[للجبهة]
مواد : ألومنيوم 2017S (معالجة بأكسيد)
اللون : أسود
الفرجار المقابل : بريمبو 40 مم
المقابلة الدوار : قرص قياسي مزدوج
أجزاء شملت : غير القابل للصدأ بولت ، 0.5 مم شيم لجبل الفرجار
* تستند تصاميم جميع مساند الفرجار المعدلة لملمس 40 مم على أساس BREMBO 40mm من الفرجار. بسبب 26.5mm الإزاحة ، وضبط مع SIM المرفقة عند تثبيت ل AP ، NISSIN الفرجار. (غير معدلة للفرج 6POT.)
* سيم أيضا ضبط التسامح من المنتج.
* عن طريق تغيير الفرجار والدوار ، فإن نقطة الضرب من الدوار والوسادة تتغير. في هذه الحالة ، قم بقطع سطح اللوحة حيث لا تضرب الدوار.
* [الملعب المسمار الفرجار] brembo 40mm : P1.5، BREMBO 65mm : P1.25، NISSIN : P1.25، TOKICO : P1.25
* لم يتم ضبطه على BREMBO 65mm pitch 2 PAD caliper.
* الصورة للاشارة فقط. قد تختلف عن المنتج الفعلي.
Front axial caliper support for standard rotor diameter
GALE SPEED / brembo 4POT for 40mm pitch
Caliper type: GALE SPEED / brembo axial 40mm pitch 4POT
Disc category: double-disc
Color: Black
Compatible rotor size: Stock rotor diameter
*The product in the image may differ from the actual product.
*All caliper supports for 40mm pitch are designed with "brembo 40mm casting caliper".Since the offset is 26.5mm at the center, please adjust with the attached shim when you use it with AP and NISSIN calipers.(Not compatible with 6POT calipers.)
*The supplied shims are also effective in correcting product errors in individual calipers.
*Changing calipers and rotors will change the contact surface between the rotors and pads.In such a case, scrape off the surface of the pad that does not contact the rotor and use it.
*Caliper bolt pitch brembo 40mm: P1.5
*There may be changes in product specifications due to the manufacturer's reasons.