وهو ذراع سوينغ باستخدام أنبوب دائري مشابه لذراع OEMSwing.
العرض الداخلي للذراع المتأرجح هو 167-170 مم مماثل لتصنيع المعدات الأصلية.
استخدام صلابة عالية مادة الألومنيوم 7N01 الأنابيب وجعل مزيد من قطر الأنابيب سمكا من تصنيع المعدات الأصلية (Φ30) ومن سوينغ الذراع التي زادت القوة عن طريق القيام به.
مثالية للعملاء الذين يرغبون في الحفاظ على النمط العادي.
أجزاء شملت : : قضيب الفرامل (+ 4 سم أو أكثر) ، تلقى التوأم تعليق بولت (صدمة مزدوجة فقط) سلسلة ميكي قطعة (اعتمادا على الخيار) مرفق.
■ وصف الخيار
[الانتهاء من ذراع سوينغ]
・ التشطيب الأسود المؤكسد (GCraftProductNo : 60198)
・ الانتهاء من SeraCoat (GCraftProductNo : 60807)
[ما هو SeraCoat؟]
SeraCoat هو طلاء مصنوع من قبل NIC ، والذي يتم استخدامه حاليًا في الفريق العسكري الأمريكي ، والطلاء الخاص للخبز ، والطلاء البارد.
يتم فحصها بحيث تكون قادرة على التعامل مع الظروف القاسية ، وهي عبارة عن طلاء ينتج وينتج عن التركيز على الأداء مثل مقاومة الحرارة ، ومقاومة التآكل ، والمتانة ، ومقاومة المذيبات ، وتبديد الحرارة ، والعزل الحراري الخ.
يتم طحن السيراميك بواسطة آلة خاصة ويخلط في الطلاء لتحسين قوة طبقة الطلاء 。 وبسبب ذلك ، يصبح سطحًا يشبه الساتان ، ولكن يمكن جعل الطبقة رقيقة جدًا (25Micron)
علامات اللحام (الخرزة) من الممكن أيضًا المغادرة دون الإختباء.
الالتصاق هو أعلى قيمة بين مواد الطلاء ، لا يمكن تشكيل التجاعيد حتى من خلال الطي ، لا يمكن تقشير الطلاء بسهولة من أحجار التنقيط ، لذلك فهي مناسبة للإطار ، معالجة سطح الذراع البديل.
* تاريخ التسليم العادي + 3-5 أسابيع.
[الخيار 1] سلسلة sliderBolt stop Spec. (رقم جزء GCraft : 60228)
تغيير شريط التمرير من Rivet Stop إلى Bolt Stop 。 من السهل استبدالها عندما ترتديه.
[الخيار 2] المحور محامل الجزء المواصفات (رقم الجزء GCraft : 60006)
يغير القياسي الجزء المحوري من بوش إلى المحمل.
تتحقق المتانة المحسنة وخصائص التشغيل السلس.
[Option3] موقف هوكبيسي (M6) معالجة إضافية (رقم جزء GCraft : 60903)
جعلت GCraft حامل هوك أو خارج الشركة جعلت هوك ، (M6) يمكنك تثبيت.
[Option4] سلسلة CoverBracket معالجة إضافية (رقم المنتج GCraft : 60191)
عادي إنها عملية تجعل من الممكن تحميل سلسلة التسلسل.
[Option5] سلسلة سحب قطعة وراء نوع السحب
هو ضابط السحب الخلفي الذي تم تصميمه للتخلص من الصيانة المزعجة في وقت تعديل السلسلة.
ذراع التأرجح حيث تأتي Adjust Nut إلى الخلف ، من السهل ضبط قسم الضبط الذي كان من الصعب تحويله بسبب التداخل مع الأداة.
الفضة (رقم المنتج GCraft : 60226) ، أسود (رقم المنتج GCraft : 60226) يمكن اختياره من لونين.
This swingarm uses the same round pipe as the stock swingarm.
The inner width of swingarm is 167-170mm as same as stock.
This swingarm is made of high rigidity aluminum 7N01 pipe and the pipe diameter is larger than stock (Φ30) to increase the strength.
Ideal for customers who want to maintain the stock style.
Components: Includes brake rod (+4cm or longer), twin suspension support bolts (twin shocks only) and chain adjuster (depending on options).
■Option Description
[Swingarm finish]
・Black anodized finish (G-Craft part number: 60198)
・Cerakote finish (G-Craft part number: 60807)
[What is Cerakote?]
Cerakote is a special heat coloring and normal temperature paint manufactured by NIC and currently used by the US military.
It has been inspected to meet the harsh conditions, and has excellent heat resistance, abrasion resistance, durability, solvent resistance, heat dissipation, heat insulation and other performance-oriented research and production.
Ceramic is crushed by a special machine and mixed into the paint to improve the strength of the paint film.Therefore, the surface becomes pear-shaped, but the coating film can be made very thin (25 microns)
Weld marks (beads) can be left on the surface without being hidden.
The adhesion is the highest among all coating materials, and the surface treatment is suitable for frames and swingarms because it does not wrinkle even when bent, and the paint does not peel off easily even by stepping stones.
*Please allow 3 to 5 weeks for normal delivery.
[Option 1] Chain slider bolt fixing specification (G-Craft part number:60228)
Change the chain slider from riveted to bolted.Easy to replace when worn out.
[Option 2] Stand hook base (M6) additional processing (G-Craft part number: 60903)
G-Craft stand hook or aftermarket stand hook (M6) can be attached.
[Option 3] Additional processing of chain cover bracket (G-Craft part number: 60191)
This modification allows the stock chain cover to be installed.