![M-TEC Chukyo حذاء الغبار لشوكة [بند سعر خاص]](http://img-webike-370429.c.cdn77.org/catalogue/images/34758/03291533_56fa219e7f432_TS.jpg)
PMC(Performance Motorcycle Creative) قرص دوار جبل ...
I think it's thinner than the old one. Out of a total of 6, Quantity:2pc. The Set bent in a weird way during the final tightening. It never did this before.
 |  |  |
 |  |  |
 | ||
In the domestic, it is the Mach IV final type, H2C.Chrome plated fender and graphic of the same pattern as Mach I was adopted.It was exported abroad until mid - 1975.
| الإزاح | 748 | نوع المحرك | Air-cooled/2-stroke/Piston Valve/Parallel 3-cylinder |
| الحد الأقصى لانتاج (ملاحظة) | 74ps(54.0 kw)/6800rpm | عزم الدوران الأقصى (كجم ق / م) | 7.9kg・m(77.5N・m)/6500rpm |
| مركبة الوزن (الوزن الجاف) | 192 | سعة خزان الوقود لتر | 17.0 |
ALCAN hands iGrip للقبضة Φ22
Fit with my bike Honda Rs150r, easy to install. Very comfortable with the this rubber. Fast delivery, wrap well and good quality with the price.
ALCAN hands Extreme Grip PCG-011
End cap may be a little Slant in structure.The dimensions of the Throttle side are too Exactly, so a lot of force is needed to insert it.Considering the strength of each part, I think you need to insert it slowly with PRESS.Also, if you insert it to the root, it will interfere with the Handlebar in ...
NGK المكونات القياسية B9HS 5810
[How is it used?Maintenance for consumable partsWas the one you received as per Image?As per Image, of course.Was the installation difficult?No problems with installation at all.How was your experience with it?No problem[Included Parts:were they on?It's not on.[Was there anything that disappointed y...
H.Craft ارتفاع powerignition لفائف 0. 2 Ω Singlele...
I installed it on my TZr250R 3XV1. It was possible to install it as it was without processing if the Pitch conversion Bracket which is attached was removed.The quality is that the Cover of the Plug cord connection part is loose, and Waterproof processing is necessary.The effect is that the Engine is...
PMC(Performance Motorcycle Creative) Z1 / Z2 حذاء ...
I haven't installed it yet, but it looks fine.Spring is enclosed, thank you.
DOREMI COLLECTION ض blinker القوس
I received the product today.I have not installed it yet, but the finish is good and the BlinkerCable terminal can be passed through without any problem.
ALCAN hands أسود المطاط قبضة غاما
Does what it needs to do. I mean it's cheap and holds my hands just fine like the stock waffle grips. If you have a handguard, you have to cut it though. It isn't something like a proper enduro grip with removable covers and all. But for the price, this is hard to beat. Maybe I'll get another pair i...
Dachi تكلم و حلمة مجموعة KSR
I built it with the Takasago HRim, but as a result, after two rides, all of the outer side of the rear was broken, leaving only two legs. It seems that the neck of Spoke is too long to fit into the hole of the hub Exactly. It is hard to say because it is a combination with the external Rim. It is a ...
(5.0)
?
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING