・ يمكن تثبيت 32073 Racing Stand Hook.
* رقم جزء GCraft : 33170APLockheed caliperSupport لا يمكن تركيبه (والتدخل)
・ نوع غريب الأطوار (رقم جزء GCraft : 60059) +5000 ين
إنه طرح سلسلة من صيغة غريب الأطوار توجد عادة في كاواساكي للدراجات النارية.
* عند استخدامها ل * discSpec. ، يمكنك فقط استخدام دعم الفرجار من نوع الفرجار في الجزء السفلي من الذراع المتأرجح.
Swingarm Weight: Stock 3.5kg→1.8kg (for GROM, triple square, no sway bar, +0cm)
The swingarm is made of aluminum 7N01 material and it is 1.8kg lighter than stock swingarm 3.5kg.
■Option Description
[Swingarm finish]
・Black anodized finish (G-Craft part number: 60198)
・Cerakote finish (G-Craft part number: 60807)
[What is Cerakote?]
Cerakote is a special heat coloring and normal temperature paint manufactured by NIC and currently used by the US military.
It has been inspected to meet the harsh conditions, and has excellent heat resistance, abrasion resistance, durability, solvent resistance, heat dissipation, heat insulation and other performance-oriented research and production.
Ceramic is crushed by a special machine and mixed into the paint to improve the strength of the paint film.Therefore, the surface becomes pear-shaped, but the coating film can be made very thin (25 microns)
Weld marks (beads) can be left on the surface without being hidden.
The adhesion is the highest among all coating materials, and the surface treatment is suitable for frames and swingarms because it does not wrinkle even when bent, and the paint does not peel off easily even by stepping stones.
*Please allow 3 to 5 weeks for normal delivery.
[Option 1] Chain slider bolt fixing specification (G-Craft part number:60228)
Change the chain slider from riveted to bolted.Easy to replace when worn out.
[Option 2] Pivot part bearing specification (G-Craft part number: 60006)
The standard is to change the pivot part of the bushing to a bearing.
Improved durability and smooth operating characteristics.
[Option 3] Stand hook base (M6) additional processing (G-Craft part number: 60903)
G-Craft stand hook or aftermarket stand hook (M6) can be attached.
[Option 4] Chain adjuster option
・Racing stand hook specification (G-Craft part number: 60186)
The rear part of the conventional chain pull can be used as a stand-hook.G-Craft Part Number: The 32071, 32072 and 32073 racing stand hooks can be installed.
*G Kraft Part Number:33170AP Lockheed caliper support cannot be installed (will interfere)
・Back pull type (G-Craft part number: 60221)
This backward pull adjuster is designed to eliminate the hassle of adjusting the chain.
Since the adjusting nut is located at the end of the swingarm, it is easy to adjust the adjusting part which was difficult to turn due to interference of tools
*Can not be installed on the racing stand hook specification and OW type at the same time
・OW type (G-Craft part number: 60014)
The chain puller is tapered to eliminate vertical misalignment of the axle shaft.
The tapered frame moves so there is no vertical misalignment.This mechanism is also used for swingarms of big bikes.
・OW type racing stand hook specification (G-Craft part number: 60188)
The rear part of OW type chain pull is changed to stand hook specification.
G-Craft Part Number: The 32071, 32072 and 32073 racing stand hooks can be installed.
*G Kraft Part Number:33170AP Lockheed caliper support cannot be installed (will interfere)
・Eccentric type (G-Craft part number: 60059)
This is an eccentric type chain puller commonly found on Kawasaki motorcycles.
*Only caliper supports with calipers attached to the lower part of the swingarm can be used on disc models.